TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Description
Related
Programming
l
l
C- CLASS OF SERVICE
CP- 
 ACCESS TO PAGE ZONE 3 
Use this option to  (1) or prevent (0) extensions with this 
broadcasting announcements into Paging zone 3. This option also applies to
DISA trunks and incoming tie lines. Consider preventing incoming tie trunk
callers from using the system’s Paging zones. This option does not affect
Auto Page (refer to the Paging feature).
Conditions
None
Default  
Access to Page Zone  allowed (0).
Paging, Internal and All Call
CP-...

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO PAGE ZONE 
 
Instructions
To enter data on the PRF:
Step I lOn Table 7 for enter  to allow extensions Paging into zone 3. Enter I
to restrict extensions from Paging into zone 3.
To enter data at the programming terminal:
Step 1 lType CP. You see: COS  00: 00010000  00000001
Step 
 lEnter data for each COS you want to 
   Issue  

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO PAGE ZONE 2 
Description
Related
Programming
l
l
l
l
Feature ReferenceUse this option to 
 (0) or  ( 1) extensions with this COS from
broadcasting announcements into Paging zone 2. This option also applies to
DISA trunks and incoming tie lines. Consider preventing incoming tie trunk
callers from using the system’s 
 zones. This option does not affect
Auto Page (refer to the Paging feature).
None
Default  
Access to Paging zone 2 
Paging, Internal and  Call
CP-...

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO PAGE ZONE 2 
Instructions
To enter data on the PRF:
Step 1 lOn Table 2 for  enter 0 to allow extensions Paging into zone 2. Enter 1
to restrict extensions from Paging into zone 2.
To enter data at the programming terminal:
Step 1 Type CP. You see: COS  00: 00010000  00000001
Step 2 
Enter data for each COS you want to program.
 SOFTWARE    

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO PAGE ZONE 1 
Description
Related
Programming
P
l
P
P
P
Feature Reference
Use this option to allow (0) or prevent (1) extensions with this COS from
broadcasting announcements into Paging zone 1. This option also applies to
DISA trunks and incoming tie lines. Consider preventing incoming tie trunk
callers from using the system’s Paging zones. This option does not affect
Auto Page (refer to the Paging feature).
Conditions
None
Default Value
Access to Paging zone 1...

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO PAGE ZONE 1 
Instructions
To enter data on the PRF:
Step On Table 2 for  enter 0 to allow extensions Paging into zone 1. Enter 1
to restrict extensions from Paging into zone 1.
To enter data at the programming terminal:
Step  Type CP. You see: COS  00: 00010000  00000001
Step 2 
lEnter data for each COS you want to program.
2-68 
 CONFIGURATIONIssue 1-O 

C- CLASS OF SERVICE
 INHIBIT ACCESS TO ALL CALL PAGING 
Description
Related
Programming
P
l
P
P
P
l
l
Feature Reference
Use this option to allow (0) or prevent (1) extensions with this  from
broadcasting All Call Paging announcements. This option also applies to
DISA trunks and incoming tie lines. Consider preventing incoming tie trunk
callers from using the system’s Paging zones. This option does not affect
Auto Page (refer to the Paging feature).
Conditions
None
Default Value
Access to All Call Paging...

C- CLASS OF SERVICE
CP- INHIBIT ACCESS TO ALL CALL PAGING 
Instructions
Step 1 l
Step 1 l
Step 2 l
To enter data on the PRF:
On Table 2 
  enter 0 to allow extensions All Call Paging. Enter 1 to
restrict extensions from All Call Paging.
To enter data at the programming terminal:
Type CP. You see: COS # 
00: 00010000  00000001
Enter data for each COS you want to program.
    1-O 

C- CLASS OF SERVICE
CP- DIRECT TRUNK ACCESS AND TRUNK CAMP-ON 
Description
Related
Programming
l
Feature Reference
Instructions
Step 1 l
Step 1 l
Step 2 
Use this option to enable (1) or disable (0) Direct Trunk Access for extensions
with this COS. If allowed, extensions can also use Forced Trunk Disconnect.
Additionally, extensions with Direct Trunk Access capability can dial 2 to
Camp-On to a busy trunk. This option also allows extensions to program
System Speed Dial numbers.
Conditions
None
Default...

C- CLASS OF SERVICE
CP- OPERATOR CALL PICKUP 
  ONYX IV)
Description
 ted
Programming
Feature Reference
Instructions
Step 1 l
Step  l
Step 2 l
Use this option to enable (0) or disable (1) Universal Night Answerpickup. If
denied 
 the user cannot dial   or * and the operator’s extension
number to pick up UNA calls. If allowed (0). UNA pickup works normally.
Note that disabling UNA pickup also prohibits extensions from using Directed
Call Pickup to intercept day mode operator calls. Refer to the Night...