Sanyo Projector Plc Wxe45 User Manual

Display Blue back
Press the Point ◄► buttons to switch on/off. When this 
function is “On,” a blue image is displayed while the input 
signal is not detected. 
Keystone
Press the MENU button to display the On-Screen 
Menu. Use the Point 
◄► buttons to move the red 
frame pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in 
English, German, French, Italian, Spanish, Portuguese, 
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, 
Russian, Chinese,...

Capture
This function enables you to capture the image being 
projected and use it for a start-up display or interval of 
presentations.  
After capturing the projected image, go to the Logo select 
function and set it to “User.” Then the captured image is 
displayed when the projector is turned on next time or the 
NO SHOW button is pressed (p 24).
To capture the image, select “Yes.” To cancel the Capture 
function, select “No.”
Select "Yes" to capture 
the projected image. 
Select "Yes"...

Logo PIN code lock Dialog Box
Enter a Logo PIN code
Select a number by pressing the Point ▲▼ buttons.  
And then press the Point 
► button to fix the number 
and move the pointer.  The number changes to " ".  If 
you fixed an incorrect number, move the pointer to the 
number you want to correct by pressing the Point 
◄ 
button, and then select the correct number by pressing 
the Point 
▲▼ buttons.
Repeat this step to complete entering a four-digit 
number.
After entering the four-digit number,...

Ceiling 
Rear 
Ceiling
When this function is set to “On”, the picture is top/bottom 
and left/right reversed.  This function is used to project the 
image from a ceiling-mounted projector.Rear
When this function is set to “On”, the picture is left/right 
reversed.  This function is used to project the image to a 
rear projection screen.
44
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back 
of the projector is switchable for computer input or monitor 
output (p.9).  Select Computer 2 or Monitor...

Power mana�ement
Time	left	before	Lamp	is	off.
Press	the	SELECT	button	
at	Power	management	and	
this	box	appears.		Select	
one	of	three	settings	with	
the	Point	◄►	buttons,	and	
go	to	the	timer	with	the	
Point	▲▼	buttons	and	set	
time	with	the	Point	◄► 
buttons.
Power mana�ement
For	reducing	power	consumption	as	well	as	maintaining	
the	lamp	life,	the	Power	management	function	turns	off	the	
projection	lamp	when	the	input	signal	is	interrupted	and	no	
button	is	pressed	for	a	certain	period.
When	the...

4
On start
When	this	function	is	set	to	“On,”	the	projector	is	
automatically	turned	on	just	by	connecting	the	AC	power	
cord	to	an	outlet.
Note:
Be sure to turn the projector off properly (see “Turning Off 
the Projector” on page 19). If the projector is turned off 
in the incorrect sequence, the On start function does not 
operate properly.
Lamp control
Remote control
This	projector	provides	two	different	remote	control	codes;	
the	 factory-set,	 initial	code	(Code	1)	and	the	secondary	code...

47
Security (Alarm and PIN code lock settin�s)
This	function	allows	you	to	use	PIN	code	lock	and	Alarm	
function	to	set	the	security	for	the	projector	operation.
PIN code lock
This	function	prevents	the	projector	from	being	operated	
by	unauthorized	persons	and	provides	the	following	
setting	options	for	security.
Off……	 The	projector	is	not	locked	with	the	PIN	code.
On1……	Requires	to	enter	a	PIN	code	every	time												
turning	on	the	projector.		
On2……	Requires	to	enter	a	PIN	code	to	operate	the...

48
The	PIN	code	can	be	changed	to	your	desired	four-digit	
number.		
Select	"PIN	code	change"	with	the	Point	▼	button, and	
press	the	SELECT	button	to	display	the	New	PIN	code	
input	dialog	box.
Select	a	number	by	pressing	the	Point	▲▼	buttons.	And	
then	press	the	Point	►	button	to	fix	the	number	and	
move	the	pointer.	Repeat	it	to	complete	entering	a	four-
digit	number.	 After	entering	the	four-digit	number,	move	
the	pointer	to	"Set"	by	pressing	the	Point	►	button.	Then	
press	the...

49
This	function	is	used	to	reset	the	lamp	replacement	
counter.	When	replacing	the	projection	lamp,	reset	the	lamp	
replacement	counter	by	using	this	function.	See	page	58	for	
operation.Lamp counter 
This	function	provides	the	following	options	in	the	cooling	
fans’
	operation	after	turning	off	the	projector	(p.19).
L1	……	Normal	operation
L2	……		 Slower	and	lower-sound	than	the	normal	
operation	(L1),	but	it	takes	longer	to	cool	down	
the	projector.
Fan
Settin�
Choose	 the	running	 speed	of	cooling...

50
Settin�
Factory default
This	function	returns	all	setting	values	except	for	the	user	
logo,	PIN	code	lock,	Logo	PIN	code	lock,	the	lamp	counter	
and		the	filter	counter	to	the	factory	default	settings.Factory default
Exit	the	Setting	Menu.
Quit
Warnin� lo�
This
	function 	records 	anomalous 	operations 	while 	the 	
projector	 is	 in	 operation	 and	 use	 it	 when	 diagnosing	 faults.	
Up	 to	 10	 warning	 logs	 are	 displayed	 with	 the	 latest	 warning	
message	 at	 the	 top	 of	 the	 list,...