Sanyo Projector Plc Wxe45 User Manual

Menu Bar
③ PC System Menu
Used	to	select	the	computer	system	(p.26).
⑥ Ima�e Adjust Menu
Used	to	adjust	the	computer	image	from	Contrast,	
Brightness,	Color	temp.,	White	balance	(R/G/B),	
Sharpness,	and	Gamma	(pp.31–32).
⑨ Settin� Menu
Used	to	set	the	projector’s	operating	configurations	
(pp.41–50).
⑧ Sound Menu
Used	to	adjust	the	volume	or	mute	the	sound	
(p.23).
⑤ Ima�e Select Menu
Used	to	select	an	image	level	from	Dynamic,	Standard,	Real,	
Blackboard	(Green),	Colorboard	and	Image	1–4	(p.30).
For...

Adjust	the	lens	focus	with	the	focus	lever.
Focus	Lever
•The	arrows	are	white	when	there	is	no	correction.•The	direction	of	the	arrow	which	are	being	corrected			turns	red.•The	arrows	disappear	at	the	maximum	correction.•If	you	press	the	KEYSTONE	button	on	the	remote	control	once	more	while	the	keystone	dialog	box	is	being	displayed,	the	keystone	adjustment	is	canceled.•The	adjustable	range	can	be	limited	depending	on	the		input	signal.•The	projected	picture	may	fluctuate	momently		depending	on	the...

Remote Control
Remote Control Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
COMPUTER/VIDEO button 
Note:
See the next page for the description of 
other buttons.
Press	the	FREEZE	button	to	freeze	the	picture	on	the	
screen.	To	cancel	the	Freeze	function,	press	the	FREEZE	
button	again	or	press	any	other	button.
FREEZE button
Press	the	COMPUTER...

Remote Control
D.ZOOM 
buttons
NO SHOW 
button 
AUTO PC 
button
Note:
 See the previous page for the description   
 of other buttons.
KEYSTONE button(See	page	22.)
POINT ▲▼ 
buttons
black	out	→	the	captured	image	→	normal	→	• • • • •
Press	the	NO	SHOW	button	to	black	out	the	image.	 To	
restore	to	normal,	press	the	NO	SHOW	button	again	or	
press	any	other	button.	When	the	projected	image	is	
captured	and	is	set	as	“User”	in	the	Logo	selection	(p.42),	
the	screen	changes	each	time	you	press	the	NO	SHOW...

Select	either 	Computer 	1 	or 	Computer 	2 	by 	pressing 	the	
COMPUTER	button	on	the	remote	control.
Before 	using 	COMPUTER 	button, 	select 	the 	correct 	input	
source	through	Menu	operation	as	described	below.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	Input	Menu	icon.
1
Input Menu
Use	the	Point	▲▼	buttons	to	move	the	red	arrow	
pointer	to	either	Computer	1	or	Computer	2,	and	then	
press	the	SELECT 	button.
2
After	the	Source...

The	Auto	PC	 Adjustment	
function	operates	to	adjust	
the	projector.	
PC System Menu
The	PC	System	Menu	icon	
The	selected	system	is	
displayed.
Available	system	selection.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	PC	System	Menu	icon.
Use	the	Point	▲▼	buttons	to	move	the	red	arrow	
pointer	to	the	desired	system,	and	then	press	the	
SELECT	button.
1
2
PC System Menu
Custom	Mode	(1–5)	set	in	the	
PC	Adjust	Menu	(pp.28-29).
PC...

Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	 Total	dots,	Horizontal,	and	Vertical	
positions	to	conform	to	your	computer.
Move	the	red	 frame	 pointer	 to	the	
Auto 	PC 	adj. 	item 	and 	press 	the	
SELECT 		button.
“Please	wait...”	appears	 while	Auto	
PC	adjustment	is	in	process.
PC Adjust Menu
PC	Adjust	Menu	icon
To store the adjusted parameters
The	system	parameters	adjusted	in	the	 Auto	PC	Adjustment	
can	be	stored	in	the	projector.	Once	parameters	are	stored,	
the...

Press	the 	MENU 	button 	to 	display 	the 	On-Screen	
Menu.	 Use	the	Point	◄►	buttons	 to	move	 the	red	 frame	
pointer	to	the	PC	 Adjust	Menu	icon.
1
2Use	the	Point	▲▼	buttons	to	move	the	red	frame		
pointer	to	the	desired	item	and	then	press	the	SELECT 	
button	to	display	the	adjustment	dialog	box.	Press	the	
Point	◄►	buttons	to	adjust	the	value.Move	the	red	frame	pointer	
to	the	desired	item	and	
press	the	SELECT	button.
PC Adjust MenuPC	Adjust	Menu	icon
Use	the	Point	◄►	buttons	to	adjust	the	value	to...

Use	the	Point	◄►	buttons	to	adjust	the	horizontal	area	
displayed	by	this	projector.
Display area H
Use	the	Point	◄►	buttons	to	adjust	the	vertical	area	
displayed	by	this	projector.
Display area V
Reset
Store
Exit	the	PC	Adjust	Menu.
Quit
To	store	the	adjusted	data,	select	“Store”	and	then	press	the	
SELECT	button.	Move	the	red	arrow	pointer	to	one	of	the	
Mode	1	to	5	in	which	you	want	to	store,	and	then	press	the	
SELECT	button.
To	reset	the	adjusted	data,	select	“Reset”	and	press	the	
SELECT	button.	A...

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	Image	Select	Menu	icon.
1
2Use	the	Point	▲▼	buttons	to	move	the	red	frame		
pointer	to	the	desired	level	and	then	press	the	SELECT	
button.
Ima�e Select Menu
Normal	picture	level	preset	on	this	projector.
Standard
Picture	level	with	improved	halftone	for	graphics.
Real
For	viewing	the	image	projected	on	a	blackboard.	See	
above	for	further	description.
Blackboard(Green)
Image	Select	Menu...