Sanyo Plc Xm100l Projector User Manual
Have a look at the manual Sanyo Plc Xm100l Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51
Setting
Language EnglishMenu positionInput button Mode 1Display OnBackground BlueLogoLamp controlFilter controlFan control NormalSimple mode OnRemote control Mode 1RC sensor BackPower management Off
Setting Menu
Press the MENU button to display the On-Screen Menu.
Press the Point ▲▼ buttons to select Setting and press the
Point ► or the SELECT button to access the submenu items.
1
Use the Point ▲▼ buttons to select the desired item and
then press the Point ► or the SELECT button to access the
selected item.
This projector has a Setting menu that allows you to set up the
other various functions described below.
Use the Point ▲▼ buttons to select the desired item and
then press the SELECT button.
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean and Japanese.
HDMI setupTerminal Computer 2Pointer DotStandby mode Eco
Language EnglishMenu positionInput button Mode 1Display OnBackground BlueLogoLamp controlFilter controlFan control NormalSimple mode OnRemote control Mode 1RC sensor BackPower management Off
Language
This function is used to change the position of the On-Screen Menu.
Select Menu position and press the SELECT button. The Menu
position screen appears.
The Menu position changes each time you press the SELECT button
as follows.
the top left the top right the center the bottom left the
bottom right the top left .....
This function detects the input signal automatically. When a signal is
found, the search will stop. Use the Point ▲▼ buttons to select one
of the following options.
Mode 1......Input search will not work.
Mode
......Input search works under the following situation:
– When pressing the INPUT button on the side control.
or the remote control.
Mode
......Input search works under the following situation:
– When turning on the projector by pressing the ON/
STAND-BY button on the side control or pressing the
ON button on the remote control.
– When pressing the INPUT button on the remote
control or on the side control.
- When no signal is detected.
Note:
•While Input button is set to Mode 3, and no signal is
detected, if the Shutter or Freeze function is active, cancel
it to activate the Input search.
•While Input button is set to
Mode 1 or Mode 2, the status
of Input and Lamp are displayed every time the signal is
switched.
•Only the last selected input source can be detected.
•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND- BY or MENU button is pressed during Input search is
in progress, Input search will stop and go back to the
previous input signal.
Setting
Language
Menu position
Input button
5
This function decides whether to display On-Screen Displays.
On ............................... Show all the On-Screen displays. Use this
function when you want to project images
after the lamp becomes bright enough. The
factory default setting is in this option.
Countdown Off .......... Show the input image instead of the
countdown when turning on the projector.
Use this function when you want to project
the image as early as possible even when
the lamp is not bright enough.
Off ............................... Hide the On-Screen Displays except;
● On-Screen Menu
● Power off? (p.24)
● No signal for Power management.
(p.57)
● Please wait . . .
● Arrows for the True function in the
Screen Menu (p.42)
● P-timer
Setting
Select the background screen for when no input signal is detected.
Press the Point ▲▼ buttons to switch between each option.
Blue. . . . Project a blue background.
Black . . . Project a black background.
It is invalid when there is no image.
User. . . . Project an image captured in the Logo setting.
Back
Logo select
This function allows you to customize the screen logo with Logo
select, capture, Logo PIN code lock and Logo PIN code
change functions.
Note:
When
On is selected in the Logo PIN code lock function, Logo select ,
Capture and Logo PIN code change cannot be selected.
Logo select
This function decides on the starting-up display from among
following options.
User .......... Show the image you captured.
Default ...... Show the factory-set logo.
Off ............. Show the countdown display only.
