Sharp Mx 3501 N Manual

25
4
Adjust the exposure level.
Touch the   key to make the copy darker.
Touch the   key to make the copy lighter.
Using a copy or printed page as an original
When using a copy or printed page from the machine as an 
original, touch the [Copy of Copy] checkbox so that a 
checkmark  appears.
When [Copy of Copy] is selected, only [Text], [Printed Photo], 
or [Text/Prtd.Photo] can be selected for the exposure mode.
To enhance the color of a color copy...
Touch the [Color Tone Enhancement] checkbox so that...

26
REDUCTION/ENLARGEMENT/ZOOM
AUTOMATIC RATIO SELECTION (Auto Image)
This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match 
the paper size.
The reduction or enlargement ratio is selected automatically based on the original size and the selected paper size.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
Automatic ratio selection cannot be used if the original size or...

27
MANUALLY SELECTING THE RATIO (Preset 
ratios/Zoom)
The enlargement and reduction keys can be used to select five preset ratios each (from a maximum of 400% to a 
minimum of 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
5
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you placed the original on the document glass,...

28
3
Touch the [Menu] key to select copy 
ratio menu   or  .
●Menu 
 Enlargement keys (2 ratios): 121%, 129%
 Reduction keys (2 ratios): 64%, 77%
 Full size key: 100%
●Menu 
 Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
 Reduction keys (2 to 4 ratios)
25%, 50%, any ratio (max. of two)
 Full size key
100%
Keys marked (A)
The keys marked (A) can be set to show any ratio using Add or Change Extra Preset Ratios in the system settings 
(administrator).
4
Touch a preset ratio key...

29
6
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you placed the original on the document glass, scan each 
page one page at a time. If you are using the sort function or 
other function that requires all originals to be scanned before 
the copies are printed, you must use the same [START] key 
that you used to scan the first original to scan each of the 
remaining...

30
ENLARGING/REDUCING THE LENGTH AND WIDTH 
SEPARATELY (XY Zoom)
The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately.
Both the horizontal and vertical ratios can be set from 25% to 400% in increments of 1%.
When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Copy Ratio] key.
3
Touch the [XY Zoom] key....

31
5
Touch one of the preset ratio keys (A) 
and the zoom keys (B) to set the 
horizontal (X) ratio.
(A) A preset ratio key will not become highlighted when 
touched.
(B) The zoom keys can be touched to set the ratio from 25% to 
400% in increments of 1%.
To quickly select a ratio, touch a preset ratio key (A) to select a ratio close to the desired ratio and then use the zoom 
keys (B) for fine adjustment.
6
Touch the [Y] key.
7
Touch one of the preset ratio keys (A) 
and the zoom keys (B) to set the...

32
10
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you placed the original on the document glass, scan each 
page one page at a time. If you are using the sort function or 
other function that requires all originals to be scanned before 
the copies are printed, you must use the same [START] key 
that you used to scan the first original to scan each of the 
remaining...

33
ORIGINAL SIZES
CHECKING THE ORIGINAL SIZE
When the original is placed, the original size is automatically detected and displayed in the base screen. If [Auto] 
appears in the [Original] key that is displayed when the [Job Detail Settings] key is touched, the size of the placed 
original is automatically detected. (Automatic original detection function)
Example of base screen
The original size is displayed. An icon shows the 
orientation of the original.
If the original size is not a standard size, it...

34
Standard original placement orientations
Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are 
oriented as shown below. If originals are placed in the wrong orientation, staples will be incorrectly positioned and some 
special features may not give the expected result. For more information on placing the original, see 3. ORIGINAL in 
the Users Guide.
[Example 1]
[Example 2]
Automatic copy image rotation (Rotation Copy)
If the orientation...