Telrad Digital Digital Family Of Systems Operating Instructions

76-110-0165/G, Issue 1
4
3-4
3.3.6 Allowing others to hear your call (Speaker Monitor)
This feature is used to enable other people in the room to hear your con-
versation, while you are using the handset. When the feature is activat-
ed, the people listening in will hear the other party via the set speaker. 
The set microphone will remain inactive.
To activate speaker monitor during a regular handset call
All Avanti sets
•Press [FEATURE] and then [SPKR].
-[SPKR] button indicator turns on.
- Other party...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
5
3-5
3.4 INTERNAL CALLS
Your extension can ring another extension directly.
NOTES
If your extension is programmed with a Preferred 
line (see Section 3.8 , below), you must press 
[ICM] before you can dial another extension.
For calling an extension in a networked DIGITAL 
system, see Section 6.4 .
You can activate the Note pad feature during an 
internal call. See Section 3.5.11 
3.4.1 Making an internal ringing call
All Avanti sets1. Dial [1]....

76-110-0165/G, Issue 1
6
3-6
The duration of an HFAB call may be limited by the system. If the pre-
determined time of the handsfree conversation elapses, you hear a sec-
ond tone burst, the call is disconnected, and then you hear dial tone.
If the called party lifts the handset during the handsfree answerback 
conversation, the call is converted into a regular internal call (
CONV re-
places 
HF on the telephone display), and the duration of the call is no 
longer limited.
NOTE
The Note pad feature...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
7
3-7
elapsed time followed by CO and the DN or name of the outside
line.
2. Talk to the parties.
Depending on the way the system is programmed, the warning tone
may be repeated periodically for the duration of your participation in
the conversation.
3.4.4 Executive intercom
If your extension is programmed with the executive intercom feature, 
you will be able to call an extension defined as your secretarys, even if 
it is in the Do Not Disturb state...

76-110-0165/G, Issue 1
8
3-8
- When the extension answers, a call is established and the call-
back request is automatically canceled.
To cancel a callback request
You can cancel a callback request before or during callback ringing:
3025/3020/
3015D sets•Press {CNCL CBACK}.
The LED indicator goes off and the callback request is canceled.
3015 set•Press [CB/QUE].
The indicator goes off and the callback request is canceled.
3000 set•Press [#].
Display sets show 
CANCEL.
•Press [FEATURE] and dial [2][2]....

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
9
3-9
3. Press {VIEW} to show matching names or press the button with the
desired name if it already appears.
- The party is dialed automatically.
NOTE
The letters to be dialed from the dialpad are:
For A, B and C dial 2
For D, E and F dial 3
For G, H and I dial 4
For J, K and L dial 5
For M, N and O dial 6
For P, Q, R and S dial 7
For T, U and V dial 8
For W, X, Y and Z dial 9
If the name is misspelled, not defined, or if there is more than one user...

76-110-0165/G, Issue 1
10
3-10
release the line.
To enter pauses in a dialing sequence
When your DIGITAL system is connected behind another Private 
Branch Exchange (PBX), the PBX may take a few seconds before it pro-
vides an outside line. Thus, when speed dialing, it may be necessary to 
enter a pause after the digits of the outside line access code.
By pressing [PAUSE], the system allows sufficient time to access the 
line. A number of pauses may be entered. The length of the pause time 
is...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
11
3-11
3.5.4 Account code (ACC)
The system allows you to enter an account code on outgoing or incom-
ing external calls. The code entered is printed out on the Station Mes-
sage Detail Recording (SMDR) printer.
The entry can be voluntary (the user dials the code before or after seiz-
ing the outside line), or it may be forced (the user cannot seize an out-
side line without first entering the code). The extension may also be 
programmed so that the...

76-110-0165/G, Issue 1
12
3-12
All other sets1. Press the [ACC] button (if you have one defined) or press 
 [FEATURE] and dial [2][8].
Display sets show 
ACC.
2. Dial an account code string (up to 11 digits).
On display sets, the digits scroll from right to left.
3. Press [#] to complete the process.
The code may be changed as many times as desired during the conver-
sation, by the procedure above. Also, if you have not yet pressed [#] or 
[SAVE] button to enter a new code, you may start the procedure...

Section 3: AVANTI FAMILY SETS OPERATING INSTRUCTIONS
13
3-13
When the outside line becomes available, the system rings your exten-
sion. When you answer, you are automatically connected to an outside 
line.
To enter an outside line queue
After an attempt to obtain an outside line resulted in a busy tone:
Avanti sets
with display•Press {TKQUE}.
   - Dial tone is heard, the {CNCL TKQUE} softkey appears and the [CB/
QUE] LED indicator lights
All other sets1. Press [CB/QUE] (if defined) or press [FEATURE]...