Off
Off
Display
Background
Logo (Logo and Logo PIN code lock settings)
5 Setting Off Logo select Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select yes in the "Quit?" confirmation box. Note: • Before capturing an image, select Standard in the Image Select Menu to capture a proper image (pp.40, 46). • A signal from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p , 1035i , 1080i and 1080p. • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock is set to On , Capture cannot be selected. • When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing. • When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off. Off Logo select Logo PIN code lockThis function prevents an unauthorized person from changing the screen logo. Off ............. The screen logo can be changed freely from the Logo Menu (p.52). On ............. The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to "4321" at the factory. Logo PIN code lock
54 Setting Enter a Logo PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number () will turn red for a moment. Enter the correct Logo PIN code all over again. Logo PIN code can be changed to your desired four-digit number. Press the Point ▼ button to select Logo PIN code change and then press the SELECT button. The New Logo PIN code input dialog box appears. Set a new Logo PIN code. Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to "PIN code lock" on pages 59-60. Use the Point ▲▼ buttons to switch On or Off, and then press the SELECT button to close the dialog box. Change the Logo PIN code lock setting Enter a Logo PIN code After a correct Logo PIN code is entered, the following dialog box appears. CAUTION: WHEN yOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO . MEMO ON PAGE 4, AND KEEP IT SECUREL y . SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED . Change the Logo PIN code lock setting Off Logo select Logo PIN code change Change the Logo PIN code Next Logo select
55
This function allows you to change brightness of the screen.
Lamp life control
HDMI setupTerminal Computer 2Pointer DotStandby mode Eco
Language EnglishMenu positionInput button Mode 1Display OnBackground BlueLogo Filter controlFan control NormalSimple mode OnRemote control Mode 1RC sensor BackPower management Off
Lamp control
Select the lamp operation when the total lighting time of a lamp
exceeds the recommended total hours of use.
Mode 1 ............ A lamp can be turned on even after
exceeding the recommended total hours of \
use.
Mode ............ A lamp can be turned on even after
exceeding the recommended total hours of
use. But the projector turns off automatically
after 3 minutes.
Lamp life control
Note:
• Lamp mode cannot be changed for a while after turning on the
projector. Lamp needs some time to stabilize after the power
is turned on. Stored lamp mode will be active after the lamp is
stabilized.
• If Mode 2 has been selected and the projection lamp
exceedes the recommended total hours of use, the
replacement icon will be displayed at the time of power-on.
Then the projector will turn off after 3 minutes.
The Lamp replacement icon will not appear when the Display
function is set to Off (p.52), during "Freeze" (p.30), or "Shutter"
(p.27).
Lamp replacement icon
Setting
Auto . . . . . Brightness according to the input signal.
Normal . . . Normal brightness.
Eco 1 . . . . Lower brightness and decrease of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life.
Eco 2 . . . . Lower brightness and increase of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life. It is
recommended to use Eco 2 when using the
projector continuously over a long period of time.
The fan noise becomes louder in Eco 2 than in
Eco 1. Select the suitable mode for the used
environment.
Lamp control
Note:
The fan noise becomes louder in Eco 2 than in Eco 1.
Select the suitable mode for the used environment.
56 Choose the running speed of cooling fans from the following options. Normal ...... Operate in this mode under normal conditions. Max ........... Use this mode when you want to increase the cooling effect when operating the projector in high ambient temperature environment. Fan noise is louder than Normal. Setting Simple mode buttons Only these buttons are active when the simple mode is set to On. [ON, STAND-BY, INPUT, AUTO PC, INFO., MENU, SCREEN, SHUTTER, ▲▼◄►, SELECT, VOL.+, VOL.-, MUTE, RESET/ON/ALL-OFF switch] Number buttons (p.14) also become active only when setting the remote control codes numbers or entering the PIN code numbers (pp. 54, 60). Filter control This function decides whether to activate the simple mode. Off . . . . Simple mode function is off. On . . . . Only the simple mode buttons are active. You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll. Note: • Filter replacement icon and Please wait... message appear on the screen when the filter is being scrolled. • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. A confirmation box appears and then select yes. Back The eight different remote control codes (Code 1-Code ) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes ( Code to Code ). The same code should be set on both the projector and the remote control. For example, operating the projector in Code 7, the remote control code also must be switched to Code 7. To change the code for the projector Select a remote control code in this Setting Menu. To change the code for the remote control: Press and hold the MENU button and a number button (1-8) on the remote control for more than five seconds to switch between the codes. See “Remote Control Code” on page 16. Note: • When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector. • If the batteries are removed from the remote control for a long period of time, the remote control code will be reset. Filter control Fan control Simple mode Remote control Note: Warning icon and Simple mode : On message appear on the screen when press the button which is not the simple mode button.
