Sharp Ar-m 351 Manual

CUSTOM SETTINGS
2-13
2
5Touch the [DATE FORMAT] key.
The following screen appears.
6If you wish to change the format of the date
and time, touch the desired format keys.
Touched keys are highlighted.
The selected format is applied to lists printed out in
LIST PRINT.
7Touch the [OK] key.
You will return  to the
date and time setting
screen.
8Touch the [OK] key.
9To exit the settings, touch the [EXIT] key.
CUSTOM SETTINGSDATE FORMAT
YYYY/MM/DD
MM/DD/YYYY
DAY-NAME
POSITION
OK
FIRST12-HOUR
24-HOURLAST...

CUSTOM SETTINGS
2-14
About the settings

 Total count
This displays the following sheet counts (the
counts that can be displayed vary depending on
the options installed):
(1) Number of pages output by the machine.
(2) Number of original pages transmitted by the
machine.
(3) Number of times the automatic document
feeder was used to feed original pages and
number of times the stapler was used (if
installed).
(4) Number of pages stored by document filing.
In the case of (1) only,
A3 (11 x 17) size...

2-15
2
REPLACING THE TONER CARTRIDGE
When toner runs low, a message will appear to inform you that the toner cartridge must be replaced.
Follow the steps below to replace the toner cartridge.
1Open the front cover.
2Lower the cartridge lock lever.
3While depressing the lock release button,
pull out the toner cartridge and remove it.
4Remove a new toner cartridge from the
package and shake it horizontally five or
six times.
5Insert a new toner cartridge.
Push the cartridge in
until it locks securely into...

2-16
STORAGE OF SUPPLIES
Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges
for the finisher.

 Proper storage
1. Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of
the wrapper may curl or become damp, resulting
in paper misfeeds.
4. Store a new toner cartridge box...

2-17
2 MISFEED REMOVAL
When a misfeed has occurred during printing, the message A MISFEED HAS OCCURRED. will appear in the touch
panel display of the operation panel and printing including copying and facsimile output will stop. The approximate
misfeed locations are indicated with  shown in the illustration below. The page numbers for detailed information
on misfeed removal are also shown.
Misfeed removal guidance
Misfeed removal guidance can be displayed by touching the [INFORMATION] key on the touch...

MISFEED REMOVAL
2-18
Misfeed in the transport area, fusing area, and exit area
1Unlatch the duplex module and slide it to
the left.
Unlatch the module and
gently move the module
away from the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.
2Remove the misfed paper as shown in the
illustrations below. 
If paper is misfed in the
transport area, turn roller
rotating knob A in the
direction of the arrow to
remove the misfed
paper.
oIf paper is misfed in the
fusing...

MISFEED REMOVAL
2-19
2
Misfeed in the duplex module
1Unlatch the duplex module and slide it to
the left.
Unlatch the unit and
gently move the module
away from the machine.
2If the duplex module has an exit tray,
rotate it up out of the way and open the
cover of the duplex module.
If no exit tray is attached,
just open the cover of
the duplex module and
ignore any reference to
the tray in the following
steps.
3While holding the exit tray up, remove the
misfed paper as shown in the illustrations
below.
If...

MISFEED REMOVAL
2-20
Misfeed in the paper feed area

 Misfeed in paper tray 1
1Unlatch the duplex module and slide it to
the left.
Unlatch the module and
gently move the module
away from the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.
2Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
3If misfed paper is not found in step 2, pull
out paper tray 1 and remove the misfed
paper.
Be careful not to tear the
misfed paper during...

MISFEED REMOVAL
2-21
2

 Misfeed in the multi purpose drawer
1Unlatch the duplex module and slide it to
the left.
Unlatch the module and
gently move the module
away from the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.
2Open the left cover of the stand/paper
drawer.
Hold the knob and gently
open the cover.
If the machine is not
equipped with a stand/
paper drawer, open the
left cover of the multi
purpose drawer.
3Remove the misfed paper.
Be careful not...

2-22
REMOVING AN ORIGINAL MISFEED
Removing a misfed original from the automatic document feeder
If an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original.
Check locations A and B in the diagram at left to
remove the original.
1Removing misfeeds from each location.

 Check location A
Open the document
feeding area cover and
gently remove the misfed
original without tearing it.
Close the cover securely
so that cover clicks into
place.

...