Telrad Digital Digital Family Of Systems Operating Instructions

76-110-0165/G, Issue 1
14
3-14
To use LCR
All sets1.  Press [LCR],
or
Dial the LCR access code (usually “9”, but consult your System
Administrator for the correct LCR access method in your system).
   - Dial tone is heard and display sets show 
LCR.
2. Dial the external number.
If you press [FLASH] during an LCR dialing attempt, you can dial im-
mediately through LCR, without having to press the [LCR] button again.
NOTE
When you use LCR, the call will automatically 
move to a floating button (if...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
15
3-15
3.5.10 Telephone lock
You can prevent people from making outside calls from your telephone.
To lock your telephone
All sets1. Dial the LOCK access code or press [LOCK] (if defined).
   - Display sets show 
ENTER CODE:
2. Dial your Executive Credit Code (see your System Administrator).
3. Hang up.
   - The telephone lock dialing restrictions are in effect. 
   - The [LOCK] button, if defined, lights. 
To unlock your telephone
• Repeat the above...

76-110-0165/G, Issue 1
16
3-16
3.6 CONFERENCE
3.6.1 Setting up a conference call
Up to eight parties, any of which may be outside parties, may converse 
together on a conference call.
The conference feature provides various options:
• To initiate a conference call.
• To add more parties to the existing conference.
• To remove outside line parties to the existing conference.
• To leave the conference call temporarily.
• To return to the conference after leaving temporarily.
• To leave the conference call...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
17
3-17
To 40 an outside line party to the conference 
Avanti 3025 set• Press the SPLT softkey of the outside line you want to remove from 
the conference.
•Press 
{DROP}.
   - The party is disconnected.
To leave the conference call temporarily
All sets•Press.
You will hear dial tone.
You are now free to use your set as you wish and still have the option 
to return to the conference.
NOTE
If, after exiting from a conference, you complete 
another call,...

76-110-0165/G, Issue 1
18
3-18
All participants in the intercom loop conference are local extensions 
(networked extensions and outside lines cannot be included).
To program a list of participants
1. Press 	 (program) icon and [CFLn] (a predefined conference loop 
button,
 where n = 1 to 10. See System Administrator).
Display shows:
2. Enter the DNs of the desired participants or press the associated
DSS buttons, one at a time. Only legal DNs will be registered. Press
[FLASH] to delete the DN currently...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
19
3-19
To join a Meet me conference
• Dial the Meet me conference DN (see System Administrator).
You hear a special tone or music on hold (if you are the first caller), 
or ringback tone after which you are joined in conference with other 
callers.
To exit a Meet me conference
• Hang up.
Remaining participants hear a special tone indicating you discon-
nected.
3.6.4 To patch together two outside lines
You may connect two outside parties via your...

76-110-0165/G, Issue 1
20
3-20
To activate a Travel COS
All sets1. Press [TC] (if defined) or dial the Travel COS access code.
Display sets show 
ENTER NO:
2. Dial the desired DN or press [*] for a Global COS number.
Display sets show 
ENTER CODE:
3. Dial the appropriate ECC code or Global COS password.
-The [TC] indicator (if defined) lights.
- The Travel COS is currently active for a predefined time. 
- You may now access an outside line and place any call allowed 
under the currently active COS. 
3.8...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
21
3-21
6.4.6). 
To make an announcement
1.  Dial the required page zone code or press a dedicated PAGE ZONE 
button (if defined).
   - Display sets show PAGE, and the page access code.
   - You will hear a double tone burst.
2.  Make your announcement.
You might not have access to all zones. If you try to dial a zone to which 
you do not have access, you will hear a retry tone.
Paging time may be limited. If the time limit is exceeded, you will hear a...

76-110-0165/G, Issue 1
22
3-22
been left at that extension and you will be unable to leave your mes-
sage.
NOTE
Only a Basic Message can be sent to another 
networked DIGITAL systems extension.
3.10.1 Reading and 
answering messages
When messages have been received at your station:
Avanti 3025/
3020 setsThe number of waiting messages (e.g. 5 MESSAGES) appears in the 
display, the [MSG] indicator lights and, on the 3025 set, the message 
icon 

 appears
or
The text of the last message sent and the senders...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
23
3-23
2. Press [MSG] (again).
The extension whose message is currently displayed is called.
Non display
sets• Press the flashing [MSG] button.
The extension which left a message is called. If more than one mes-
sage has been left, the first one sent is answered first.
NOTE
If the called extension answers, the message is 
deleted from.your extension’s message list. If the 
called extension does not answer, the message 
is retained. If the called...