57 Note: • Factory default is Ready: 5 Min. • When the shutter is closed while the Power management function is working, the Power management function is released. Setting Select a location of the infrared remote receiver of the remote control.\ See “Remote Control Receivers and Operating Range” on page 15 for \ details. All ............ Activate all of the receivers. Front & Top. . . . . .Activate both the front and top receivers. Top & Back . . . . . .Activate both the top and back receivers. Front & Back . . . .Activate both the front and back receivers. Front ....... Activate only the front receiver. Top .......... Activate only the top receiver Back ........ Activate only the back receiver. Timer left before Lamp is off. Power management 1/2 Language EnglishMenu positionInput button Mode 1Display OnBackground BlueLogoLamp controlFilter controlFan control NormalSimple mode OnRemote control Mode 1RC sensor Back Min Min For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the side control or remote control is pressed. Shut down ........... When the lamp has been fully cooled down, the power will be turned off. Off ........................ Power management function is off. Timer.................... If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point ▲▼ buttons to set the Timer(1~30Min). This function is available when operating the projector via network. Network .......... Supply the power to the network function even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco.................... Select Eco when you do not use the projector via network. The projector’s network function will stop when turning off the projector. Refer to the owner’s manual of “Network Set-up and Operation”. Note: • Factory default is Network. • When selecting Network , the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off. RC sensor Power management Standby mode
5
Setting
When this function is set to On, the projector will be automatically
turned on just by connecting the AC power cord to the wall outlet.
Note:
Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in
the incorrect sequence, the On start function does not work
properly.
You can emphasize a part of the projected image with this function.
Use the Point ▲▼ buttons to select a pattern of the Pointer (Arrow,
Finger, or Dot) (p.32)
Standby mode NetworkOn start OnPointer Dot P-timer \
SecurityShutterVideo delay control OffFilter counterTest patternFactory default
min
P-TimerCount upCount down
Timer 30\
MinStartResetExit
min
Count upCount down
Timer 30 M\
inStartResetExit
P-Timer
This function allows you to change the presentation of the P-timer
and execute it.
Select one of the following options:
Count up ............. The P-timer display 000:00 appears on the
screen and the count starts ( 000:00–10:00)
Count down ........ The time set in the Timer setting appears on the
screen and the countdown starts.
Timer.................... Use the Point ▲▼ buttons to set the Timer
( 1–10 Min). Only set to Count down, Timer is
active. Factory default velue is 10 Min.
Start ..................... It executes the count up or count down
function. Press the SELECT button at Start,
Start changes to Stop in the Screen Menu. At
that time, press the SELECT button at Stop
to stop Count up or Count down, and Stop
changes to Restart in the Screen Menu. Press
the SELECT button at Restart to resume
Count up or Count down.
Reset ................... Reset the P-timer values. Press the SELECT
button at Reset to return to Factory default
value.
Exit ....................... To exit the P-timer operation.
Stop or Cancel the P-timer via Remote Control
To stop the P-timer, press the P-TIMER button.
To cancel the P-timer, press and hold the P-TIMER button for a few
seconds.
P-TIMER
P-timer display
On start
Pointer
P-timer
59 Setting Key lock P-timer Video delay control Key lock PIN code lock This function locks the side control and remote control buttons to prevent operation by unauthorized persons. . . . . . .Unlocked. . . . . . .Lock the operation of the side control. To unlock, use the remote control. . . . . . .Lock the operation of the remote control. To unlock, use the side control. If the side control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off . . . . .Unlocked. On1 . . . . .Enter the PIN code every time turning on the projector. On . . . . .Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code. Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The "1234" is set as the initial PIN code at the factory. If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. Off PIN code lock Off Off Security (Key lock and PIN code lock)
60 Setting Use the Point ▲▼ buttons to select Off, On1 or On. Press the SELECT button to close the dialog box.Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number () will turn red for a moment. Enter the correct PIN code all over again. Enter a PIN code The PIN code can be changed to your desired four-digit number. Press the Point ▼ button to select PIN code change and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code. Change the PIN code CAUTION: WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO ON PAGE 4, AND KEEP IT SECUREL y . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED . Off PIN code change