Sanyo Projector Plc Wxe45 User Manual
Have a look at the manual Sanyo Projector Plc Wxe45 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Menu Bar ③ PC System Menu Used to select the computer system (p.26). ⑥ Ima�e Adjust Menu Used to adjust the computer image from Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness, and Gamma (pp.31–32). ⑨ Settin� Menu Used to set the projector’s operating configurations (pp.41–50). ⑧ Sound Menu Used to adjust the volume or mute the sound (p.23). ⑤ Ima�e Select Menu Used to select an image level from Dynamic, Standard, Real, Blackboard (Green), Colorboard and Image 1–4 (p.30). For computer source ③ AV System Menu Used to select the system of selected video source (p.36). ⑤ Ima�e Adjust Menu Used to adjust the picture image from Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/B), Sharpness, Gamma, Noise reduction, and Progressive (pp.38–39). For video source Used to select input source, Video or Computer (pp.34–35). ④ PC Adjust Menu Used to adjust parameters to match with input signal format (pp.27–29). ④ Ima�e Select Menu Used to select an image level from Dynamic, Standard, Cinema, Blackboard (Green), Colorboard and Image 1–4 (p.37). ⑥ Screen Menu Used to set the size of image to Normal, Full, Zoom, Wide, Natural wide, or Custom (p.40). ① Guide Window Shows the selected Menu of the On-Screen Menu. ② Input Menu Used to select the input source, Computer or Video (p.25). ⑦ Screen Menu Used to adjust the size of image from Normal, True, Full, Custom, and Digital zoom +/– (pp.32– 33). For detailed functions, see Menu Tree on pages 62-63. ① Guide Window Shows the selected Menu of the On-Screen Menu. ② Input Menu ⑧ Settin� Menu Used to set the projector’s operating configurations (pp.41–50). ⑦ Sound Menu Used to adjust the volume or mute the sound (p.23). ⑤③⑧④①②⑥⑦⑨ ①②③④⑤⑥⑦⑧ 1 Basic Operation ⑩ ⑩ Wired Menu See owner’s manual “Network Set-up and Operation”. ⑨ ⑨ Wired Menu See owner’s manual “Network Set-up and Operation”. Note: Items will be same as the items in video source when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected.
Adjust the lens focus with the focus lever. Focus Lever •The arrows are white when there is no correction.•The direction of the arrow which are being corrected turns red.•The arrows disappear at the maximum correction.•If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment is canceled.•The adjustable range can be limited depending on the input signal.•The projected picture may fluctuate momently depending on the keystone adjustment.•“Keystone” disappears after 4 seconds. If a projected picture has keystone distortion, correct the image with the Keystone function. Press the KEYSTONE button on the remote control. The keystone dialog box appears. Correct keystone distortion with the Point ▲▼ buttons. Keystone adjustment can be stored (p.41). Reduce the upper width with the Point ▲ button. Reduce the lower width with the Point ▼ button. Keystone Correction Remote Control KEYSTONE button POINT▲▼ buttons Focus Adjustment Basic Operation
Remote Control Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. COMPUTER/VIDEO button Note: See the next page for the description of other buttons. Press the FREEZE button to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. FREEZE button Press the COMPUTER or VIDEO button to select an input source. See pages 25, 34–35 for more details. COMPUTER/VIDEO button FREEZE button 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Press the MUTE button on the remote control to turn off the sound. To restore the sound to its previous level, press the MUTE button again or press the VOLUME+/– buttons. Mute function is also effective for AUDIO OUT jack. Press the Point ◄► buttons to switch the mute function On/Off. When the sound is turned off, “On” is displayed. Press the Point ◄► buttons again to turn the sound back on. Press the Point ▲▼ buttons to move the red frame pointer to the desired item, and then press the SELECT button. Approximate level of the volume. Exit the Sound Menu. Volume Mute Approximate level of the volume. Press the MUTE button to set the Mute function On or Off. The display disappears after 4 seconds. Sound Menu Sound Menu icon Volume Remote Control VOLUME+ button VOLUME- button MUTE button Volume Mute Press the Point ► button to turn up the volume; press the Point ◄ button to turn down the volume. Mute Direct Operation Menu Operation Sound Adjustment Basic Operation
