Sharp Mx 4100n Owners Manual

7-59
SYSTEM SETTINGS
Contents
Energy Save
The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce 
pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings.
Toner Save Mode
You can reduce the amount of toner used for printing.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off. 
Remove the checkmark if you prefer that Auto Power 
Shut-Off does not operate.
When the set duration of...

7-60
SYSTEM SETTINGS
Contents
Operation Settings
Settings related to machine operation can be configured. Touch the [Operation Settings] key to configure the settings.
Other Settings
Keys Touch Sound
This setting is used to adjust (or turn off) the volume of the 
beep that sounds when you touch a key. You can also have 
three beeps sound at initial values when setting the ratio in 
copy mode or when adjusting the exposure in any mode.
Auto Clear Setting
The time until Auto Clear activates can be set to...

7-61
SYSTEM SETTINGS
Contents
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and 
time.
Disabling of Covers/Inserts Mode
This setting is used to prohibit the use of the covers and 
inserts function.
Initial Original Count Setting
This specifies whether or not Original Count in the 
special functions is enabled for each function.
Copy
 Copy
Image Send
 Scan
 Internet Fax
 Fax Job
 Data Entry
Document Filing
 Scan to HDD 

7-62
SYSTEM SETTINGS
Contents
MFP Display Pattern Setting
One of six color patterns can be selected for the color pattern in the touch panel.
A sample of the selected pattern can be viewed.
Customize Key Setting
Short-cuts to functions that are frequently used can be displayed in the base screen of each mode.
For information on customize keys, see the chapters for each function.
The settings are shown below.
Home Screen Settings
Use this to configure the home screen that appears when the [HOME] key is...

7-63
SYSTEM SETTINGS
Contents
Preview Setting
Configure settings for the preview screen that can be 
used for fax / image send and document filing.
Default Preview
Set the selection state of the [Preview] key in each of the 
screens below.
Copy
Image Send
 Scan Send
 Internet Fax Send
 Fax Send
 Data Entry
 USB Memory Scan
 Address Book
Document Filing
 Scan to HDD
Default Preview Display
Set the display zoom ratio of the preview screen for 
copy, fax / image send, and document filing.
Received Data...

7-64
SYSTEM SETTINGS
Contents
Device Control
These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings.
Other Settings
Original Feeding Mode
The following original feeding modes can be set to 
operate by default in copy, Scan to HDD, and image 
send modes. When a mode is frequently used, this 
saves you from having to select the mode in the special 
modes each time you need to use it.
 Mixed Size Original (Same Width (Copy mode 
only)/Different...

7-65
SYSTEM SETTINGS
Contents
Detect Standard in Auto Color 
Mode
When the color mode is set to auto in copy mode, the 
discrimination point for detecting whether originals are 
color or black and white can be set to one of 5 levels. To 
make it easier to detect a black and white original, adjust 
the setting toward [Black & White]. To make it easier to 
detect a color original, adjust the setting toward [Color].
Auto Switching of Finisher Trays
(When a finisher (large stacker) is installed.)
If the...

7-66
SYSTEM SETTINGS
Contents
Original Size Detector Setting
One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection 
function.
Cancel Detection at Document Glass
Original size detection on the document glass can be disabled. When this is done, all originals placed on the document 
glass are treated as special size originals.
Selections
Detectable original sizes
Document glassDocument feeder tray (automatic 
document feeder)
Inch-111 x 17,...

7-67
SYSTEM SETTINGS
Contents
Disabling of Devices
Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic 
document feeder, such as when the feeder malfunctions. 
(When the setting is enabled, scanning is still possible 
using the document glass.)
Disabling of Duplex
This is used to disable two-sided printing, such as when 
the duplex module malfunctions....

7-68
SYSTEM SETTINGS
Contents
Copy Function Settings
The following settings are related to copying. Touch the [Copy Function Settings] key to configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).
Initial Status Settings
The copier settings are reset when the [POWER] key ( ) is turned on, when the [CLEAR ALL] key ( ) is pressed, or 
when the auto clear interval has elapsed. These settings are used to change the default...