Home > Sanyo > Projector > Sanyo LNS-T32, LNS-T31A, LNS-W31A Parts Manual

Sanyo LNS-T32, LNS-T31A, LNS-W31A Parts Manual

Add to Favourites
    Download as PDF

    View the Sanyo LNS-T32, LNS-T31A, LNS-W31A Parts Manual for free. All the Sanyo manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Following checks and confirmations should be taken for safety. Check the following things by the time of the cabinet assembly after the lens replacement. 1. Check the lens is securely fixed. 2. Check the proper wiring and the wires are fixed properly. 3. Check each connector is connected properly. 4. Check no wiring is tangled on the gear of lens motor or the other mechanical parts. 5. Check no parts is missing, or no mounting part is loose. LCD PROJECTOR LENS MODEL LNS-T31A/W31A/T32 LENS REPLACEMENT...
    Page 2 Fig-1 Fig-2 Fig-3 Fig-4 SCREW A Remove 2 screws-A. Press the button (or remove 2 screws-B) on the lower of the lens cover and remove the lens cover. Remove the light-block sheet from the light- block sheet base. LENS REPLACEMENT PROCEDURE (FOR A TYPE ) REMOVE THE LENS COVER AND LIGHT- BLOCK SHEET (See Figure-1 and 2)1 1. 2. 2REMOVE THE LIGHT-BLOCK SHEET BASE (See Figure-3 and 4) Perform the stepstofor lens replacement. 16 BUTTON LENS COVERLIGHT-BLOCK SHEET BASE SCREW B (Some models)LIGHT-BLOCK SHEET...
    Page 3 Fig-6 Fig-7 Fig-8 3REMOVE THE LENS (See Figure-5 and 6) Remove the connector K16J of the circuit board. Remove the lens motor lead from lead holder. Remove screws-C (4 screws) which fastens the lens and remove the lens. Use the driver (3 mm, Green) included with the lens to remove the screws.1. 2. DRIVER IN THE LENS LENS MOUNTING BRACKET 4MOUNT THE LENS (See Figure-5 and 6) 5MOUNT THE LIGHT-BLOCK SHEET BASE (See Figure-7) 6MOUNT THE LIGHT-BLOCK SHEET AND LENS COVER (See Figure-8) Be careful not to drop...
    Page 4 Turn the lens cover to counter-clockwise and pull it toward front and remove the Lens Cover. Remove 2 Screws-A. Remove the front cabinet REMOVE THE LENS COVER AND FRONT CABINET1 1. 2. 2REMOVE THE LIGHT-BLOCK SHEET BASE AND LIGHT-BLOCK SHEET (See Figure-2) Perform the stepstofor lens replacement. 16 First set the lens at the fully lower position with lens shift adjustment. 3. Slide the light-block sheet base upward and remove it. Remove the light-block sheet from lens.1. 2. Fig-2 LIGHT-BLOCK SHEET BASE...
    Start reading Sanyo LNS-T32, LNS-T31A, LNS-W31A Parts Manual

    Related Manuals for Sanyo LNS-T32, LNS-T31A, LNS-W31A Parts Manual

    All Sanyo manuals