Sanyo Plc Xm100l Projector User Manual
Have a look at the manual Sanyo Plc Xm100l Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 38
Some computers employ special signal formats which may not be tuned by M\
ulti-Scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match t\
hose special signal formats. The projector has
10 independent memory areas to store those parameters manually adjusted.\
It allows you to recall the setting for a specific
computer.
Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC...](http://img.usermanuals.tech/thumb/67/95722/w64_sanyo-plc-xm100l-manual_d-37.png "Page 38
Some computers employ special signal formats which may not be tuned by M\
ulti-Scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match t\
hose special signal formats. The projector has
10 independent memory areas to store those parameters manually adjusted.\
It allows you to recall the setting for a specific
computer.
Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC...")
![Page 39
9
Computer Input
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p , 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.36).
• When input computer signal to the projector, PC adjust function will become available.
Auto PC adj.Fine syncTotal dots 1\
366Position H \
0Position V \...](http://img.usermanuals.tech/thumb/67/95722/w64_sanyo-plc-xm100l-manual_d-38.png "Page 39
9
Computer Input
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p , 575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.36).
• When input computer signal to the projector, PC adjust function will become available.
Auto PC adj.Fine syncTotal dots 1\
366Position H \
0Position V \...")
41 Computer Input Image adjust MenuPress the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 Use the Point ▲▼ buttons to select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Note: When White balance Red, Green or Blue is adjusted, Color temp. will change to adj.. Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63). Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63). Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63). Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid or High). Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31). Contrast 32Brightness 32Color temp. HighRed 2\ 8Green 32Blue 3\ 5OffsetSharpness 8Gamma 8ResetStore Contrast 32Brightness 32Color temp. HighRed 2\ 8Green 32Blue 3\ 5OffsetSharpness 8Gamma 8ResetStore Use the Point ◄► buttons to adjust the setting value. Selected Image mode Press the Point ◄ button to lighten red/green/blue tone of the black level of an image; press the Point ► button to deepen red/green/ blue tone of the black level of an image. Image Adjustment Contrast Brightness Color temp . White balance (Red) White balance (Green) White balance (Blue) Offset(Red/Green/Blue) Sharpness Gamma
4 Select the desired screen size that conforms to the input signal source. SCREEN MENU Provide the image at the normal computer aspect ratio of 4:3. Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9. Note: • The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector. • The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode. • True , Full and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.36) 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button. NormalTrueWideFullCustomDigital zoom +Digital zoom -KeystoneCeilingRearReset NormalTrueWideFullCustomDigital zoom +Digital zoom -KeystoneCeilingRearReset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. To store the adjusted data, select Store and press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 10 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–10) in the Image Mode Selection on page 40. A confirmation box appears and then select yes. Image 1Image 2Image 3Image 4Image 5Image 6Image 7Image 8Image 9Image 10 Where to store? Store Computer Input Reset Store Screen Size Adjustment Normal True Wide
4 Provides the full screen image. Computer Input Adjust the screen scale and position manually with this function. Press the Point ►button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V ............. Adjust the Horizontal/Vertical screen scale. H&V ...................... When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ........ Adjust the Horizontal/Vertical screen position. Common .............. Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at yes. When Custom is selected, the saved scale is used. Reset ................... Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. Custom Select Digital zoom +. The On-Screen Menu disappears and D . zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM button, SELECT and Point buttons. Select Digital zoom – . The On-Screen Menu disappears and D . zoom – appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM button on the remote control. To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 33-35) again or adjust the screen size with the D.ZOOM button. Note: • The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.39). • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True , Full and Digital zoom +/– cannot be selected when 480i , 575i, 480p or 575p is selected in the PC System Menu (p.36). • Digital zoom +/- cannot be selected when Full or True is selected. • Digital zoom – cannot be operated when Custom is selected. Full Custom Digital zoom + Digital zoom -
44
Computer Input
This function is used to adjust keystone distortion of the projected
image. Use the Point ▲▼ buttons to choose the item you want to
adjust.Keystone
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling
Rear
When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.
Keystone
Ceiling
Rear
Reset
Adjust the Horizontal/Vertical keystone distortion of the projected
image.
Standard
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue,
and Off.
Store
Store .......Keep the keystone correction even when the AC
power cord is unplugged.
Reset .......Release the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the
Standard (for Vertical/Horizontal) /Corner correction adjustment. The
Standard or Corner correction adjustment dialog box appears. Use the
Point ▲▼◄► buttons to correct the Standard or Corner distortion.
