Starplus Triad Xts Digital Telephone Systems Station User Guide

							100 Volume Control
The B/Z ringer switch is located on the bottom of the 
telephone near the line jacks. This switch should be set to the 
Z mode for business/hospitality applications and to the B 
mode for residential applications.
For single line telephones that are not equipped with a 
volume control slider switch or to increase the volume 
greater than that allowed by the slider switch, use the 
following steps.
1. Dial [638].
2. Dial a valid number (0-9) to select a volume level.
3. Press HOLD.
The MSG light and the Line In Use (LIU) LEDs will not 
operate when set in the B ringer mode. 
						

							Worksheets 101
Worksheets
Flexible Button Programming Worksheet
Speed Dial Bin Programming Worksheet
1234
5678
9101112
13141516
17181920
21222324
BIN 9000 BIN 9010
BIN 9001 BIN 9011
BIN 9002 BIN 9012
BIN 9003 BIN 9013
BIN 9004 BIN 9014
BIN 9005 BIN 9015
BIN 9006 BIN 9016
BIN 9007 BIN 9017
BIN 9008 BIN 9018
BIN 9009 BIN 9019 
						

							102 Default Numbering Plan
Default Numbering Plan
Function Code
911 Attnd Alert View/Del (reqsbtn) 608/608+FLASH

Account Code (reqs btn) 627
ACD Call Factor* (reqs btn) 580+[UUU]+[FFF]
ACD Call Qualifier* 570+[ YYY ]
ACD CIQ Displ Btn* (specific ACD 
grp) (reqs btn)579+[UUU]
ACD Group* (group 1-16) 550-565
ACD Help* (reqs btn) 574
ACD Member Status* 573
ACD Overflow Avail/Unavail* 578
ACD Login (Primary)* 572+[UUU]+[UUUU]
ACD Login (Secondary)* 582+[UUU]+[UUUU]
ACD Logout (Primary)* 571
ACD Logout (Secondary* 581 
ACD Supervisor Display* 577+[UUU]
ACD Supervisor Login* 576+[UUU]+[UUUU]
ACD Supervisor Logout* 575+[UUU]
ACD*/UCD Avail/Unavail 566
ACD*/UCD CIQ Stat Displ (any grp) 567+[UUU]
Answering Machine Ring 654+[0]
Answering Machine Speaker 654+[1]
Attnd 0 
Digital
Electronic
Attendan
t
SLT 
						

							Default Numbering Plan 103
Function Code
Attnd Clear Alarm ( T-1) 606

Attnd CO Line Ext (Off-Net) Fwd 603+[NNN]+[ YYYY ]
Attnd Custom Message 694+[XX]+message
Attnd Day/Night/Special (reqs btn) 631 (DND key)
Attnd Directory List Programming 693
Attnd Disable Outgoing CO Line 602+press CO line 
btn
Attntd Override (reqs btn) 601
Attnd Setting Time and Date 692+date & time
Attnd Unavailable 607
Attnd Voice Mail Alarm Clear 656
Background Music (Ch 3=MPB3) 632+[0 , 1, 2, or 3]
Call Back 622
Call Coverage - Non-Ring (reqs btn) 647+[XXX]
Call Coverage - Ringing (reqs btn) 646+[XXX]
Call Forward 640+[C]
Call Forward - External (Off-Net) [640]+[6]+[YYYY ]
Call Forward - Follow Me 642+[XXX]+[C]+dest
Call Park (group 1-8) 430-437
Call Park - Personal 438
Call Park - Station 439+[XXX]
Call Park Pickup - Station #6+[XXX]
Call Park Pickup - System (group 1-8) #430-#437
Caller ID Display (Answered Calls) 659
Digital
Electronic
Attendan
t
SLT 
						