Remote Control D.ZOOM buttons NO SHOW button AUTO PC button Note: See the previous page for the description of other buttons. KEYSTONE button(See page 22.) POINT ▲▼ buttons black out → the captured image → normal → • • • • • Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as “User” in the Logo selection (p.42), the screen changes each time you press the NO SHOW button as follows. “No show” disappears after 4 seconds. NO SHOW button No show Press the AUTO PC button to operate the Auto PC function. See page 27 for more details. AUTO PC button Press the D.ZOOM buttons to zoom in and zoom out the images. See page 33 for more details. D.ZOOM buttons Press the P-TIMER button. The timer display “00:00” appears on the screen and the timer starts to count time (00:00–59:59). To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display disappears. P-TIMER button P-Timer display Press the IMAGE button to select an image level of the screen. See pages 30, 37 for more details. IMAGE button LAMP CONTROL button P-TIMER button IMAGE button VOLUME +/- buttons (See page 23.) Press the LAMP CONTROL button to select the lamp mode to change the brightness of the screen. High …… Brighter than the Normal mode Auto …… Brightness according with the input signal Normal … Normal brightness For details, see page 22. KEYSTONE button 4 LAMP CONTROL button Basic Operation
Select either Computer 1 or Computer 2 by pressing the COMPUTER button on the remote control. Before using COMPUTER button, select the correct input source through Menu operation as described below. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Input Menu icon. 1 Input Menu Use the Point ▲▼ buttons to move the red arrow pointer to either Computer 1 or Computer 2, and then press the SELECT button. 2 After the Source Select Menu appeared for Computer 1, move the pointer to RGB and then press the SELECT button. 3 Input Menu COMPUTER button Computer 1 Computer Input Source Selection Direct Operation Menu Operation Move the pointer (red arrow) to Computer 1 and press the SELECT button. Input Menu icon Move the pointer (red arrow) to Computer 2 and press the SELECT button. Move the pointer to RGB and press the SELECT button. Source Select Menu Remote Control COMPUTER button Note: • Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is set as Monitor out (p.44). • Computer 2 (COMPUTER IN 2/MONITOR OUT) can accept only the RGB signal. • When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.44) Computer 1 *See Notes at the bottom of this page. 5 Computer Input *
The Auto PC Adjustment function operates to adjust the projector. PC System Menu The PC System Menu icon The selected system is displayed. Available system selection. Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC System Menu icon. Use the Point ▲▼ buttons to move the red arrow pointer to the desired system, and then press the SELECT button. 1 2 PC System Menu Custom Mode (1–5) set in the PC Adjust Menu (pp.28-29). PC system can also be selected manually. Computer System Selection The projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If computer is selected as a signal source, the projector automatically detects the signal format and tunes to project proper images without any additional setting. (Signal formats provided in this projector is shown on page 65.) One of the following messages may appear when: The projector cannot recognize the connected signal conforming to the provided PC Systems. “Auto” is displayed on the PC System Menu icon and the Auto PC Adjustment function works to display proper images. If images are not projected properly, adjust manually. (pp.28–29) There is no signal input from computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 59.) Auto ----- The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.28–29). Mode 1 A PC System provided in the projector is selected. The projector selects a proper system provided in the projector and displays it. SVGA 1 Selectin� Computer System Manually *Mode 1 and SVGA 1 are examples. Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical positions to conform to your computer. Move the red frame pointer to the Auto PC adj. item and press the SELECT button. “Please wait...” appears while Auto PC adjustment is in process. PC Adjust Menu PC Adjust Menu icon To store the adjusted parameters The system parameters adjusted in the Auto PC Adjustment can be stored in the projector. Once parameters are stored, the setting can be done just by selecting a Mode in the PC System Menu (p.26). See “Store” on page 29, for details. Note: • Fine sync, Total dots, Horizontal, and Vertical positions of some computers cannot be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.28–29). • The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.26). Auto PC Adjustment Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to PC Adjust Menu. 1 2Use the Point ▲▼ buttons to move the red frame pointer to Auto PC adj. and then press the SELECT button twice. Auto PC adj. Menu Operation The Auto PC adjustment function can be operated directly with the AUTO PC button on the remote control. Remote Control AUTO PC button Direct Operation 7 Computer Input
Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2Use the Point ▲▼ buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Press the Point ◄► buttons to adjust the value.Move the red frame pointer to the desired item and press the SELECT button. PC Adjust MenuPC Adjust Menu icon Use the Point ◄► buttons to adjust the value to cut off flicker from the image displayed (from 0 to 31). Fine sync Use the Point ◄► buttons to adjust the number of total dots in one horizontal period to match your PC image. Total dots Use the Point ◄► buttons to adjust the horizontal picture position. Horizontal Use the Point ◄► buttons to adjust the vertical picture position.Vertical Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer. Current mode Use the Point ◄► buttons to adjust the clamp level. When the image has dark bars, try this adjustment. Clamp Press the SELECT button here to move on to other items. Use the Point ◄► buttons to adjust the value. Status (Stored/Free) of the selected Mode. Selected Mode Press the SELECT button at “Current mode” to show the information of the connected computer. Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas (Mode 1–5) to store those parameters manually adjusted, which allows you to recall the setting for a specific computer. 8 Computer Input
Use the Point ◄► buttons to adjust the horizontal area displayed by this projector. Display area H Use the Point ◄► buttons to adjust the vertical area displayed by this projector. Display area V Reset Store Exit the PC Adjust Menu. Quit To store the adjusted data, select “Store” and then press the SELECT button. Move the red arrow pointer to one of the Mode 1 to 5 in which you want to store, and then press the SELECT button. To reset the adjusted data, select “Reset” and press the SELECT button. A confirmation box appears and then select “Yes.” All adjustments return to their previous figures. Mode free Vacant ModeValues of “Total dots,” “Horizontal,” “Vertical,” “Display area H,” and “Display area V.” Close this dialog box. To store adjusted data To clear adjusted data To clear the stored data, select “Mode free” and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Note: Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.26). T h i s M o d e h a s stored parameters. Move the red frame pointer to an item and press the SELECT button. 9 Computer Input
Press the MENU button to display the On-Screen Menu. Use the Point ◄► buttons to move the red frame pointer to the Image Select Menu icon. 1 2Use the Point ▲▼ buttons to move the red frame pointer to the desired level and then press the SELECT button. Ima�e Select Menu Normal picture level preset on this projector. Standard Picture level with improved halftone for graphics. Real For viewing the image projected on a blackboard. See above for further description. Blackboard(Green) Image Select Menu icon Select an image level from among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, and Image 4 with the IMAGE button on the remote control. IMAGE button Dynamic Real Colorboard Ima�e 1 Ima�e Normal picture level preset on the projector. Picture level with improved halftone for graphics. Standard Real Ima�e 1–4 Ima�e Level Selection Direct Operation Menu Operation Ima�e User preset image in the Image Adjust Menu (pp.31-32). Ima�e 1–4 Blackboard (Green) For viewing the image projected on a blackboard. This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Blackboard(Green) For viewing pictures in a bright room. Dynamic For viewing pictures in a bright room. Dynamic User preset image in the Image Adjust Menu (pp.31-32). Standard Remote Control IMAGE button 0 Computer Input Ima�e 4 Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the SELECT button to choose the color. Colorboard Move the red frame pointer to the desired level and press the SELECT button. The image level being selected.