Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

Personal Messages2-233
Chapter 2 - Features and Operation
To cancel a custom message:
1. Either dial the Personal Messages code [633] + [00],  dial [662], or press the DND button.
2. Replace handset. DND button LED extinguishes.

SINGLE LINE TELEPHONE
SLT users can use custom messages (21-30) as described above. Unique custom messages 
(18-20) are not applicable. SLT users cancel the use of a custom message by using feature 
code 662.
Conditions
» This feature is not available to attendant stations....

2-234Personal Messages
Chapter 2 - Features and Operation
3. Enter the date/time using buttons on the dial pad as shown in the following table.
Figure 2-16: Other Keypad Codes (Date and Time)
4. Press HOLD to enter message. A confirmation tone is received and the DND button LED 
flashes.
To cancel the message:
1. Either dial the Personal Messages code [633] + [00],  dial [662], or press the DND button.
2. Replace handset. DND button LED extinguishes.

SINGLE LINE TELEPHONE
Not applicable
Scrollable...

Personal Messages2-235
Chapter 2 - Features and Operation
Operation
To select a Scrollable Canned Message:
1. Dial [633]+[#] on the dial pad,
-or-
Press the PERSONAL MESSAGES button. Clear Messages is always first. The following 
message displays:
2. Press [#] to scroll through the messages or press [

] to scroll backward through the list.
3. Scroll forward through the messages in the following order. The scroll is a rolodex-type 
scroll.
4. When the desired message is shown on the LCD display, pressing...

2-236Preferred Line Answer
Chapter 2 - Features and Operation
Personal Messages Flexible Button
Description
You can program the code [633] onto a flexible button to speed access to select and use 
messages.
Operation
To program the Personal Messages Flexible Button:
1. Press the SPEED button twice.
2. Press the desired flexible button. LED flashes.
3. Dial [633]+[#] on the dial pad. A confirmation tone sounds.
To use the flexible button, press that flexible button, then either:
Dial the 2-digit message...

Preferred Line Answer2-237
Chapter 2 - Features and Operation
2. Enter the range of fixed station numbers (100-351) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the PREF LINE ANSWER flexible button...

2-238Privacy Release
Chapter 2 - Features and Operation
Privacy Release
Description
Privacy is insured on all communications in the system. If desired, the customer may elect to 
disable the Automatic Privacy feature, thus allowing up to seven other stations to join in on 
an existing CO Line conversations.
Per CO Line Option
Description
The Per CO Line feature allows programming of each CO line individually for privacy. This 
feature is useful for maintaining security on such lines as data lines,...

Privacy Release2-239
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 (Page A) is lit. The following message displays to indicate current 
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the PRIVACY flexible button (FLASH 40, Page A, Button #5).
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation...

2-240Privacy Release
Chapter 2 - Features and Operation
Per Station Option
Description
The system provides privacy on all communications in the system which prevents other 
stations from accidentally entering an existing conversation. However, the system provides 
the ability for a station to join an existing outside CO line conversation (on a per station 
basis). Each station can be granted the privilege to join an existing CO line conversation by 
simply pressing the CO line button of a CO line in...

Privacy Release2-241
Chapter 2 - Features and Operation
2. Enter the range of fixed station numbers (100-351) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the PRIVACY flexible button (Button #5). The...

2-242Private Line
Chapter 2 - Features and Operation
Private Line
Description
Private line programming allows certain lines to ring at a specific station only. When placed 
on Hold, these lines are active at the programmed station only. A private line can be 
transferred to other stations, provided the station receiving the call has a loop button or 
direct appearance of that CO line. Refer to “CO Line Group Programming” on page 2-74, “Line 
Group Access - Station” on page 2-72, and “Flexible Button...