							104 Default Numbering Plan
Function Code
Caller ID Display (Unans Calls) 635

Caller ID Name/Number (reqs btn) 653
Calling Forward Override 5#+[XXX]+press[B]
Calling Sta Handsfree Mde Ovride 7#+[XXX]
Calling Sta Tone Mode Override 6#+[XXX]
Camp On (8 btn) 620
Clear Call Fwd, DND, Personal Msg 662
CO Line (Idle) Direct Access 88+[LLL]
CO Line Grp Access Code (grp 0-23) 800-823
CO Line Grp Access Code (all grps) 824
CO Line Queue 621
CO Line Queue Cancel 626
Conference (8 btn) (reqs btn) 624
Dial-By-Name 66(Admin 772**)
Directory Dial 680
Do Not Disturb 631 
DTMF Receiver Test 657
Executive Override 625
Flash (Centrex) (8-btn digital) 660
Group Call Pick Up (reqs btn) #0 (Admin 771**)
Headset Mode 634
HPT (8-btn digital) 667
Hunt Group (group 1-8) 450-457
Intercom Button (reqs btn) 645
Digital
Electronic
Attendan
t
SLT 
						

							Default Numbering Plan 105
Function Code
Keyset Mode 648+[#,
6]
Last Number Redial [SPEED]+[#]
LCR (E911 active on CO Line) 800 (Admin 773**)
LCR (if active) or CO Line Group 1 9
Loop Key (reqs btn) 89
Message Wait 623
Modem 499
Modem - Voice Mail Access 498
Mute (8 btn) (reqs btn) 629
Name in Display 690
Night Service (reqs btn) 604
Off Hook Voice Over (reqs btn) 628
Page - All Call 700
Page - Ext Zone All, 1, 2, 3 (MPB2) 760-762 (763=MPB2)
Page - Internal Zones 1-8, All 701-709
Page - Meet Me (Answer) 770
Personal Messages 633+[ZZ] 
Release Button (reqs btn) 641
Repeat Redial 643
Ring Down/Hot Line/Off-Hook Pref 691+[BB]
Ring Tone 695+[RR]
Save Number Redial [SPEED]+[6]
Serial Number (MPB) 609
SLT Conference Park 664
Digital
Electronic
Attendan
t
SLT 
						

							106 Default Numbering Plan
Function Code
SLT Directed Call Pickup #1

SLT Message Wait Answer 663
SLT Speed Dial 668+[YYYY ]
SLT Speed Programming 661+[YYYY ]
SLT Volume 638+[ V ]
Software Identification (MPB) 610
Software Version (MPB) 605
Speed Dial [SPEED]+[ YYYY ]
Sta Numbers (Fixed) - MPB1/MPB2 100-195 / 100-351
Station/Port Fixed Number 611
Station Relocate 636+[XXX]
Stop Trace 658
UCD Group (group 1-8) 550-557
Unanswered CO Call Transfer 639
Universal Day/Night Answer #5 (Admin 774**)
VM Group (group 1-8) 440-447
VM Msg Cancel ( VM Port only) 421+[MMMM]
Voice Mail Msg Set ( VM Port only) 420+[MMMM]
VM Msg Set w/cnt ( VM Port only) 422+[MMMM]
VM One Touch Record (reqs btn) 649+[ VVV ]
VM Pse/Res Rec (Dig VM) (reqs btn) 655
Voice Mailbox Btn (reqs btn) 460-467+[ VMID]
Voice MB Btn - Remote (reqs btn) 468+[ VMID]
Volume Increase/Decrease (8 btn) 638+[#]/[6]
Digital
Electronic
Attendan
t
SLT 
						

							Default Numbering Plan 107
 LEGEND --
B = Button w/ feature code: 
622=Call Back, 620=Camp 
On, 625=Executive Override, 
623=Message Wait, 
628=OHVO
BB = Button Number
C = Call Forward Condition Code 
(6-9=All Calls, No Answer, 
Busy, Busy/No Answer)
FFF = ACD* Call Factor (000-999)
LLL = CO Line Number (001-048, 
MPB1; 001-144, MPB2)
MMMM = 2- to 4-digit Mailbox 
Number
NNN = CO Line Group Access 
Code of group to be 
forwarded
(801-823 = CO Group 1-23, 
824 = All CO Groups)
RR = Ring Tone Number (00-36)
UUU = ACD Group 1-16* 
(550-565)UUUU = ACD Supervisor/Agent ID 
Code (0000-9999)
V = Volume Control Level (0-9)
VVV = Voice Mail Group Number 
(440-447)
XX = Custom Message Number 
(21-30)
XXX = Intercom Station Numbers
YYY = Last three digits of Speed 
Dial Bin Numbers (for use 
with ACD Call Qualifier)
YYYY = Speed Dial Bin Numbers 
(9000-9999)
ZZ = Personalized Messages
* = Feature is available with 
optional software
** = The code is assigned in Flash 
50, Page B, Button #11 
						

