Sanyo Projector Plc Wxe45 User Manual

1
The	CE	Mark	is	a	Directive	
conformity	mark	of	the	European	
Community	(EC).
WARNING :
Hi�h volta�es are used to operate this projector. Do not attempt to open the cabinet.
If	problems	still	persist	after	following	all	operating	instructions,	contact	the	dealer	where	you	purchased	the	
projector	or	the	service	center.	Specify	the	model	number	and	explain	about	the	problem.	We	will	advise	you	
how	to	obtain	service.
This	symbol	on	the	nameplate	means	the	product	
is	Listed	by	Underwriters...


Menu Tree
Mode	1Mode	2SVGA	1 - - - -
Computer Input
Systems 	displayed 	in 	the 	System 	Menu 	vary	depending	on	an	input	signal.
Computer Input/Video Input
Sound
Volume
Mute
Quit
On	/	OffSound0	-	63
Input
Computer	2
VideoAuto
Go	to	System  (3)
Go	to	System (3)
Video	
Go	to	System (3)
Go	to	System (1)
Go	to	System (2)
S-video
RGB(	Scart	)		
Quit
Quit
System (1)
RGBComputer	1
Component
Auto	PC	adj.
Total	dotsHorizontalVertical
Display	area	HDisplay	area	VReset
Dynamic
RealBlackboard...


AutoPALSECAMNTSCNTSC	4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard	(Green)
Image	1Image	2Image	3
Settin�
Ima�e Select
System (2)
System (3)
Image	4
LanguageSettin�English
On	/	OffOff	/	Countdown	off	/	On	Logo	select
On	/	Off
On	/	Off
Off
On	/	Off
High	/	Auto	/	Normal
Code	1	/	Code	2
KeystoneBlue	backDisplayLogo
Ceiling
Rear
Power	management
On	start
Lamp	control
Remote	control
Quit
ReadyShut	down
Quit
Timer(1-30	Min)Quit
Fan
Standard
Store	/	Reset
Quit...

4
Indicators
Projector ConditionPOWERred/�reenWARNING	red
LAMP	REPLACEyellow
The	projector	is	off.	(The	 AC	power	cord	is	unplugged.)
The	projector 	is 	preparing 	for 	stand-by 	or 	the 	projection 	lamp 	is	
being	 cooled	 down.	The	projector	 cannot	be	turned	 on	until	 cooling	 is	
completed.
The	projector	 is	ready	 to	be	 turned	 on	with	 the	POWER	 ON/STAND-BY 	
button.
The	projector	is	operating	normally.
The	projector	is	in	the	Power	management	mode.
The	temperature	 inside	the	projector...

5
Compatible Computer Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock.
	When	selecting	these	modes,	Screen,	Auto	PC	adjustment	and	PC	adjustment	can	be	limited.
ON-SCREEN 
DISPLAY RESOLUTION H-Freq.
(kHz) V-Freq.
(Hz)
VGA1 640x480 31.4759.88
VGA2 720x400 31.4770.09
VGA3 640x400 31.4770.09
VGA4 640x480 37.8674.38
VGA5 640x480 37.8672.81
VGA6 640x480 37.5075.00
VGA7 640x480 43.26985.00
MAC...

66
Technical Specifications
Mechanical Information
Projector TypeMulti-media Projector
Dimensions (W x H x D) 12.59" x 5.73" x 11.85" (319.9 mm x 145.5 x 300.9 mm) (Not including protrusions)
Net Weight 7.5 lbs (3.4 kg)
Feet Adjustment 0˚ to 10.0˚
Panel Resolution
LCD Panel System0.59” TFT Active Matrix type, 3 panels
Panel Resolution 1,280 x 800 dots
Number of Pixels 3,072,000 (1,280 x 800 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High...

7
●		
The	specifications	are	subject	to	change	without	notice.
●		
LCD	panels	are	manufactured	to	the	highest	possible	standards.		Even	though	99.99%	of	the	pixels	are	
effective,	a	tiny	fraction	of	the	pixels	(0.01%	or	less)	may	be	ineffective	by	the	characteristics	of	the	LCD	
panels.
Optional Parts
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.
to	the	sales	dealer....

8
Appendix
This	projector 	is 	compliant 	with 	PJLink 	Standard 	Class 	1 	of 	JBMIA 	(Japan 	Business 	Machine 	and 	Information	
System	 Industries	 Association).	 This	projector	 supports	all	commands	 defined	by	PJLink	 Class	1	and	 is	verified	
conformance	with	PJLink	Standard	Class	1.
For	PJ	Link	password,	see	page	21	on	the	owner’s	manual	“Network	Set-up	and	Operation.”
Projector	Input
Auto
PJLink	Input
Video
S-video
VIDEO	2
VIDEO	3
VIDEO	1
Video
PJLink	is	a	registered	trademark	of	JBMIA...

9
Terminal : Mini DIN 8-PIN SERVICE PORT CONNECTOR
R	X	D
-----
-----
GND
RTS	/	CTS
GND
GND
Serial
1


4
5

7
8
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analo� RGB (Mini D-sub 15 pin)
512341096781514131112
Confi�urations of Terminals
Red	(R/Cr)	Input	/	Output
Ground	(Horiz.sync.)
Green	(G/Y)	Input	/	Output
-----
Blue	(B/Cb)	Input	/	Output
Ground	(Red)
Ground	(Green)
Ground	(Blue)
1
5

4


7
8
+5V	Power	/		-----
Horiz.	sync.	Input/Output...

70
PIN Code Number Memo
Put	the	label	below	(supplied)	to	a	prominent	place	of	the	
projector’s	body	while	it	is	locked	with	a	PIN	code.
While	the	projector	is	locked	with	the	PIN	code...
Write	down	the	PIN	code	number	in	the	column	below	and	keep	it	with	this	manual	securely.	If	you	forgot	or	lost	
the	number	and	unable	to	operate	the	projector,	contact	the	service	station.	
Factory	default	set	No:	1	2	3	4*
PIN Code Lock No.
Lo�o PIN Code Lock No.
Factory	default	set	No:	4	3	2	1*
*	Should	the	four-digit...