Sharp Mx 3501 N Manual

15
AUTOMATIC 2-SIDED COPYING
USING THE AUTOMATIC DOCUMENT FEEDER TO 
MAKE 2-SIDED COPIES
The following 2-sided copying can be performed automatically. The originals and paper are turned over automatically, 
allowing easy 2-sided copying.
Automatic 2-sided copying of 1-sided 
originalsAutomatic 2-sided copying of 2-sided 
originals1-sided copying of 2-sided originals
1
Place the originals face up in the document 
feeder tray with the edges aligned evenly.
Place the originals face up. Insert the originals...

16
4
Touch the [OK] key.
5
Make sure that the automatically 
selected paper size is the same size as 
the original.
The selected tray is highlighted. You can also copy onto paper 
that is a different size than the original.
 The 2-sided copy setting appears at the top of the paper size display (A).
 Depending on the size of the placed original, there may be cases where the same size of paper as the original is not 
selected automatically. In this event, change the paper size manually.
 To change the...

17
Using the [Binding Change] key
7
Set the number of copies (sets) with the 
numeric keys.
 Up to 999 can be set.
 If you are only making a single copy, the copy can be made with the copy number display showing 0.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
OriginalsBinding Change is usedBinding...

18
AUTOMATIC 2-SIDED COPYING USING THE 
DOCUMENT GLASS
The following 2-sided copying can be performed automatically. The paper is turned over automatically, allowing easy 
2-sided copying.
Automatic 2-sided copying of 1-sided 
originals
1
Open the automatic document feeder, 
place the original face down on the 
document glass, and then gently close 
the automatic document feeder.
 Align the corner of the original with the tip of the arrow mark 
 on the document glass scale.
 Place the original in the...

19
3
Touch the [1-Sided to 2-Sided] key.
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
4
Touch the [OK] key.
5
Make sure that the automatically 
selected paper size is the same size as 
the original.
The selected tray is highlighted. You can also copy onto paper 
that is a different size than the original.
 The 1-Sided to 2-Sided copy setting appears at the top of the paper size display (A).
 Depending on the size of the placed original,...

20
7
Set the number of copies (sets) with the 
numeric keys.
 Up to 999 can be set.
 A single copy can be made even if 0 appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
8
Press the [COLOR START] key ( ) 
or the [BLACK & WHITE START] key 
().
Scanning begins.
If you are using the sort function or other function that requires 
all originals to be scanned before the copies are printed, you 
must use the same [START]...

21
COPY COLOR MODES
This section explains how to select the color mode.
For a color original, set the color mode to Full Color.
If color originals and black and white originals are mixed together, set the color mode to Auto.
SELECTING THE COLOR MODE
Full ColorThe original is copied in full color.
Single Color
The original is copied in the selected color only.
All colors in the original are changed to the selected color, which can be selected from red, 
green, blue, cyan, magenta, or yellow.
2 Color
Only...

22
Selecting single color copying
When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the 
[OK] key.
Selecting 2 color copying
When [2 Color] is selected for the color mode, the following screen appears. Touch the desired colors and touch the 
[OK] key.
4
Press the [COLOR START] key ( ).
Scanning begins.
 If the originals were placed in the document feeder tray, the 
originals are copied.
 If you are using the document glass, copy each...

23
CHANGING THE EXPOSURE AND 
EXPOSURE MODE
The exposure level and exposure mode can be selected to obtain a clear copy.
AUTOMATIC ADJUSTMENT OF THE EXPOSURE AND 
EXPOSURE MODE
Automatic exposure adjustment operates by default to automatically adjust the exposure level and mode as appropriate 
for the original being copied. (Auto is displayed.)
When a black and white or full color copy is made, the exposure is automatically adjusted to obtain the best image 
quality.
SELECTING THE EXPOSURE MODE AND...

24
3
Select the exposure mode.
Touch the appropriate original type key to select the exposure 
mode. 
●Selecting the exposure mode
If [Auto] is selected but the darkness or lightness of the image does not seem quite right...
If the image seems too light or too dark when [Auto] is selected, the exposure level can be adjusted using Copy 
Exposure Adjustment in the system settings (administrator).
ExposureOK
1/2
Manual
Auto
Printed 
Photo
Text/
Prtd.PhotoText/Photo
Text
Photo
ExposureOK
2/2
Manual
Light...