Sharp Mx 3501 N Manual

65
MAKING COPIES IN PAMPHLET FORMAT 
(Pamphlet Copy)
This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of 
paper so that the copies can be folded at the centerline to form a pamphlet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
Pamphlet copy using 8 original pages
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
If the originals...

66
3
Touch the [Pamphlet Copy] key.
4
Specify whether the original is a 1-sided 
or 2-sided original.
5
Select the binding edge ([Left Binding] 
or [Right Binding]).
6
Specify whether or not a cover will be 
added.
If a different type of paper will be used for the cover, touch the 
[Cover Setting] key.
If a cover will not be added, go to step 10.
7
If the cover sheet will be copied on, 
touch the [Yes] key. Otherwise, touch 
the [No] key.
Special ModesOK
1/4Margin Shift
Pamphlet Copy
Erase
Tandem
Copy...

67
8
Select the paper tray for the cover.
(A) The currently selected paper tray for the cover is displayed.
(B) The size and type of paper in the currently selected tray is 
displayed.
In the example screen, 8-1/2 x 11 (A4) size plain paper is 
loaded in the bypass tray.
To change the paper tray for the cover, touch the tray selection 
key. (In the screen example, the Bypass Tray display is the 
tray selection key.)
The tray selection screen appears when the tray selection key 
is touched. Select the...

68
11
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Copying will begin.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each page one 
page at a time. If you are using the sort function or other 
function that requires all originals to be scanned before the 
copies are printed, you must use the same [START] key that 
you used to scan the first original to scan each of the 
remaining originals.
To...

69
COPYING A LARGE NUMBER OF 
ORIGINALS AT ONCE (Job Build)
When copying a very large number of originals, this function allows you to divide the originals into sets and feed each 
set through the automatic document feeder one set at a time.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the 
maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into multiple sets...

70
4
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
( ) to scan the first set of originals.
Scanning begins.
To cancel scanning...
Press the [STOP] key ( ).
5
Insert the next set of originals and press 
the [COLOR START] key ( ) or the 
[BLACK & WHITE START] key ( ).
You must use the same [START] key that you used to scan the 
first set of originals to scan each of the remaining sets.
Repeat this step until all originals have been scanned.
To cancel scanning...
Press the [STOP] key (...

71
USING TWO MACHINES TO COPY A LARGE 
NUMBER OF ORIGINALS (Tandem Copy)
Two machines connected to the same network can be used to run a large copy job in parallel.
Each machine prints half of the copies, reducing the time required to complete the job.
Master machine and slave machine
In the following explanation, the master machine is the machine that is used to scan the originals. The slave machine is 
another machine specified in the master machine that only helps print the copies; it is not used to...

72
3
Select tandem copy.
(1) Touch the [Tandem Copy] key so that it is 
highlighted.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
4
Set the number of copies with the 
numeric keys.
Up to 999 can be set. When the [COLOR START] key 
( ) or the [BLACK & WHITE START] key ( ) is 
pressed, the copies will automatically be divided between the 
master and slave machines.
If an odd number of copies is set, the master machine will print 
the extra set.
If an incorrect number of copies...

73
In this situation...
A saddle stitch finisher is installed on the master machine but not on the slave machine.
 Copying without stapling: tandem copy is possible.
 Copying with stapling: tandem copy is not possible.
In this way, if tandem copying is executed using a function that the slave machine does not have, a message will appear. To 
have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key.
If a machine runs out of paper
If either the master machine...

74
USING A DIFFERENT PAPER TYPE FOR 
COVERS (Covers/Inserts)
A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the 
automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified 
pages.
Example of adding covers
Example of adding covers/insertsExample of adding inserts
About the explanations of covers and 
inserts
There are various ways of using covers and inserts. To 
keep the...