Sharp Ar-m 351 Manual

LOADING PAPER
2-3
2
Specifications of paper trays
The specifications for types and sizes of paper that can be used in each tray are shown below.
TrayTray No.
(tray name)
Applicable paper typesApplicable paper sizesPaper
weight
Paper tray 1 Tray 1 Plain paper (Refer to the next page
for applicable plain papers.)
A4, B5, 8-1/2 x 1160 to 105 g/m2
or 16 to 28 lbs.
Multi purpose
drawer
/bypass trayTray 2
/bypass
trayPlain paper (Refer to the next page
for applicable plain papers.)If AUTO-AB is selected in...

LOADING PAPER
2-4

 Applicable plain paper
For satisfactory results, plain paper must conform to the following requirements.

 Applicable special paper
For satisfactory results, special paper must conform to the following requirements.

 Paper that can be used for automatic two-sided printing
Paper used for automatic two-sided printing (paper that can be fed through the duplex module) must meet the
following conditions:
Paper type :Plain paper as specified above.
Paper size :Must be one of...

LOADING PAPER
2-5
2
Setting the paper type and paper size
Follow these steps to change the paper type setting if the paper type is changed in either paper tray. For the paper
types that can be used in each tray, see page 2-3.
1Press the [CUSTOM SETTINGS] key.
The custom setting
menu screen will
appear.
2Touch the [PAPER TRAY SETTINGS] key.
The paper tray selection
screen will appear.
3Touch the [TRAY SETTINGS] key.
4Display the setting screen of the desired
paper tray.
Touch the   key or   key to display...

LOADING PAPER
2-6
7Select the size of paper that was loaded in
the tray.
Touch the appropriate keys (checkboxes).
8Touch the [OK] key in the size setting
screen.
You will return to the tray setting screen of step 4.
9Select output functions that can be used
with the selected tray.
Touch the checkboxes
under the desired items
to select them.
Checkboxes that can be
selected will vary
depending on the options
that are installed.
10Configure paper settings for each tray and
then touch the [OK] key to exit....

LOADING PAPER
2-7
2
Programming and editing paper types
To program or edit the name of a paper type or set paper attributes, follow the steps below.
1Follow steps 1 and 2 of Setting the paper
type and paper size (page 2-5)
2Touch the [PAPER TYPE REGISTRATION]
key.
3Select the paper type that you wish to
program or edit.
4Touch the [TYPE NAME] key.
A character entry screen
appears.
Enter a type name
(maximum of 14
characters). (See page
7-26 to enter characters.)
5Set the attributes of the paper tray....

LOADING PAPER
2-8
Loading paper in the multi purpose drawer
The method of loading paper into the multipurpose drawer is the same as for paper tray 1 described on page 2-2.
For specifications of paper, see page 2-3. When loading envelopes, postcards or transparency film, follow the
descriptions below.
Two maximum height lines are indicated: one for plain paper and one for special paper.

 How to change the paper size
To change the paper size or paper type when paper is loaded into the multi purpose...

LOADING PAPER
2-9
2
Printing onto envelopes
Do not use envelopes that have metal clasps, plastic snaps, string closures, windows, linings, self-adhesive
patches or synthetic materials. Attempting to print on these may cause misfeeds, inadequate toner adherence or
other trouble.
Creases or smudging may occur. This is especially true of embossed surfaces and other irregular surfaces.
Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be
sealed closed...

LOADING PAPER
2-10




 
Loading transparency film
Be sure to load the transparency film with the white label side up. Make sure no image will be printed on the label.
Printing on the label may cause smudges on prints. Transparency film must be set in the portrait orientation.
Specifications (multi purpose drawer)
Specifications are subject to change for improvement without notice.
Loading paper in the stand/3 x 500 sheet paper drawer
Upper paper tray:
The upper tray is the same as the multi-purpose...

LOADING PAPER
2-11
2
Loading paper in the stand/MPD & 2000 sheet paper drawer
Upper paper tray:
The upper paper tray is equivalent to the multi purpose drawer. The method of loading paper and the paper that can
be used are the same as for the multi purpose drawer. Refer to the description of the multi purpose drawer (see page
2-8).
Lower paper tray:
The lower paper tray is a large capacity tray that holds 2,000 sheets of A4 or 8-1/2 x 11 paper (80 g/m2 (20 lbs.)).
Use the following procedure to load...

2-12
CUSTOM SETTINGS
The items that can be set with the custom settings are shown below.
Total count . . . . . . . . . . . . . . . . . . The number of pages processed  by the machine and optional equipment
can be displayed. (See page 2-14)
Default settings  . . . . . . . . . . . . . . Used  to  configure  the  screen  contrast,  date  and  time,  and  keyboard
selection*
1 settings. (See page 2-14)
List print . . . . . . . . . . . . . . . . . . . . Used to print lists of settings and fonts. (See page...