Sanyo Pdg Dwt50l Projector User Manual

1. Introduction 
2
o Introduction to the Projector 
Features you’ll enjoy:
 
DLP projector with high resolution 
The combination of BrilliantColor™ and a six-segment colo r wheel (optional) offer a more true color reproduction. 
Installation Flexibility 
This projector has many useful functions such as powered lens shifting, ceiling and  rear projection, variety of extensive op-
tional powered lens with bayonet m ount with release button, etc. 
Multiple Interface Terminals 
The projector has several...

1. Introduction 
3 
p Part Names of the Projector 
Front-right view
 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  IR receiver  Receiver for IR signal from remote control 11 
2.  Lamp cover Remove cover to replace lamp or color wheel 99 
3.  Lens control panel  See Lens Controls 6 
4.  OSD control panel  See OSD Controls and Status LEDS 7 
5.  I/O connector panel  Connect various input devices 9 
6.  Intake vent Lamp cooling vent – do not obstruct — 
7.  Speakers  Built-in stereo speakers — 
8.  Height...

1. Introduction 
4
Top view 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  Lens control panel See Lens Controls 6 
2.  Right-hand speaker  Right-hand speaker — 
3.  Lamp cover Remove cover to replace lamp or color wheel 99 
4.  Exhaust vent Exhaust vent – do not obstruct — 
5.  OSD control panel See OSD Controls and Status LEDS 7 
6.  Rear intake vent  Rear cooling intake – do not obstruct — 
7.  Left intake vent  Left-hand cooling intake – do not obstruct — 
8.  Left-hand speaker  Left-hand speaker — 
  

1. Introduction 
5 
 
Bottom view 
 
ITEM LABEL DESCRIPTION SEE PAGES: 
1.  Height adjusters  Adjust projection height 38 
2.  Intake vent Color wheel cooling vent – do not obstruct — 
3.  Front filter  Keep the fan free of dust – clean regularly for optimum perform-
ance 95 
4.  Ceiling support holes Contact your dealer for information on mounting the projector on 
a ceiling — 
5.  Security chain  
opening Attach anti-theft device – see 
u Using the Physical Lock 54 
6.  Rear filter 
7.  Side filter...

1. Introduction 
6
q Top Features 
Lens Controls
 
 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  ZOOM  Increase/decrease projected image size 44 
2.  UP CURSOR 
3.  RIGHT CURSOR 
4.  DOWN CURSOR 
5.  LEFT CURSOR  Move image left, right, up, or down 
6.  FOCUS 
Focus the projected image 44  

1. Introduction 
7 
OSD Controls and Status LEDs 
 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  MENU  Open / Close the OSD 55 
2.  UP/ DOWN/ LEFT/ 
RIGHT BUTTONS Navigate and change settings in the OSD 55 
3.  
RIGHT CURSOR/ 
VOLUME 
INCREASE Increase volume 
40 
4.  CANCEL 
Exit the On-Screen Display (OSD) 55 
5.  INPUT 
Change or select the input device 34 
6.  ON/STAND-BY Turn the projector on or off (main power switch must be turned 
on first). 
Press to place the projector in standby mode. 32 
7.  LAMP...

1. Introduction 
8
ITEM LABEL DESCRIPTION SEE PAGE: 
8.  LAMP 1 (LED) See Indicator Messages 102 
9.  WARNING (LED)  See Indicator Messages 102 
10.  POWER (LED) See Indicator Messages 102 
11.  AUTO PC ADJ.  Optimize image size, position, and resolution 39 
12.  SELECT Select or change settings in the OSD 55 
13.  
LEFT 
CURSOR/VOLUME 
DECREASE  Decrease volume 
40 
  

1. Introduction 
9 
 
r Terminal Panel Features 
 
ITEM LABEL DESCRIPTION SEE PAGE: 
1.  COMPUTER 3 IN  Connect the DVI-D cable (not supplied) from a computer 26 
2.  AUDIO IN 
(COMPUTER 3)  Connect the audio cable (not supplied) from the input device — 
3.  AUDIO OUT  Audio loop-thru — 
4.  MONITOR OUT  Connect to a monitor — 
5.  R/C JACK 
Connect the remote to the projector 15 
6.  AUDIO IN 
(COMPUTER 2) Connect the audio cable (not supplied) from the input device — 
7.  
AUDIO IN 
[L(MONO)/R]...

1. Introduction 
10
 
ITEM LABEL DESCRIPTION SEE PAGE: 
10.  SCREEN 
TRIGGER When connected to the screen 
through a commercially available 
cable, the scr een deploy

s automatically on start up of the projec-
tor. The screen retracts when the projector is powered off  
(see notes below) 
117 
11.  S-VIDEO  Connect a commercially available S-video cable from a video 
device 30
12.  POWER SWITCH 
Turn on/off the projector 32,41 
13.  AC IN Connect the supplied power cable 31 
14.  
AUDIO IN 
[L(MONO)/R]...

1. Introduction 
11 
 
s Part Names of the Remote Control 
ITEM LABEL LABEL ITEM 
1.   ON  NO SHOW Temporarily turns off screen 
image. 15.  
2.  
STAND-BY  D. ZOOM -/+ Zoom in/out function. 16.  
3.  
LIGHT Illuminate the remote panel.  AUTO PC Automatically adjust the 
computer image. 17.  
4.  
MENU Open or close the on-Screen 
menu.
  KEYSTONE Correct keystone distortion. 18.  
5.  
CANCEL VOLUME 
-/+ 
19.  
6.  VOLUME - 
COMPUTER 1 
20.  
7.  SELECT Executes a selected menu 
item
  COMPUTER 2 
21....