Sharp Ar-m 351 Manual

NORMAL COPYING
4-11
4
Copying from the document glass
When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the
document cover and copy the originals from the document glass.

 1-sided copies of 1-sided originals
1Place the original on the document glass.
(pages 4-3 to 4-6)
Align the corner of the original with the tip of the
arrow mark   on the document glass scale.
Place the original in the appropriate position for its
size as shown above....

NORMAL COPYING
4-12
4Select the desired output mode. (page 4-
9.)
Group mode is the
default mode.
To select sort mode,
touch the [OUTPUT]
key, touch the [SORT]
key in the screen that
appears, and then touch
the [OK] key.
5Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing 0.
Use the [C] (clear) key to
cancel an entry if a mistake has been made.
6If needed, touch the [FILE] key or...

NORMAL COPYING
4-13
4
Automatic two-sided copying from the document glass
When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
1Place the original on the document glass.
(pages 4-3 to 4-6)
Align the corner of the original with the tip of the
arrow mark   on the document glass scale.
Place the original in the appropriate position for its
size as...

4-14
ADJUSTING THE EXPOSURE
Select an appropriate exposure mode for the original to be copied. The selections are AUTO, TEXT, TEXT/PHOTO
and PHOTO.

 Automatic exposure adjustment
The default exposure
setting is AUTO, which
automatically adjusts
the exposure for the
original. To select the
exposure mode, or to
manually adjust the
exposure  level, follow the steps below.

 Selecting the exposure mode and manually adjusting the exposure level
1Touch the [EXPOSURE] key.
2Select [TEXT], [TEXT/PHOTO]...

4-15
4
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected automatically or manually.
Automatic selection: Auto image (see below)
Manual selection: Preset copy ratios/zoom (see page 4-16)
Automatic selection (auto image)
The reduction or enlargement ratio will be selected automatically based on the original size and the selected paper size.
1Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
The detected original size will be displayed....

REDUCTION/ENLARGEMENT/ZOOM
4-16
Manual selection (preset copy ratios/zoom)
Preset ratios (maximum 400%, minimum 25%) can be selected with the enlargement and reduction keys. In addition,
the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

1Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
2Touch the [COPY RATIO] key.
3Use the [MENU] key to select menu   or
menu   for copy ratio selection.
Menu 
A.Preset reduction copy ratios...

REDUCTION/ENLARGEMENT/ZOOM
4-17
4
6Make sure that an appropriate paper size
has been selected based on the selected
ratio.
Auto paper select display
7Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing 0.
Use the [C] (clear) key to
cancel an entry if a mistake has been made.
8If needed, touch the [FILE] key or the
[QUICK FILE] key.
Either key can be
touched to store the
scanned...

REDUCTION/ENLARGEMENT/ZOOM
4-18
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can set
from 25% to 400% in increments of 1%.
Example: Selecting 100% for the length and 50% for the width
1Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
2Touch the [COPY RATIO] key.
3Touch the [XY ZOOM] key.
4Touch the [X] key.
The initial state of the [X]
key is selected
(highlighted), so this
step normally is not...

REDUCTION/ENLARGEMENT/ZOOM
4-19
4
7Use the reduction, enlargement, and
ZOOM ([ ], [ ]) keys to change the
copy ratio in the vertical (Y) direction.
A fixed ratio key will not
become highlighted
when touched.
The zoom keys can be
used to change the ratio
from 25% to 400% in
increments of 1%.
If needed, you can touch
the [X] key once again to
readjust the X zoom.
8Touch the [OK] key.
9If needed, touch the [PAPER SELECT] key
and select the paper size.
If the AUTO PAPER
SELECT mode is on, the
appropriate...

4-20
SPECIAL PAPERS
The tray 2 and the bypass tray on the optional duplex module with bypass tray can be used to make copies on
transparencies, postcards, label sheets, envelopes*
1, and plain paper.
*1 Envelopes can be placed in the tray 2.
1Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
2Load the special paper in the bypass tray.
Place the paper with the
printed side face down.
See page 2-3 for the
specifications of paper
that can be used in the
bypass...