							»   »   »   »   »   »   »   »   N O T E S   »   »   »   »   »   »   »    
						

							STARPLUSTM Triad XTS Digital Systems Quick Reference Card
FIXED FEATURE BUTTONS
•CAMP-ON Button -- Enables you to alert a busy
party that an outside line is on hold and waiting
for them.
CONF (CONFERENCE) Button -- Used to
establish and build conference calls.
FLASH Button -- Used to terminate an outside
call and restore dial tone without having to
hang up the handset. It is also used to transfer
calls behind a PBX or Centrex within those
systems.
FORWARD (FWD) Button -- Allows you to
forward your calls to another station.
HOLD Button -- Enables you to place an outside
caller on hold.
H-T-P Switch -- Allows the user to select the ICM
signaling mode: Handsfree, Tone, or Privacy.MSG (MESSAGE WAIT) Button -- Allows you to
initiate a message waiting indication at stations
that are busy, unattended, or in Do Not Disturb.
Message Waiting Callback request left at your
station is indicated by a flashing MSG WAIT LED.
MUTE Button -- Allows you to switch the built-
in microphone on or off when using the
speakerphone, or the handset microphone
when using the handset.
ON/OFF Button -- Enables you to make a
telephone call without lifting the handset. It
turns the telephone on and off when using the
speakerphone.
SPEED Button -- Provides you with access to
speed dialing, save number redial and last
number redial. This button is also used to
access flexible button programming.
TRANS (TRANSFER) Button -- Used to transfer
an outside call from one station to another.
VOLUME BAR -- Allows the user to adjust
speakerphone and handset volume.
CALL FORWARDING
1. Press the FWD button or dial [640].
2. Dial the desired Call Forward code:
[6] = All Calls
[7] = No Answer
[8] = Busy
[9] = Busy/No Answer
3. Dial station number where calls are to be
forwarded. Confirmation tone sounds.
4. Replace handset or press ON/OFF button.
ESTABLISHING A CONFERENCE
Only stations that have Conference enabled will be
able to initiate a Conference.
1. Lift the handset.
2. Select intercom station or dial desired outside
party. When called party answers, press the
CONF button.
3. Add next conference party by selecting
another outside line or intercom station.
4. Press the CONF button again and repeat
previous step in a cycle, until all parties are
contacted.
5. When last party answers, press the CONF
button twice. All parties are connected.
TERMINATING A CONFERENCE
To terminate a Supervised Conference, the confer-
ence initiator, replaces handset or presses ON/OFF
button.
To terminate an Unsupervised Conference, press
the flashing CONF button while on-hook.UNSCREENED TRANSFER
1. Press TRANS button and dial station number.
2. When the called extension begins to signal,
hang up to transfer the call. 
3. Replace handset or press ON/OFF button.
SCREENED TRANSFER
While connected to an outside line:
1. Press station button where call is to be
transferred (if programmed on your
telephone),
-or-
Press the TRANS button and dial the desired
station number.
(The called extension signals according to the
intercom signal switch position.)
2. When that extension answers, announce the
transfer.
3. Hang up to complete transfer.
LEAVING A MSG WAITING INDICATION
If you dial a station that is busy, unattended, or in
Do Not Disturb, you can leave a message waiting
indication.
1. Press the ON/OFF button.
2. Dial the desired intercom station. A busy tone
or DND tone is heard.
3. Press the MSG button. The called party’s MSG
button LED will flash slowly.
4. Press the ON/Off button to end the call.