Sanyo Projector Plc Wxe45 User Manual
Have a look at the manual Sanyo Projector Plc Wxe45 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Use the Point ◄► buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2Use the Point ▲▼ buttons to move the red frame pointer to the desired item, and then press the SELECT button. The level of each item is displayed. Use the Point ◄►buttons to adjust each level. Move the red frame pointer to the desired item and then press the SELECT button. Ima�e Adjust Menu Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Bri�htness Image Adjust Menu icon Press the Point ◄ button to lighten the red tone; press the Point ► button to deepen the red tone (from 0 to 63). White balance (Red) Press the Point ◄ button to lighten the green tone; press the Point ► button to deepen the green tone (from 0 to 63). White balance (Green) Press the Point ◄ button to lighten the blue tone; press the Point ► button to deepen the blue tone (from 0 to 63). White balance (Blue) Selected Image level Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp. Ima�e Level Adjustment Note: After adjusting the White balance Red, Green, or Blue, the Color temp. level will change to “Adj.”. Use the Point ◄► buttons to adjust the gamma value to get better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness To reset the adjusted data, select “Reset” and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Reset 1 Computer Input
Store Exit the Image Adjust Menu. Quit To store the adjusted data, select “Store” and press the SELECT button. The Image Level Menu appears. Use the Point ▲▼ buttons to choose one of the four image level and press the SELECT button. A confirmation box appears and then select “Yes.” The stored data can be called up by selecting “Image” in the Image Level Selection on page 30. Move the red frame pointer to the desired image level (from Image 1 to 4) and then press the SELECT button. A confirmation box appears, then select “Yes.”Store item Press the SELECT button at this item to store the adjusted data. This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu icon. 1 Move the red frame pointer to the function and press the SELECT button. Use the Point ▲▼ buttons and move the red frame pointer to the desired function and then press the SELECT button. 2 Screen Menu Screen Menu icon Screen Size Adjustment Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Normal True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector automatically switches to the panning mode. Use the Point ◄► ▲▼ buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear. Full Provide the full screen image. Note: • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s resolution is higher than that, lower the resolution before connecting to the projector. • The image data other than 1280 x 800 is modified to fit the screen size in initial mode. • True, Full and D.Zoom+/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.44). • The items will be same as the items in video source when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC system Menu (p.26). Computer Input
When Digital zoom + is selected, the On-Screen Menu d i s a p p e a r s a n d “ D . z o o m + ” i s d i s p l a y e d . P r e s s t h e SELECT button to expand the image size. Use the Point ▲▼◄►buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. Di�ital zoom + When Digital zoom – is selected, the On-Screen Menu disappears and “D. zoom –” is displayed. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼, SELECT, and Point buttons. To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM ▲▼ buttons. Di�ital zoom – Remote Control D.ZOOM + button POINT buttons SELECT button D.ZOOM - button For zoomin� in and out the ima�es Note: • The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.29). • The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the custom is selected for the screen size. • The items will be same as the items in video source when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC system Menu (p.26). • Digital zoom +/– cannot be selected when Full or True is selected. • When “Custom” is selected , “Digital zoom -” is invalid. • True, Full and D.Zoom+/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.44). Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V……… Adjust the Horizontal/Vertical screen scale. H&V …………… When set to “On,” the aspect ratio is fixed. “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio. Position H/V…… Adjust the Horizontal/Vertical screen position. Common……… Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset………… Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” Custom Note: • When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. • When “Custom” is selected , “Digital zoom -” is invalid. Press the SELECT button at Common or Reset, to display a confirmation box. Computer Input
Select Video by pressing the VIDEO button on the remote
control.
Before using VIDEO button, select the correct input source
through menu operation as described below.
Use the MENU button to display the On-Screen Menu.
Press the Point ◄► buttons to move the red frame
pointer to the Input Menu icon.
Use the Point ▲▼ buttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu .
1
2
VIDEO
Move the pointer to the
desired source and press
the SELECT button.
Source Select Menu (VIDEO)
Input Menu
Move the pointer to the desired source and then press
the SELECT button.3
When selecting “Auto,” the projector
automatically detects the incoming video signal,
and adjusts itself to optimize its performance.
The projector selects connection in the following
order:
1. S-video
2. Video
Auto
When the video input signal is connected to the
VIDEO jack, select Video.
Video
When the video input signal is connected to the
S-VIDEO jack, select S-video.
S-video
Input Source Selection (Video, S-video)
Direct Operation
Menu Operation
Input Menu icon
Remote Control
VIDEO button
Note:
• Computer 2 is not displayed when the COMPUTER IN
2/MONITOR OUT terminal is set as Monitor out (p.44).
•When the Input Search function is set On1 or On2, the
input signal will be searched automatically (p.44).
4
Video Input
Move the pointer to Video and
press the SELECT button.
