Sanyo Plc Xm100l Projector User Manual

1

Audio Output
AUDIO IN 1/2 
Unplug	the	power	cords	of	both	the	
projector	and	external	equipment	from	the	
AC	outlet	before	connecting	cables.
Cables used for connection ( = Cables not supplied with this projector.)
Audio Output
Installation
Audio cable (stereo)
(R)(L)
External Audio Equipment
Audio Input
AUDIO OUT (stereo)
• Audio cable 
(R)(L)
(R)(L)
Audio 
cable
Audio cable (stereo)Audio cable (stereo)
Connecting for Audio Signal 

22

This	 projector 	 uses 	 nominal 	 input 	 voltages 	 of 	 100–120 	 V 	 or 	 200–
240 	 V 	 AC 	 and 	 it 	 automatically 	 selects 	 the 	 correct 	 input 	 voltage. 	
It
	 is 	 designed 	 to 	 work 	 with 	 single-phase 	 power 	 systems 	 having 	 a 	
grounded
	 neutral 	 conductor. 	 To 	 reduce 	 the 	 risk 	 of 	 electrical 	 shock, 	
do not plug into any other type of power system.
If you are not sure of the type of power being supplied, consult 
your authorized dealer or service station....



Connect the projector’s AC power cord into an AC outlet. The 
LAMP indicator lights red and the POWER indicator lights 
green.
Press the ON/STAND-BY button on the side control or the ON 
button on the remote control. The LAMP indicator dims and the 
cooling fans start to operate. The preparation display appears 
on the screen and the countdown starts. 


1
The preparation display will disappear after 30 seconds.
4After the countdown, the input source that was selected the last...

4

Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that 
allows the person who knows it to operate the projector. Setting a 
PIN code prevents unauthorized use of the projector. 
A PIN code consists of a four-digit number. Refer to the PIN code 
lock function in the Setting Menu on page 59-60 for locking operation 
of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer 
be started....

5

Side Control
MENU button
On-Screen Menu
Remote Control
POINT buttons
SELECT button
MENU button
Basic Operation
The projector can be adjusted or set via the On-Screen Menu. 
The menus have a hierarchical structure, with a main menu that 
is divided into submenus, which are further divided into other 
submenus. For each adjustment and setting procedure, refer to 
respective sections in this manual.
Use the Point ▲▼ buttons to highlight or select a main menu 
item. Press the Point ► or the SELECT...

6

Basic Operation
For detailed functions of each menu, see “Menu Tree” on pages 73-75.
Input 1                                                RGB(PC analog)
Input 2                                                RGB
Input 3                                                Video
Network                                              
System                                               Auto








Main MenuSub-Menu


 Image select
 For computer source, used to select an image level among...

7

The following lens operation can be made with the Lens button on 
the side control. 
Press the LENS button to enter each lens operation mode. The 
selected adjustment display appears on the screen.
Display Lens shift on the screen. Use the Point ▲▼◄► 
buttons to position the screen to the desired point without having 
picture distortion. 
The screen can be moved up or down to 50 percent, or sideways 
up to 10 percent from the central axis of the lens shift.
Press and hold the LENS SHIFT button...



VOLUME + button
VOLUME – button
MUTE (Point ▼) button
Side Control
Basic Operation
1

Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Sound. Press the Point ► or 
the SELECT button to access the submenu items. 
Press the VOLUME+/– buttons on the side control or on the 
remote control to adjust the volume. The volume dialog box 
appears on the screen for a few seconds.
Press the MUTE (Point ▼) button on the remote control to select 
On to...

9

Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons enables you to 
make the desired operation quickly without calling up the On-Screen Menu\
.
Press the ZOOM buttons on the remote control to zoom in and out 
the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust focus of 
the image.
FOCUS buttons
See page 27 for details.
LENS SHIFT button
Remote Control
D .ZOOM button
SHUTTER button
AUTO PCbutton
ZOOM buttons...

0

Press the FREEZE button on the remote control to freeze the 
picture on the screen. To cancel the FREEZE function, press the 
FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than five seconds to 
operate electrically operated filter to replace the filter.
Remote Control
POINTER button
FILTER button
Note:
See 	the 	previous 	page 	for 	the 	description 	of	
other	buttons....