Sanyo Plc Xm100l Projector User Manual

51

Setting
Language                                                      EnglishMenu positionInput button                                                   Mode 1Display                                                          OnBackground                                                   BlueLogoLamp controlFilter controlFan control                                                     NormalSimple mode                                                  OnRemote control...

5

This function decides whether to display On-Screen Displays.
 On ...............................  Show all the On-Screen displays. Use this 
function when you want to project images 
after the lamp becomes bright enough. The 
factory default setting is in this option.
 Countdown Off  ..........  Show the input image instead of the 
countdown when turning on the projector. 
Use this function when you want to project 
the image as early as possible even when 
the lamp is not bright enough.
 Off...

5

Setting
Off
Logo select
Capture
Capture
This function enables you to capture an image being projected to 
use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.  
A confirmation box appears and select yes to capture the projected 
image.
After capturing the projected image, go to the Logo select function 
and set it to User. Then the captured image will be displayed the 
next time you turn on the projector.
To cancel the capture function,...

54

Setting
Enter a Logo PIN code
Use  the  Point ▲▼  buttons  to  enter  a  number.  Press  the  Point ► 
button to fix the number and move the red frame pointer to the next 
box.  The  number  changes  to .  If  you  fixed  an  incorrect  number, 
use the Point ◄ button to move the pointer to the number you want 
to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press 
the SELECT...

55

This function allows you to change brightness of the screen.
Lamp life control
HDMI setupTerminal                                                        Computer 2Pointer                                                          DotStandby mode                                               Eco
Language                                                      EnglishMenu positionInput button                                                   Mode 1Display...

56

Choose the running speed of cooling fans from the following options.
 Normal ......  Operate in this mode under normal conditions.
 Max  ...........  Use this mode when you want to increase the cooling 
effect when operating the projector in high ambient 
temperature environment. Fan noise is louder than 
Normal. 
Setting
Simple mode buttons
Only these buttons are active when the simple mode is set to On.  [ON, STAND-BY, INPUT, AUTO PC, INFO., MENU, SCREEN, SHUTTER, ▲▼◄►, SELECT, VOL.+, VOL.-, MUTE,...

57

Note:
	 •	Factory	default	is	
Ready: 5 Min.
	 •	 	
When	the	shutter	is	closed	while	the	Power	management	function	
is	working,	the	Power	management	function	is	released.
Setting
Select a location of the infrared remote receiver of the remote control.\
 See “Remote Control Receivers and Operating Range” on page 15 for \
details.
 All  ............  Activate all of the receivers.
 Front & Top. . . . . .Activate both the front and top receivers.
 Top & Back . . . . . .Activate both the top and back...

5

Setting
When this function is set to On, the projector will be automatically 
turned on just by connecting the AC power cord to the wall outlet.
Note:
				 Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	 the	Projector”	on	page	24).	If	the	projector	is	turned	off	in	
the	incorrect	sequence,	the	On	start	function	does	not	work	
properly.
You can emphasize a part of the projected image with this function. 
Use the Point ▲▼ buttons to select a pattern of the Pointer (Arrow, 
Finger,...

59

Setting
Key lock
P-timer
Video delay control
Key lock
PIN code lock
This function locks the side control and remote control buttons 
to prevent operation by unauthorized persons.
  . . . . . .Unlocked.
  . . . . . .Lock the operation of the side control.
To unlock, use the remote control.
   . . . . . .Lock the operation of the remote 
control. To unlock, use the side control.
If the side control accidentally becomes locked and you do 
not have the remote control nearby or there is something 
wrong...

60

Setting
Use the Point ▲▼ buttons to select Off, On1 or On. Press the 
SELECT button to close the dialog box.Change the PIN code lock setting
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point ► 
button to fix the number and move the red frame pointer to the 
next box. The number changes to . If you fixed an incorrect 
number, use the Point ◄ button to move the pointer to the 
number you want to correct, and then enter the correct number.
Repeat this step to complete...