Video
Select Computer 1 by pressing the COMPUTER button on the remote control. Before using COMPUTER button, select the correct input source through Menu operation as described below. Use the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red frame pointer to the Input Menu icon. 1 Computer 1 Input Menu Use the Point ▲▼ buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. 2 After the Source Select Menu appeared for Computer 1, move the pointer to Component or RGB (Scart) and then press the SELECT button. 3 COMPUTER button Computer 1 Computer Input Source Selection (Component, RGB Scart 1-pin) Direct Operation Menu Operation Move the pointer (red arrow) to Computer 1 and press the SELECT button. Input Menu icon Move the pointer to Component or RGB (Scart) and press the SELECT button. Source Select Menu Remote Control COMPUTER button When the input source is coming from video equipment connected to the COMPUTER I N 1 / C O M P O N E N T I N t e r m i n a l w i t h a C o m p o n e n t - V G A C a b l e ( n o t s u p p l i e d ) , select Component. Component When the input source is coming from video equipment connected to the COMPUTER I N 1 / C O M P O N E N T I N t e r m i n a l w i t h a Scart-VGA Cable (not supplied), select RGB (Scart). RGB (Scart) Note: • Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.44). • Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only RGB signal. • When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.44) *See Note at the bottom of this page. 5 Video Input *
Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the AV System Menu icon. 1 Video System Selection AV System Menu (Video or S-video) AV System Menu (Component) Use the Point ▲▼ buttons to move the red arrow pointer to the desired system and then press the SELECT button. 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the pointer to the desired system and press the SELECT button. PAL/SECAM/NTSC/NTSC4.4/PAL-M/PAL-N The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. Auto COMPONENT VIDEO SIGNAL FORMAT Video or S-video Component The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. Auto AV System Menu icon The selected system is displayed. Move the pointer to the desired system and press the SELECT button. AV System Menu icon The selected system is displayed. Note: The AV System Menu cannot be selected when selecting RGB (Scart). Video Input
Ima�e Select Menu Image Select Menu icon Select an image level from among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control. Normal picture level preset on this projector. Standard Picture level adjusted for the picture with fine tone. Cinema IMAGE button Ima�e Level Selection Direct Operation For viewing pictures in a bright room. Dynamic Remote Control IMAGE button 7 Video Input Move the red frame pointer to the desired image level and press the SELECT button. The image level being selected. Dynamic Cinema Colorboard Ima�e 1 Ima�e Ima�e Blackboard(Green) Standard Ima�e 4 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ▲▼ buttons to move the red frame pointer to the desired level and then press the SELECT button. Normal picture level preset on this projector. Standard For viewing the image projected on a blackboard. See above for further description. Blackboard(Green) Ima�e 1–4 Menu Operation User preset image in the Image Adjust Menu (pp. 38-39). Ima�e 1–4 For viewing pictures in a bright room. Dynamic User preset image in the Image Adjust Menu (pp. 38-39). Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Colorboard Blackboard (Green) For viewing the image projected on a blackboard. This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Picture level with improved halftone for graphics. Cinema
Use the Point ◄► buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing the Point ◄► buttons.Move the red frame pointer to the desired item and then press the SELECT button. Ima�e Adjust Menu Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Bri�htness Press the SELECT button here to display other items. Image Adjust Menu icon Press the Point ◄ button to decrease the intensity of the color; press the Point ► button to increase the intensity of the color (from 0 to 63). Use the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color Tint Press the Point ◄ button to lighten the red tone; press the Point ► button to deepen the red tone (from 0 to 63). White balance (Red) Press the Point ◄ button to lighten the green tone; press the Point ► button to deepen the green tone (from 0 to 63). White balance (Green) Press the Point ◄ button to lighten the blue tone; press the Point ► button to deepen the blue tone (from 0 to 63). White balance (Blue) Press the SELECT button here to display previous items. Note: • The Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N. • After adjusting the White balance Red, Green or Blue, the Color temp. level will change to “Adj.”. Ima�e Level Adjustment Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp. 8 Video Input
To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ▲▼ buttons and press the SELECT button. A confirmation box appears and then select “Yes.” Stored data can be called up by selecting “Image” in the Image Level Selection on page 37. Image Level Menu Move the red frame pointer to an image item to be set and then press the SELECT button. To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Reset Store Exit the Image Adjust Menu. Quit Note: Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.36). Store item An interlaced video signal can be displayed in a progressive picture. Select one of the following options. Off………Disabled. L1……… For an active picture. L2……… For a still picture. Film…… For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Pro�ressive Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off……… Disabled. L1 ……… Lower reduction L2 ……… Higher reduction A confirmation box a p p e a r s a n d t h e n select “Yes.” Use the Point ◄► buttons to adjust the gamma value to get better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness 9 Video Input
This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Screen Menu icon. Use the Point ▲▼ buttons and move the red frame pointer to the desired function and then press the SELECT button. 1 2 Screen Menu Provide the image at a wide screen ratio of 16:9. Wide Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Normal Screen Size Adjustment Adjust the screen scale and position manually. Press the SELECT button at Custom icon. “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V……… Adjust the Horizontal/Vertical screen scale. H&V …………… When selecting “On,” the aspect ratio is fixed. “Scale V” appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V…… Adjust the Horizontal/Vertical screen position. Common ……… Save the adjusted scale to all the inputs. Press the SELECT button at Common to display the confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ………… Reset the all adjusted values. Press the SELECT button at Reset to display the confirmation box. To reset, press the SELECT button at “Yes.” Custom Note: • Zoom, Wide and Natural wide are not available when 720p, 1035i, or 1080i is selected in the AV System Menu (p.36). • When no signal is detected, Normal is set automatically and Aspect dialog box disappears. •The adjustable range of Scale H/V and Position H/V can be limited depending on the input signal. • Zoom, Natural wide, Wide and Full are not available when the 4:3 or 16:9 function is set to “On” in the Screen aspect(p.44). Press the SELECT button at Common or Reset, to display the confirmation box. 40 Video Input Move the red frame pointer to the desired function and press the SELECT button. Screen Menu icon Full Provide the full screen image. Natural wide Modify the 4:3 aspect ratio image to fit the screen size(16:9 aspect ratio) by stretching the image to make it look natural. Zoom Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9).Only for 4:3 video aspect ratio signals.