Sanyo Pdg Dwt50l Projector User Manual

4. Convenient Features 
52
4.  The PIN code window is displayed. Enter a 
PIN code between 4 and 10 characters using 
▲▼◄►. The PIN code characters change 
to “ *”. Press Select
. 
 
5.  Once a successful PIN code is entered, a 
confirmation screen is displayed. Enter the 
same password as the previous step and 
write it down for later reference. Press  
Select. A security activation message is dis-
played. Select Cancel  to return to the 
Setting  menu or select  OK to enable secu-
rity. 
 
  CAUTION...

4. Convenient Features 
53 
 
Unlocking the Projector  
To unlock the projector, refer to the following guide. 
1. When the projector is locked, either by re-
quest during operation or at start up, the 
locked message is displayed. 
 
2. To unlock the projector, press Menu on the 
control panel or remote control. The PIN 
code window is displayed. Enter the previ-
ously defined PIN code to activate the 
projector. 
 
  

4. Convenient Features 
54
 
u Using the Physical Lock 
For security and authorized usage, the projector comes with tw o types of security features, the Kensington Lock and the 
Security Chain Lock. 
Using the Kensington Lock 
If you are concerned about security, attach the projector to a permanent object with the  
Kensington slot and a security cable.  
 
 
 
 
Using the Security Chain Lock 
In addition to the password protection function and the Kensington lock, the security chain opening helps...

 
55 
5. Using On-Screen Display 
n Using the Menus 
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control or the buttons on the top of  the projector to navigate and make changes to the OSD. The 
following illustration shows the corresponding buttons  on the remote control and on the projector. 
 
 
 
1.  To open the OSD, press the  Menu but-
ton on the OSD control panel or remote 
control....

5. Using On-Screen Display 
56
2.  Press the cursor ◄ or ► button to 
move through secondary menus. 
 
3.  Press  ▲or▼ to select menu items and 
◄or ► to change values for settings. 
Press  Select  to confirm the new setting. 
 
4.  Press Cancel  to close the OSD or leave 
a submenu.  
  

5. Using On-Screen Display 
57 
 
o Menu Tree 
         The gray shaded areas indicate factory default settings. 
MENU   ITEM 
Input   Computer 1, Computer 2, Computer 3, Component, Video, S-Video 
   Test pattern  CrossHatch, Raster(0%), Raster(25%), Raste
r(50%), Raster(100%), Raster Red, Raster 
Green, Raster Blue, Raster Blue 60, Gray  Raster 10, Gray Raster 30, Ramp H, Ramp V, 
Red Ramp H 
Adjust Image  Image select High-bright/Presentation/Video/Movie/Graphic/sRGB 
   Detail setting  Basic...

5. Using On-Screen Display 
58
 
MENU  ITEM 
 
Installation Ceiling & Rear Desktop Front/Ceiling Rear/Desktop Rear/Ceiling Front 
   Communication speed 4800bps/9600bps/19200bps/38400bps 
  Menu color select Color/Monochrome 
   Display time Manual/Auto 5sec/Auto 15sec/Auto 45sec 
   Background Blue/Black/Logo 
  PIN code lock Off/On 
   Key lock Off/On 
   Dynamic black Off/On 
   RC sensor Both, Front, Back 
   Network setting  DHCP Enable/Disable 
    IP address 
    Subnet 
    Gateway 
    DNS...

5. Using On-Screen Display 
59 
 
p Menu Elements 
Some menus and windows contain large amounts of information  in a small area. Refer to the following guide to navigate 
through options more easily. 
 
Menu windows or dialog windows typically  contain the following elements: 
LABEL ITEM DESCRIPTION 
1 Title  Indicates the menu title. 
2 Highlight  Indicates the selected menu or item. 
3 Menu type  Advanced Menu or Basic Menu. 
4 Radio button  Click this round button to select an option in a dialog box....

5. Using On-Screen Display 
60
 
q Source Menu Descriptions and Functions 
The Source menu displays all supported image sources. 
 
Select the required source from the menu using  ▲ or  ▼ and press  Select to confirm. 
ITEM DESCRIPTION 
Computer 1  Select the source connected to the Computer 1 input 
(see Connecting Your PC or Macintosh Computer on page 
26). 
Computer 2 Select the source connected to the Computer 2 input 
(see Connecting Your PC or Macintosh Computer on page 
26). 
Computer 3 Select the...

5. Using On-Screen Display 
61 
 
r Adjust Menu Descriptions and Functions 
The Adjust menu contains overall projector settings for image output such as sharpness, overscan and color matrix. 
Three tabs are accessible through the Adju st menu, Picture, Image Options and Video. 
Image menu 
The image menu is used to alter picture settings and can be accessed fro\
m the Adjust menu. 
 
The following table lists all functions with a description and the defau\
lt setting. 
ITEM DESCRIPTION 
Image select...