Sanyo Projector Plc Wxe45 User Manual

Use	the	Point	◄►	buttons	to	
adjust	the	value.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	Image	Adjust	Menu	icon.
1
2Use	the	Point	▲▼	buttons	to	move	the	red	frame		
pointer	to	the	desired	item,	and	then	press	the	
SELECT	button.	The	level	of	each	item	is	displayed.	
Use	the	Point	◄►buttons	to	adjust	each	level.
Move	the	red	frame	pointer	
to	the	desired	item	and	then	
press	the	SELECT 	button.
Ima�e Adjust Menu
Press	the	Point	◄...

Store
Exit	the	Image	Adjust	Menu.
Quit
To	store 	the 	adjusted 	data, 	select 	“Store” 	and 	press 	the	
SELECT 	button.	 The	Image	 Level	Menu	 appears.	 Use	the	
Point	▲▼	buttons	 to	choose	 one	of	the	 four	 image	 level	and	
press	 the	SELECT 	button.	 A	confirmation	 box	appears	 and	
then	select	“Yes.”
The	stored	data	can	be	called	up	by	selecting	“Image”	in	the	
Image	Level	Selection	on	page	30.
Move	the	red	frame	
pointer	to	the	desired	
image	level	(from	Image	
1	to	4)	and	then	press	
the	SELECT...

When	Digital 	zoom 	+ 	is 	selected, 	the 	On-Screen 	Menu	
d i s a p p e a r s 	a n d 	“ D . 	z o o m 	+ ” 	i s 	d i s p l a y e d . 	P r e s s 	t h e	
SELECT 	button 	to 	expand 	the 	image 	size. 	Use 	the 	Point	
▲▼◄►buttons	 to	pan	 the	image.	 The	Panning	 function	can	
work	only	when	the	image	is	larger	than	the	screen	size.
A	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	▲	button	on	the	remote	control.	
Di�ital zoom +
When	Digital	zoom	–	is	selected,	the	On-Screen	Menu...

Select	Video	by	pressing	the	VIDEO	button	on	the	remote	
control.
Before	using	VIDEO	button,	select	the	correct	input	source	
through	menu	operation	as	described	below.
Use	the	MENU	button	to	display	the	On-Screen	Menu.	
Press	the	Point	◄►	buttons	to	move	the	red	frame	
pointer	to	the	Input	Menu	icon.
Use	the	Point	▲▼	buttons	to	move	the	red	arrow	
pointer	to	Video	and	then	press	the	SELECT	button	to	
display	the	Source	Select	Menu	.	
1
2
VIDEO
Move	the	pointer	to	the	
desired	source	and	press	
the...

Select	Computer	1	by	pressing	the	COMPUTER	button	on	
the	remote	control.
Before	using	COMPUTER	button,	select	the	correct	input	
source	through	Menu	operation	as	described	below.
Use	the	MENU	 button	to	display	 the	On-Screen	 Menu.	
Press	the 	Point 	◄►	buttons 	to 	move 	the 	red 	frame	
pointer	to	the	Input	Menu	icon.
1
Computer 
1
Input Menu
Use	the 	Point 	▲▼	buttons 	to 	move 	the 	red 	arrow	
pointer 	to 	Computer 	1 	and 	then 	press 	the 	SELECT 	
button.		
2
After	the	Source	 Select	Menu...

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	AV	System	Menu	icon.
1
Video System Selection
AV System Menu (Video or S-video)
AV System Menu (Component)
Use	the	Point	▲▼	buttons	to	move	the	red	arrow	
pointer	to	the	desired	system	and	then	press	the	
SELECT	button.
2
If	the	projector	cannot	reproduce	proper	video	image,		
select	a	specific	broadcast	signal	format	from	among	PAL,	
SECAM,	NTSC,	NTSC	4.43,	PAL-M,	and	PAL-N.
Move	the...

Ima�e Select Menu
Image	Select	
Menu	icon
Select	an	image	level	from	among	Dynamic,	Standard,	
Cinema,	Blackboard	(Green),	Colorboard,	Image	1,	Image	
2,	Image	3,	and	Image	4	with	the	IMAGE	button	on	the	
remote	control.
Normal	picture	level	preset	on	this	projector.		
Standard
Picture	level	adjusted	for	the	picture	with	fine	tone.
Cinema
IMAGE button
Ima�e Level Selection 
Direct Operation
For	viewing	pictures	in	a	bright	room.
Dynamic
Remote Control
IMAGE
button
7
Video Input
Move	the	red	 frame...

Use	the	Point	◄►	buttons	
to	adjust	the	value.
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	◄►	buttons	to	move	the	red	frame	pointer	
to	the	Image	 Adjust	Menu	icon.
1
2Use	the	Point	▲▼	buttons	to	move	the	red	frame		
pointer	to	the	desired	item	and	then	press	the	SELECT 	
button.	The	level	of	each	item	is	displayed.	 Adjust	each	
level	by	pressing	the	Point	◄► buttons.Move	the	red	 frame	 pointer	
to	the	 desired	 item	and	then	
press	the	SELECT 	button.
Ima�e Adjust Menu
Press...

To	store	the	adjusted	data,	select	Store	and	press	the	
SELECT	button.	Select	a	level	from	Image	1	to	4	with	
the	Point	▲▼	buttons	and	press	the	SELECT 	button.	A	
confirmation	box	appears	and	then	select	“Yes.”
Stored	data	can	be	called	up	by	selecting	“Image”	in	the	
Image	Level	Selection	on	page	37.
Image	Level	Menu
Move	the	red	frame	pointer	to	
an	image	item	to	be	set	and	
then	press	the	SELECT 	button.
To	reset	the	adjusted	data,	select	Reset	and	press	the	
SELECT	button.	A	confirmation	box	appears...

This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	◄►	buttons	to	move	the	red	
frame	pointer	to	the	Screen	Menu	icon.
Use	the	Point	▲▼	buttons	and	move	the	red	frame		
pointer	to	the	desired	function	and	then	press	the	
SELECT	button.
1
2
Screen Menu
Provide	the	image	at	a	wide	screen	ratio	of	16:9.
Wide
Provide	the	image	to	fit	the	screen	size	while	maintaining	
the	aspect	ratio	of...