Sharp Mx 4100n Owners Manual

7-69
SYSTEM SETTINGS
Contents
Other Settings
Copy Exposure Adjustment
This is used to adjust the exposure level when [Auto] is 
used for the copy exposure.
Color
Use this to set the copy exposure level in color mode for the 
document glass and for the automatic document feeder.
Black & White
Use this to set the copy exposure level in black & white 
mode for the document glass and for the automatic 
document feeder.
Rotation Copy Setting
When the original and paper are placed in different 
orientations,...

7-70
SYSTEM SETTINGS
Contents
Disabling Deletion of Job Programs
This is used to prohibit the deletion and changing of copy 
settings stored in job programs.
Disabling of Bypass-Tray in 
Duplex Copy
This is used to prohibit the use of the bypass tray when 
making two-sided copies.
The bypass tray is often used to feed label sheets, 
transparency film, and other special media for which 
two-sided copying is prohibited. If a sheet of one of these 
special media enters the reversing unit, a misfeed or...

7-71
SYSTEM SETTINGS
Contents
Color Adjustments
The following color settings can be configured.
Initial Color Balance Setting
Color balance values obtained using Color Balance in 
the special modes can be stored in a program (1 to 48), 
and those values can be retrieved and stored as the 
initial color balance setting*. Use this feature when you 
want to repeatedly use a color balance setting for a 
favorite color or for correction when a change occurs in 
the color balance.
* Preset values displayed...

7-72
SYSTEM SETTINGS
Contents
Network Settings
Network settings are described below. Touch the [Network Settings] key to configure the settings.
IPv4 Settings
When using the machine on a TCP/IP (IPv4) network, use 
this setting to configure the IP address of the machine.
The settings are shown below.
IP Address
Enter the IP address of the machine.
IP Subnet Mask
Entry the IP Subnet Mask.
IP Gateway
Enter the IP Gateway address.
DHCP
Use this setting to have the IP address obtained 
automatically using...

7-73
SYSTEM SETTINGS
Contents
Printer Settings
Settings related to the printer function can be configured. Touch the [Printer Settings] key to configure the settings.
Default Settings
Printer condition settings are described below.
Prohibit Notice Page Printing
This setting is used to disable printing of notice pages.
Prohibit Test Page Printing
This setting is used to disable printing of test pages. 
When this setting is enabled, Printer Test Page in the 
system settings cannot be used to print test...

7-74
SYSTEM SETTINGS
Contents
Interface Settings
These settings are used to control and monitor data transmitted to the USB port or network port of the machine.
Hexadecimal Dump Mode
This function is used to print the print data from a 
computer in hexadecimal format together with the 
corresponding ASCII text. This allows you to check 
whether or not print data from the computer is being 
transmitted to the machine correctly.
Example of a hexadecimal dump
I/O Timeout
The I/O timeout can be set to any...

7-75
SYSTEM SETTINGS
Contents
Auto Color Calibration
This is used to perform automatic color correction when the color in color printing is off. The machine prints a test patch, 
the test patch is scanned, and the color is automatically corrected.
After the [Execute] key is touched and a test patch is printed, a message appears prompting you to begin automatic 
calibration. Place the test patch on the document glass as shown below (so that the thin line at the edge of the page is to 
the left).
Lay copy...

7-76
SYSTEM SETTINGS
Contents
Image Send Settings
Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] 
key to configure the settings.
Operation Settings
The operation settings below apply to all image send functions.
Default Display Settings
You can select one of 5 base screen types for the base screen 
that appears when the [IMAGE SEND] key is touched or when 
the [CLEAR ALL] ( ) key is pressed in image send mode.
 Address Book
 Scan...

7-77
SYSTEM SETTINGS
Contents
Must Input Next Address Key at 
Broadcast Setting
This setting is used to require that the [Next Address] 
key be touched before the next address is entered when 
performing a broadcast transmission.
When this setting is enabled, the [Next Address] key 
cannot be omitted even if the next address is entered 
with a one-touch key.
If a user attempts to enter the next address without 
touching the [Next Address] key, a double-beep alarm 
will sound and the entry will be...

7-78
SYSTEM SETTINGS
Contents
Disable Registration of Program
This prohibits the use of the address book when a 
program is stored.
Configure the setting for each of the following items:

 FTP

 Network Folder
 Internet Fax (Including Direct SMTP)

Select All: Select all items.
Clear Checked: Clear all selections.
Disable Registration of Memory 
Box
Disable all types of memory box registration.
Configure the setting for each of the following items:
Polling Memory, Confidential, Relay Broadcast (Direct...