Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

Repeat Redial2-243
Chapter 2 - Features and Operation
Repeat Redial
Description
The Repeat Redial feature allows a digital key station to press a flexible button and redial a 
busy or no-answer number after a specific interval. The user is signaled via a queue call back 
indication.
The RPT REDIAL flexible button flashes at the call back rate of 120 ipm for 15 seconds. If the 
station:

Doesn’t answer within the 15 seconds, the call back is canceled. The system retains the 
last call the user made.

Is...

2-244Relay Programming
Chapter 2 - Features and Operation
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer, 
they may repeat the step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto 
Redial function is cancelled.

SINGLE LINE TELEPHONE
Not applicable
Conditions
»...

Remote Administration2-245
Chapter 2 - Features and Operation
2. Press the button that corresponds to the desired relay. That button lights. Enter one of 
the following sequences on the keypad:
[1] + [1, 2, or 3] First three External Page Zones
[2] + [1 through 8] = RAN Start (RAN Announcement Tables 1-8)
[3] = PFTU Control
[4] + STA # = Loud Bell
[5] + CO # = CO Line Control
[0] =  Disables Relay
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Each time the user...

2-246 Re mo t e Syste m Mo ni to r A n d  Mai n ten a n c e
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Modem Answer Timer is set for 25 seconds.
Database Upload/Download
Description
Database Upload/Download provides a maintenance facility which is added to the Remote 
Administration routine. This routine permits downloading of the database to a PC, when a 
software change is made or when the system must be initialized...

Ring Down/Hot Line/Off-Hook Preference 2-247
Chapter 2 - Features and Operation
Ring Down/Hot Line/Off-Hook Preference
Description
The Off-Hook Preference feature lets a key station user automatically have a flex button 
selected when going off-hook or when pressing the ON/OFF button. An SLT user may have a 
particular CO line or a CO line group selected automatically when going off-hook. This may 
be established in programming so that key station users can select and/or change their 
off-hook preference...

2-248 Ring Down/Hot Line/Off-Hook Preference
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of 
the following messages displays:
2. Enter the range of fixed station numbers (100-351) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and...

Ring Down/Hot Line/Off-Hook Preference 2-249
Chapter 2 - Features and Operation
7. Enter a 0 or 1 to disable/enable the Off-Hook Preference as follows:
[0] = Disables programmable preference so users may not change the off-hook 
preference as set in programming. Also use for SLT stations.
[1] = Enables programmable preference to key station users so that they may change the 
off-hook preference through a user dial code.
8. Press HOLD. A confirmation tone sounds and the display updates.
DEFAULT … All...

2-250Save Number Redial (SNR)
Chapter 2 - Features and Operation
Conditions
» Single line telephones can bypass Off-hook Preference by doing a hookflash and then 
dialing their extension number.
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number 
to be programmed, you will get the station that is in port/station 100.
Save Number Redial (SNR)
Description
Any number dialed on an outside...

Serial Number (MPB)2-251
Chapter 2 - Features and Operation
Serial Number (MPB)
Description
When feature code [609] is dialed on a display telephone, the serial number of the MPB 
displays. The serial number is used when you activate or upgrade the system.
Operation
Dial feature code [609].
Single Line Telephone
Compatibility
Description
The XTS supports industry standard 2500-type (DTMF) single line telephone (SLT) 
instruments. When the Single Line Interface Board (SLIB) is installed in the XTS, a...

2-252Single Line Telephone
Chapter 2 - Features and Operation
SLT Hook Flash Timer
Description
The SLT Hook Flash Timer determines how long an SLT user presses the hook switch for it to 
be considered a valid on hook (disconnect) request. An on-hook shorter in duration (but 
longer than the Hook Switch Bounce Timer) is considered a Hook Flash (transfer) request. 
Refer to  Figure 2-17 on page 2-253.
The SLT Hook Flash Timer setting is variable from 0.5-2.0 seconds.
Programming Steps
1. Press the SLT HOOK...