(p.31)
45 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4 .4 , PAL-M, and PAL-N. The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 105i or 100i, select the system manually. If the projector cannot reproduce proper video image, select a specific component video signal format from among 40i, 575i, 40p , 575p, 70p, 105i, 100i, and 100p. Video jack or S-video jack The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. Video Input 1AV System Menu (Video or S-video) AV System Menu (y , Pb/Cb, Pr/Cr) Input 1 RGB(PC an\ alog)Input 2 RGBInput 3 Video System NTSC Input 1 RGB(PC an\ alog)Input 2 RGBInput 3 Y, Pb/Cb, Pr/Cr System Auto Video Y, Pb/Cb, Pr/Cr 1080p1080i1035i720p575p480p575i480i Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Video, S-video or Computer 1(Component) and then press the SELECT button. Use the Point ▲▼ buttons to select System and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired system and then press the SELECT button. Note: The AV System Menu cannot be selected when selecting RGB (Scart). Video System Selection Auto y, Pb/Cb, Pr/Cr jacks PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N Auto y, Pb/Cb, Pr/Cr SIGNAL FORMAT
46 Normal picture level preset on the projector. Picture level adjusted with fine tone. User preset picture adjustment in the Image adjust Menu. (p.48) Video Input StandardCinemaImage 1Image 2Image 3Image 4Image 5Image 6Image 7Image 8Image 9Image 10 Image select Menu 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. StandardCinemaImage 1Image 2Image 3Image 4Image 5Image 6Image 7Image 8Image 9Image 10 Image Level Selection Menu Operation Standard Cinema Image 1–10
47
1
Press the Point ◄ button to decrease the contrast; press the Point
► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press the
Point ► button to increase the brightness (from 0 to 63).
Press the Point ◄ button to lighten red tone; press the Point ►
button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press the Point ►
button to deepen green tone (from 0 to 63).
Press the Point ◄ button to lighten blue tone; press the Point ►
button to deepen blue tone (from 0 to 63).
Use the Point ◄► buttons to select the desired Color temp. level
(XLow, Low, Mid or High ).
Press the Point ◄ button decrease the intensity of the color; press
the Point ►button increase the intensity of the color (from 0 to 63).
Press the Point ◄► buttons to adjust the tint value to get a proper
color balance (from 0 to 63).
Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to
Adj.
• Tint cannot be selected when the video system is PAL, SECAM , PAL-M or PAL-N (p.45).
Image adjust Menu
Contrast 32Brightness 32Color 3\
2Tint 3\
2Color temp. HighRed 2\
8Green 32\
Blue \
35OffsetSharpness 8Gamma 8ResetStore
\
1/2
Selected Image mode
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Image adjust and then press
the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item and then
press the SELECT button to display the adjustment dialog
box. Use the Point ◄► buttons to adjust the setting value.
ResetStore
Contrast 32Brightness 32Color 3\
2Tint 3\
2Color temp. HighRed 2\
8Green 32\
Blue \
35OffsetSharpness 8Gamma 8ResetStore
\
1/2
Use the Point ◄►
buttons to adjust the
setting value.
Video Input
Image Adjustment
Contrast
Brightness
Color
Tint
Color temp .
White balance (Green)
White balance (Red)
White balance (Blue)
4 Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 31). An interlaced video signal can be displayed in progressive mode. Press the Point ◄► buttons to change the progressive scan mode. Off ........... Progressive scan mode is Off. On ........... Progressive scan mode is On . Film ......... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Noise interference on the screen can be reduced. Press the Point ◄► buttons to change the noise reduction mode. Off ........... Noise reduction mode is Off. On ........... Noise reduction mode is On. Note: • Noise reduction and Progressive cannot be selected when 480p, 575p or 720p is selected (p.45). • Noise reduction cannot be selected when 1080p is selected (p.45). To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Image 1Image 2Image 3Image 4Image 5Image 6Image 7Image 8Image 9Image 10 Where to store? To store the adjusted data, select Store and press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Images 1 to 10 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1-10) in the Image Mode Selection on page 46. A confirmation box appears and then select yes. Store Video Input Press the Point ◄ button to lighten red/green/blue tone of the black level of an image; press the Point ► button to deepen red/ green/blue tone of the black level of an image (from 0 to 63). Offset(Red/Green/Blue) Sharpness Gamma Noise reduction Progressive Reset Store
49 Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V are limited depending on the input signal. • Wide cannot be operated when 720p , 1035i , 1080i or 1080p is selected on AV System Menu (p.45). Video Input Custom 1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V ............. Adjust the Horizontal/Vertical screen scale. H&V ...................... When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust the Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ........ Adjust the Horizontal/Vertical screen position. Common .............. Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at yes, When Custom is selected, the saved scale is used. Reset ................... Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes”. Provide the image at the 16:9 wide screen ratio. Screen Size Adjustment Normal Wide Custom
50
Video Input
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling
Rear
When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.
Keystone
This function is used to adjust keystone distortion of the projected
image. Use the Point ▲▼ buttons to choose the item you want to
adjust.
Keystone
Adjust the Horizontal/Vertical keystone distortion of the
projected image.
Standard
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue,
and Off.
Store
Store .......Keep the keystone correction even when the AC
power cord is unplugged.
Reset ......Release the keystone correction when the AC
power cord is unplugged.
Press the KEYSTONE button on the remote control to switch the
Standard (for Vertical/Horizontal) /Corner correction adjustment.
The Standard or Corner correction adjustment dialog box
appears. Use the Point ▲▼◄► buttons to correct the Standard
or Corner distortion. (p.31)
Ceiling
Rear
Reset