Telrad Digital Digital Family Of Systems Operating Instructions

76-110-0165/G, Issue 1
34
3-34
To return to the original call
Avanti 3025/
3020 sets
1. Press [HOLD].
2. Press the worktable softkey for the call left on hold (
{ 8880}/
{HOLD 8880}
).
Any other set
with an appear-
ance button1. Press [HOLD].
2. Press the flashing appearance button for the call left on hold.
Any set with no
appearance
button1. Press [HOLD].
2. Press [FEATURE] and [3][3].
- You are now connected to the original call again.
3.12.6 Making an outside line button available
In order to make...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
35
3-35
3.13 HOLD
While you are in conversation with a caller on an outside line, you can 
place the call on hold. You are then free to use your extension for re-
ceiving or making other calls, and may perform any dialing operation, 
before returning to the outside line that is on hold.
NOTE
PBX mode telephone sets can place internal 
calls on hold also. However, an internal call on 
hold cannot be transferred. Transfer of internal 
calls can only be...

76-110-0165/G, Issue 1
36
3-36
not answer within the recall time (defined in the system setup), the sys-
tem will transfer the call to the Attendant position (during day service), 
or drop the call (during night service), depending on system setup.
To return to a call on hold from any set where the line is flashing:
• Press the button of the flashing outside line.
3.13.4 Last hold
To return to the last call which you placed on hold 
(if you placed a number of calls on hold)
Avanti 3025/
3020 sets
•Press...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
37
3-37
Follow the procedure above, but before you hang up, wait for the exten-
sion to answer.
When the extension user answers, announce the call.
If the intended party wishes to accept the call:
• Hang up.
- The call is transferred automatically.
NOTE
Calls can be transferred to a hunt group. To do 
so, follow the procedures described above, and 
dial the hunt group access code instead of the 
specific extension number. (see Section 3.24, 
below)....

76-110-0165/G, Issue 1
38
3-38
ternal pages may be defined within the system. 
1. Press [TRANSFER] and dial the appropriate internal or external 
page zone access code.
- The call is placed automatically on inclusive hold.
- The telephone display
 shows the outside line number, PAGE and 
the zone number.
- An outside line indicator will flash at all extensions that have a but-
ton for that line.
2. Listen for a double tone burst.
3. Announce the call, mentioning on which line the call is waiting.
4. Hang...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
39
3-39
- The transfer is confirmed.
3. Hang up.
3.14.6 Camp on
If the required extension is busy when you attempt to transfer the call, 
you can camp on the call at the extension.
To camp an incoming call on a busy extension
(After having attempted to transfer the call as described above and 
hearing busy tone)
• Hang up.
- The extension called will hear a camp-on tone.
- The call will ring the required extension as soon as it becomes 
available.
To...

76-110-0165/G, Issue 1
40
3-40
3.15.1 Group pickup
If
 your extension is defined as belonging to a pickup group, you may re-
trieve
 calls ringing or recalling at another extension of your pickup group, 
even if you dont know what extension, outside line or outside line group 
the call is on.
If you hear an extension ringing from within your pickup group:
All sets•Press [PICK UP].
- Display telephones show 
PICK UP.
To complete the pickup:
• Dial the ALL access code ([
*]). (Avanti 3025/3020/3015D sets...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
41
3-41
2. Press [FEATURE] (or dial FEATURE access code) and [6][6].
- The telephone display shows MEET ME PAGE
3. Dial the page zone access code.
- The page call is canceled at all extensions in the page zone.
- You are connected to the page initiator.
- The telephone display shows the page initiators name or number.
If the page initiator has a call on hold, she may transfer it to you by hang-
ing up (see Section 3.14.3, above).
3.16 DO NOT DISTURB...

76-110-0165/G, Issue 1
42
3-42
Avanti 3020/
3015D sets1. Press PROGRAM softkey.
- PROGRAMMING appears on the display.
2. Press
 {DND MSG}.
- SELECT A MSG: appears on the display.
3. Use 
{NXT SCREEN} (3025 use scrolling icon ) to scroll through
the list of DND messages available.
4. Press the softkey adjacent to the desired message. Use the dialpad
to edit the message if necessary.
5. Press
 {SAVE} to save the message.
- Dial tone is heard and the selected message is saved.
Avanti 3015/
3000   sets1....

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
43
3-43
All other sets1. Press [#].
- Display sets show 
CANCEL
2. Press [PROGRAM].
- Display sets show 
CANCEL PROG
3. Press [DND].
3.17 CALL FORWARDING 
There are three ways of forwarding calls to another destination:
CALL FORWARD - forwards calls without them ringing at your exten-
sion;
CALL FORWARD BUSY - forwards calls arriving at your telephone 
when your telephone is busy;
CALL FORWARD NO ANSWER - forwards calls which ring at your tele-
phone...