Sharp Ar-m 351 Manual
Here you can view all the pages of manual Sharp Ar-m 351 Manual. The Sharp manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 141
5-41 5 STORING, USING AND DELETING JOB PROGRAMS The steps of up to 10 copy jobs can be stored as job programs. Job programs can be called up with ease, and are retained even when the power is turned off. By storing frequently used copy settings in a job program, you can eliminate the bother of selecting the settings each time you use them for a copy job. If any settings related to the steps of a job program are changed in the key operator programs after the job program is stored, the steps related to...
Page 142
![Page 142
STORING, USING AND DELETING JOB PROGRAMS
5-42
Calling up a job program
1Press the [#/P] key.
2Touch the number key of the desired job
program.
The screen
automatically closes and
the job program is called
up. A number key that
does not have a job
program cannot be
selected.
3Set the number of copies if needed and
then press the [START] key.
Copying will begin using
the settings of the job
program.
Deleting a stored job program
1Press the [#/P] key.
2Touch the [STORE/DELETE] key.
3Select a storage...](http://img.usermanuals.tech/thumb/68/103027/w300_d_1512397581-sharp-ar-m-351-manual_d-141.png "Page 142
STORING, USING AND DELETING JOB PROGRAMS
5-42
Calling up a job program
1Press the [#/P] key.
2Touch the number key of the desired job
program.
The screen
automatically closes and
the job program is called
up. A number key that
does not have a job
program cannot be
selected.
3Set the number of copies if needed and
then press the [START] key.
Copying will begin using
the settings of the job
program.
Deleting a stored job program
1Press the [#/P] key.
2Touch the [STORE/DELETE] key.
3Select a storage...")
STORING, USING AND DELETING JOB PROGRAMS 5-42 Calling up a job program 1Press the [#/P] key. 2Touch the number key of the desired job program. The screen automatically closes and the job program is called up. A number key that does not have a job program cannot be selected. 3Set the number of copies if needed and then press the [START] key. Copying will begin using the settings of the job program. Deleting a stored job program 1Press the [#/P] key. 2Touch the [STORE/DELETE] key. 3Select a storage...
Page 143
![Page 143
5-43
5 INTERRUPTING A COPY RUN
The copy of the original scanned in interrupt mode is output before the remainder of the interrupted copy job.
1Touch the [INTERRUPT] key.
If interrupt copying is
possible during a copy
run, the [INTERRUPT]
key will appear. (If the
key does not appear,
interrupt copying is not
possible.)
When the [INTERRUPT]
key is touched in step 1,
the [INTERRUPT] key
will be replaced by the
[CANCEL] key as shown
in the illustration.
To cancel an interrupt
copy job while the interrupt...](http://img.usermanuals.tech/thumb/68/103027/w300_d_1512397581-sharp-ar-m-351-manual_d-142.png "Page 143
5-43
5 INTERRUPTING A COPY RUN
The copy of the original scanned in interrupt mode is output before the remainder of the interrupted copy job.
1Touch the [INTERRUPT] key.
If interrupt copying is
possible during a copy
run, the [INTERRUPT]
key will appear. (If the
key does not appear,
interrupt copying is not
possible.)
When the [INTERRUPT]
key is touched in step 1,
the [INTERRUPT] key
will be replaced by the
[CANCEL] key as shown
in the illustration.
To cancel an interrupt
copy job while the interrupt...")
5-43 5 INTERRUPTING A COPY RUN The copy of the original scanned in interrupt mode is output before the remainder of the interrupted copy job. 1Touch the [INTERRUPT] key. If interrupt copying is possible during a copy run, the [INTERRUPT] key will appear. (If the key does not appear, interrupt copying is not possible.) When the [INTERRUPT] key is touched in step 1, the [INTERRUPT] key will be replaced by the [CANCEL] key as shown in the illustration. To cancel an interrupt copy job while the interrupt...
Page 144
Copy_EX.book 44 ページ ２００４年９月２８日 火曜日 午後９時５４分
Page 145
6-1 CHAPTER 6 MACHINE MAINTENANCE (FOR COPYING) This chapter explains procedures for cleaning the machine, and troubleshooting. Page USER MAINTENANCE ........................................................................... 6-2 Cleaning the document glass and the automatic document feeder .......6-2 Cleaning the main charger of the photoconductive drum .......................6-2 TROUBLESHOOTING ............................................................................ 6-3 Copy_EX.book 1 ページ...
Page 146
6-2 USER MAINTENANCE Cleaning the document glass and the automatic document feeder If the document glass, document cover or automatic document scanning unit have dirty spots, these spots will form lines in scanned images. These will show up as defects when the images are printed. Always keep these parts clean. \Wipe with a clean, soft cloth. If necessary, moisten the cloth with water or a small amount of neutral detergent. When finished, wipe dry with a clean cloth. When cleaning, do not use thinner,...
Page 147
![Page 147
6-3
6 TROUBLESHOOTING
Check the following troubleshooting list before requesting service as many problems can be fixed by the user. If you
are unable to solve the problem by checking the list, turn off the power switch, and unplug the power cord.
Problems related to the copy function are described below. For problems related to general use of the machine, see
page 2-23.
Problem Check Solution
Machine does not
operate.Is the [START] key indicator off? This indicates that the machine is warming
up...](http://img.usermanuals.tech/thumb/68/103027/w300_d_1512397581-sharp-ar-m-351-manual_d-146.png "Page 147
6-3
6 TROUBLESHOOTING
Check the following troubleshooting list before requesting service as many problems can be fixed by the user. If you
are unable to solve the problem by checking the list, turn off the power switch, and unplug the power cord.
Problems related to the copy function are described below. For problems related to general use of the machine, see
page 2-23.
Problem Check Solution
Machine does not
operate.Is the [START] key indicator off? This indicates that the machine is warming
up...")
6-3 6 TROUBLESHOOTING Check the following troubleshooting list before requesting service as many problems can be fixed by the user. If you are unable to solve the problem by checking the list, turn off the power switch, and unplug the power cord. Problems related to the copy function are described below. For problems related to general use of the machine, see page 2-23. Problem Check Solution Machine does not operate.Is the [START] key indicator off? This indicates that the machine is warming up...
Page 148
Copy_EX.book 4 ページ ２００４年９月２８日 火曜日 午後９時５４分
Page 149
7-1 CHAPTER 7 DOCUMENT FILING FUNCTION Page OVERVIEW............................................................................................. 7-2 Document filing function .................................................................. 7-2 TO USE THE DOCUMENT FILING FUNCTION..................................... 7-4 A look at the operation panel .......................................................... 7-4 Saving files...
Page 150
7-2 OVERVIEW Document filing function The document filing function allows you to save a document image in the machines hard disk as a data file. The image can be called up and printed or transmitted as needed. The scanned document image is saved when printing or transmitting a document in copy mode, printer mode, or image send mode (QUICK FILE or FILE). A document can also be scanned and saved without being printed, copied, or transmitted (scan save). To allow you to search for the file and call it up,...