Sharp Ar-m 351 Manual

1-1
CHAPTER 1
BEFORE USING THE 
PRODUCT
This chapter contains basic information that should be read before using
the product.
Page
INTRODUCTION .................................................................................... 1-2
MAIN FEATURES ................................................................................... 1-3
PART NAMES AND FUNCTIONS .......................................................... 1-9
Exterior...

1-2
INTRODUCTION
Thank you for purchasing a SHARP digital multifunction copier.
Please read this manual before using the machine. In particular, be sure to read INSTALLATION REQUIREMENTS
before using the machine.
Please keep this manual close at hand for reference whenever necessary.
This manual provides general information on using the machine, such as routine maintenance and how to load paper
and remove misfeeds. It also explains how to use the copier and document filing functions.
Separate manuals...

1-3
1 MAIN FEATURES
The digital multifunction copier is capable of performing a variety of functions. This page shows features related to
the copy function.
Sort mode   See page 1-3
Group mode   See page 1-3
2-sided Copy   See page 1-3
(When the duplex module is installed.)
Exposure Adjustments   See page 1-3
Reduction/Enlargement   See page 1-4
XY Zoom   See page 1-4
Margin Shift   See page 1-4
Erase   See page 1-4
Dual Page Copy   See page 1-4
Pamphlet Copy   See page 1-4
Job Build   See...

MAIN FEATURES
1-4
Reduction / Enlargement See page 4-15
Copies can be enlarged or reduced to the desired
size.
XY Zoom See page 4-18
Separate ratio settings can be selected for the
length and width of a copy.
Margin Shift See page 5-3
Margins can be added to copies.
Erase See page 5-4
Shadows that appear around the edges of copies of
books or thick originals can be erased. 
Dual Page Copy See page 5-5
The left and right pages of a book can be
successively copied onto separate sheets.
Pamphlet Copy See...

MAIN FEATURES
1-5
1
Job Build See page 5-8
When you have a very large number of originals, the
pages can be scanned in sets.
Tandem Copy See page 5-9
Two machines can be used to run a large copy job
in parallel.
Covers/inserts See page 5-11
Front covers, back covers, and inserts can be
added. These can also be copied on.
Transparency Insert See page 5-22
Inserts can be automatically inserted between
transparencies.
Multi Shot See page 5-23
Multiple original pages can be copied onto a
single sheet of...

MAIN FEATURES
1-6
Card Shot See page 5-26
The front and back of a card can be copied onto
one sheet of paper.
This function is convenient for making copies for
certification purposes and helps save paper.
Job programs See page 5-41
Various steps of a copy operation can be stored
as a program, and up to 10 programs can be
stored. Saving frequently used sets of settings in
a program saves you the trouble of selecting
those settings each time you wish to use them. 
Mirror Image See page 5-28
A mirror image...

MAIN FEATURES
1-7
1
Page numbering See page 5-34
Page numbers can be added to copies.
Text See page 5-38
Entered text can be added to copies.
Interrupting a copy run See page 5-43
A copy job in progress can be interrupted for a
rush job.
Offset mode See page 3-8
Each set of output can be offset slightly from other
sets for easy separation.
Staple sort mode See page 3-8, 3-16
Sets of copies can be automatically stapled.
Saddle stitch See page 3-14
When a saddle stitch finisher is installed, copies
can be...

MAIN FEATURES
1-8
Hole punching See page 3-17
Copies can be punched to add holes.Document filing function See CHAPTER 7
A document image can be stored on the hard disk.
A stored file can easily be called up and printed or
transmitted.
Energy saving features
This product has the following two power reducing modes to help conserve natural resources and reduce
environmental pollution.
Preheat mode
When the machine remains in the standby state for the amount of time set in the key operator programs, preheat...

1-9
1 PART NAMES AND FUNCTIONS
Exterior
(1) Bypass tray*
(2) Exit tray*
(3) Automatic document feeder (See page 4-2.)
This automatically feeds and scans multiple sheet
originals. Both sides of two-sided originals can be
scanned at once.
(4) Duplex module*
Module for two-sided printing
(5) Upper paper output area  (Centre tray)
Finished sheets are deposited here.
(6) Upper exit tray extension*
Provides support for large size paper.(7) Operation panel
(8) Front cover
Open to add toner.
(9) Power switch...

PART NAMES AND FUNCTIONS
1-10
Interior
(14) Duplex module side cover
Open when a misfeed has occurred in the duplex
module.
(
15) Side cover latch
Push up to open the side cover when a misfeed
has occurred in the main unit.
(
16) Fusing unit
Lift up to open the side cover when a misfeed has
occurred in the main unit.(
17) Toner cartridge (drum/toner cartridge)
The toner cartridge must be replaced when
indicated on the operation panel. (See page 2-15)
(
18) Photoconductive drum
Images are formed on the...