Sanyo Plc Xm100l Projector User Manual

41

Computer Input
Image adjust MenuPress the MENU button to display the On-Screen Menu. 
Use the Point ▲▼ buttons to select Image adjust and 
then press the Point ► or the SELECT button.
1
Use the Point ▲▼ buttons to select the desired item 
and then press the SELECT button to display the 
adjustment dialog box. Use the Point ◄► buttons to 
adjust the setting value.
Note:
 When	White	balance	Red,	Green	or	Blue	is		
		adjusted,	
Color temp. 	will	change	to	adj..
Press the Point ◄ button to...

4

Select the desired screen size that conforms to the input 
signal source.
SCREEN MENU
Provide the image at the normal computer aspect ratio of 4:3.
Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
Provide the image to fit the...

4

Provides the full screen image.
Computer Input
Adjust the screen scale and position manually with this function.
Press the Point ►button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
 Scale H/V .............  Adjust the Horizontal/Vertical screen scale.
 H&V  ......................  When set to On, the aspect ratio is fixed. 
Scale V appears dimmed and becomes 
unavailable. Adjust Scale H, then the screen 
scale is...

44

Computer Input
This function is used to adjust keystone distortion of the  projected 
image. Use the Point ▲▼ buttons to choose the item you want to 
adjust.Keystone
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling 
Rear 
When this function is set to On, the picture will be top/bottom and 
left/right reversed. This function is used to project the image from...

45

If the projector cannot reproduce proper video image, select a 
specific broadcast signal format from among PAL, SECAM, NTSC, 
NTSC 4 .4
, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal, and 
adjusts itself to optimize its performance.
When the Video System is  105i or 100i, select the system 
manually.
If the projector cannot reproduce proper video image, select a 
specific component video signal format from among  40i, 575i, 
40p
, 575p,...

46

Normal picture level preset on the projector.
Picture level adjusted with fine tone.
User preset picture adjustment in the Image adjust Menu. (p.48)
Video Input
StandardCinemaImage 1Image 2Image 3Image 4Image 5Image 6Image 7Image 8Image 9Image 10
Image select Menu
1

Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Image select and then press 
the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired item and 
then press the SELECT...

47

1

Press the Point ◄ button to decrease the contrast; press the Point 
► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press  the 
Point ► button to increase the brightness (from 0 to 63).
Press the Point ◄ button to lighten red tone; press the Point ► 
button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press the Point ► 
button to deepen green tone (from 0 to 63).
Press  the  Point  ◄  button  to...

4

Use  the  Point  ◄►  buttons  to  adjust  the  gamma  value  to  obtain  a 
better balance of contrast (from 0 to 15).
Press the Point ◄ button to decrease the sharpness of the image; 
press the Point ► button to increase the sharpness of the image 
(from 0 to 31).
An interlaced video signal can be displayed in progressive mode. 
Press the Point ◄► buttons to change the progressive scan mode.
 Off ...........  Progressive scan mode is Off.
 On  ...........  Progressive scan mode is  On .
 Film...

49

Note:
	 •	 When	no	signal	 is	detected,	Normal 	is	 set	 automatically	
and	the	 Aspect	dialog	box	disappears.
	 •	 The	adjustable	range	for	Scale	H/V	and	Position	H/V	 are	limited	depending	on	the	input	signal.
	 •	 Wide	cannot	be	operated	when	
720p ,	1035i ,	1080i  or	1080p  is	selected	on	 AV	System	Menu	(p.45).
Video Input
Custom
1

Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Screen and then press the 
Point ► or the SELECT button
Use the Point...

50

Video Input
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling 
Rear 
When this function is set to On, the picture will be top/bottom and 
left/right reversed. This function is used to project the image from a 
ceiling-mounted projector.
When this function is set to On, the picture will be left/right 
reversed. This function is used to project the image from...