Sanyo Pdg Dwt50l Projector User Manual

5. Using On-Screen Display 
62
Image options menu 
The Image Options menu is used to configure image options such as screen positioning and aspect ratio. Access the im-
age options menu in the Adjust menu. 
 
The following table lists all functions with a description and the defau\
lt setting. 
ITEM DESCRIPTION 
Screen  Select Screen using ◄or► from the list (see page 63). 
Overscan  Set the Overscan value using  ◄or► (see page  63). 
PC adj.  Adjust the position values using the slides. 
Horizontal:...

5. Using On-Screen Display 
63 
Screen 
The screen option allows for the adjustment of the aspect ratio to alter the appearance or ratio of the projected image.  
 
4:3 – Standard TV screen (4:3), proportionally four units wide for  every three units high, no matter the size of the screen. 
16:9 – A wide-screen aspect ratio for video. 
15:9 – Uses the full display. 
Letterbox  – Reduce image to display the true aspect with black borders on top \
and bottom. 
True  – Displays the current image in its true...

5. Using On-Screen Display 
64
Video menu 
The Video menu is used to configure image options such as film. Access the Video menu in the Adjust menu. 
 
The following table lists all functions with a description and  the default setting. A detailed description follows the table. 
ITEM DESCRIPTION 
Noise reduction Select Noise reduction mode (see page  65). 
3D Y/C separation Select 3D Y/C separation mode (see page  65). 
Progressive 
Select Progressive mode (see page  65). 
Color matrix Select Color...

5. Using On-Screen Display 
65 
 
Noise reduction 
Select the level of noise reduction required. 
 
Range: Off, Low, Mid, High. 
 
3D Y/C separation 
3D Y/C Separation separates composite signal to Y (bri ghtness) signal and C (color) signal, and can help to produce 
clearer and sharper images without overlapping colors (rainbow effect). 
 
Set 3D Y/C Separation On or Off. 
 
Progressive 
Progressive converts an interlaced image to a progressive scan image. 
 
Select the form of Deinterlacing required...

5. Using On-Screen Display 
66
 
Color matrix 
Color Matrices define the amount of the three-color components R (red), G (green), and B (blue) in a single point in color 
space. 
 
Select from the following: 
Auto  – Auto selects the color matrix. 
RGB  – Sets the color matrix to RGB, us e for PC monitor or camera imaging. 
SDTV  – Sets the color matrix to SDTV, use for Standard Definition imaging\
. 
HDTV  – Sets the color matrix to HDTV, use for High Definition imaging. 
 
Film 
Film aids in converting...

5. Using On-Screen Display 
67 
 
s Detail Settings Menu Descriptions and Functions 
The Detail settings menu contains basic and advanced color adjustment options such as gamma correction, color contrast 
and color correction.  
Basic 
The Basic tab contains general Detail Settings such as gamma  correction and color temperature. Access to the General 
tab is through the Detail Settings menu. 
 
The following table lists all functions with a brief description. 
ITEM DESCRIPTION 
Reference  Set Reference...

5. Using On-Screen Display 
68
 
Reference 
The Reference mode allows the projector to differentiate between source materials for example movies, PC images or 
video stills. 
 
Select from the following: 
High-bright  – Select for use in a brightly lit room. 
Presentation – Select if the projector is  to be used for presentation purposes. 
Video  – Select for video projection. 
Movie  – Select for Movie projection. 
Graphic  – Select Graphic for still images. 
sRGB  – Select for projecting PC or web page...

5. Using On-Screen Display 
69 
 
White balance 
White Balance allows the projector to compensate for different  colors of light being emitted by different light sources. 
 
The following table lists all functions with a brief description. 
ITEM DESCRIPTION 
Red  Set the value to compensate for red light sources. 
Green  Set the value to compensate for green light sources. 
Blue Set the value to compensate for blue light sources. 
Contrast R  Set the Contrast R value to compensate for red light sources....

5. Using On-Screen Display 
70
 
Color correction 
The Color correction tab enables the adjustment of color values in an image to remove unwanted effects, improve color, 
characteristics or add more of a particular color. 
 
The following table lists all functions with a brief description. 
ITEM DESCRIPTION 
Red  Increase or decrease the amount of red in the projected output using  ◄ and ►. 
Green  Increase or decrease the amount of green in the projected output using  ◄ and ►. 
Blue  Increase or...

5. Using On-Screen Display 
71 
 
t Setting Menu Descriptions and Functions 
The Setup menus contain the most often used settings during installation and options to cu stomize the general output of 
the projector. Three tabs are accessible thr ough the Setup menu, general, installation and option. 
Basic 
The Basic  tab contains general setup options such as la mp mode and OSD language settings and can be accessed with 
the projector control panel or with the remote control unit. 
 
The following table...