Home > TiE > Telephone > TiE Onyx 2, 3, 4, 5 Service And Programming Manual

TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Here you can view all the pages of manual TiE Onyx 2, 3, 4, 5 Service And Programming Manual. The TiE manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 301

C- CLASS OF SERVICE
  ONLY   AT NIGHT 
Feature Reference
Instructions
Step 1 
Step 1 
Step  
Issue 1-O
Toll Restriction
To enter data 
on the PRF:
On Table 
 for  enter 0 not to restrict extensions to Intercom calls at
night. Enter 
 to restrict extensions to Intercom calls at night.
To enter data at the programming terminal:
Type CP. You see: COS 
 00: 00010000  00000001
Enter data for each COS you  to program.
SOFTWARE CONFIGURATION
2-43 

Page 302

C- CLASS OF SERVICE
CP- ABSORB 
 DIGIT FOR DID  TIE TRUNKS 
Description
Related
Programming
l
l
l
l
l
l
l
l
Use this option to enable (1) or disable (0) first digit absorption for DID and
wink start tie trunks. If 
 enable this option. the  ignores the first
incoming digit on a DID or tie trunk call. If vou disable this option, the
system attempts to process the first digit. 
 option only applies to DID and
 start tie trunks. Immediate start tie trunks can’t have digit absorption.
When programmin
 this...

Page 303

C- CLASS OF SERVICE
CP- ABSORB  DIGIT FOR DID  TIE TRUNKS 
Feature Reference
Instructions
Step 1 l
Step 1 
Step  l
Issue 1-O
Direct  Dialing
Tie Lines
To enter data on the PRF:
On Table 
 for BYO: 1. enter 0 to disable first digit absorption. Enter 1 to
enable first digit absorption.
To enter data at the programming terminal:
Type CP. You  0001000000000-000000001
Enter data for each COS you  to program.
 CONFTGURATION 2-45 

Page 304

C- CLASS OF SERVICE
CP- INHIBIT 
 TRANSFERS TO EXTENSION 
Description
Use this option to 
  Operator Assistance (OPA) transfers for
extensions with this COS. If denied 
 the OPA will not transfer calls to
extensions 
 this Class of  If allowed  the transfer can go
through if the estension is free. This option is not available in VS.
Related
Programming
l
l
Feature ReferenceWhen programming DID and tie trunks. refer to CP- Absorb 1st Digit for DID
and Tie Trunks (BYO: I) above.
Conditions
None
 Value
OPA...

Page 305

C- CLASS OF SERVICE
CP- INHIBIT 
 TRANSFERS TO EXTENSION 
Instructions
To enter data on the PRF:
Step I lOn Table  for   enter 0 to  OPA transfers. Enter 1 to disable
OPA transfers.
To enter data at the programming terminal:
Step 1 lType CP. You see: COS  00: 00010000  00000001
Step 
 lEnter data for each COS   to program.
Issue 1-OSOFTWARE CONFIGURATION2-47 

Page 306

C- CLASS OF SERVICE
CP- ALLOW BELL STANDARD FOR CAS 
Description
Related
Programming
l
Feature Reference
Instructions
Step 1 
Step 1 l
Step 2 
Use this option to enable (1) disable (0) Bell Standard signaling for
Centralized Attendant Service (CAS). If the CAS hub system is not a
 PBX, enable this option. When the hub system is a  PBX,
disable this option (0). This causes incomplete transfers to an ONYX branch
system to ring back to the CAS operator. To get the most performance out of
the CAS feature,...

Page 307

C- CLASS OF SERVICE
CP- ALLOW 
 OP.  FOR DID (BYO:O)
Description
Related
Programming
l
l
Feature Reference
Instructions
Step 1 
Step 1 l
Step 
Use this option to   or  (0) All Call Intercept for DID calls to
extensions with this COS. If an 
 has All Call Intercept. the system
reroutes all the estension’s DID calls to the attendant.
None
Default 
All Call Intercept for DID calls disabled (0).
Direct 
Inward Dialing (DID)
CP- Absorb 1st Digit for DID and Tie Trunks 
 If QO- DID
Intercepts (Absorb 1st...

Page 308

 CLASS OF SERVICE
CP- 
 CALLBACK PRIORITY 
Description
Related
Programming
Feature Reference
Instructions
Step  
Step  
step  
Use this option to allow  or  (0) extensions with this COS trunk
Callback priority+.An extension  priority receives Callback from a trunk
before other extensions that also have Callbacks waiting. Without priority,
the system processes the trunk Callbacks on a first in, 
 out basis. This
option has no effect on Callbacks left at an extension.
Conditions
More than one extension...

Page 309

C- CLASS OF SERVICE
CP- 
 PRIVACY 
Description
Related
Programming
Feature 
Instructions
Step  l
Step 1 
Step 2 
Issue 1-O
Use this option to enable  or disable (0)  for extensions  this
COS. If an extension has 
 another  cannot intrude on its
calls. Privacy also blocks Call 
 (Camp-On) tones and Silent 
Conditions
Default 
Privacy not  (0).
Intrusion
CP- 
 Break-In (Intrusion)    Intrusion for each
Class of Service.
E- Extensions, 
 Class of Service  Assign Class of Service to extensions.
Privacy
E-...

Page 310

C- CLASS OF SERVICE
CP- 
 EXTENDED  
Description
Related
Programming
Feature Reference
Instructions
Step  
Step  
Step  
Use this option to enable (1) or disable (0) Estended Ringing for extensions
 this COS.
Default 
Extended Ringing disabled (0).
Extended Ringing
E- Extensions,  Class of Service  Assign a Class of Service to each
extension.
Extended Ringing
To enter data on the PRF:
On Table 2 for 
 enter 0 to enable Camp-On for each  Enter 1 to
disable Camp-On.
To enter data at the programming...
Start reading TiE Onyx 2, 3, 4, 5 Service And Programming Manual

Related Manuals for TiE Onyx 2, 3, 4, 5 Service And Programming Manual

All TiE manuals