Samsung 7000 Led Tv User Manual

							31English
04Advanced FeaturesNetwork Setup (Auto)
Use the Automatic Network Setup when connecting your 
TV to a network that supports DHCP. To set up your TV’s 
cable network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the 
previous section.
2.  Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select Setup, and 
then press the ENTER
E button.
3.  Use the ▲ or ▼ button to select Network in the Setup 
menu, and then press the ENTER
E button. The 
Network screen appears.
4.  On the Network screen, select Network Type.
5.  Set Network Type to Wired.
6.  Select Network Setup. The Network Setup screen 
appears.
7.  Set Internet Protocol Setup to Auto. 
8.  Auto acquires and enters the needed Internet values 
automatically.
9.  Wait two minutes, and then press the RETURN button 
on your remote.
10.  If the Network Function has not acquired the network 
connection values, go to the directions for Manual.
Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to 
a network that requires a Static IP address. 
Getting the Network Connection Values
To get the Network connection values on most Windows 
computers, follow these steps:
1. Right click the Network icon on the bottom right of the 
screen.
2.  In the pop-up menu that appears, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support Tab, click the Details button. The 
Network connection values are displayed.
How to set up manually
To set up your TV’s cable network connection manually, 
follow these steps: 
1.  Follow Steps 1 through 6 in the “How to set up 
automatically” procedure.
2.  Set Internet Protocol Setup to Manual.
3.  Press the ▼ button on your remote to go to the first 
entry field.
4.  Enter the IP Address, Subnet Mask, Gateway, and 
DNS Server values. Use the number buttons on your 
remote to enter numbers and the arrow buttons to move 
from one entry field to another.
5.  When done, press the RETURN button on your remote.
6.  Select Network Test to check the Internet connectivity.
Network Setup
IP Address   :       
Subnet Mask  :       
Gateway  :       
DNS  : Auto
DNS Server   : 
      
U Move    E Enter    R Return
Internet Protocol Setup  : Auto ►
Network
U Move    E Enter    R Return
Network Type   : Wired ►
Network Setup 
Network Test
SWL (Samsung Wireless Link)  : Off
SWL connect 
[UC7000_NA]BN68-02627A-06L03.indb   312010-06-25   오전 9:27:29 
						

							32English
Advanced Features
 
¦ Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter 
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration 
below.
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung 
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G \
connection, the video may not play smoothly.
 
✎NOTE
 
xYou must use the “Samsung Wireless L AN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless 
network. 
 
xSamsung’s Wireless L AN Adapter is sold separately. The SAMSUNG Wireless L AN Adapter is offered by select 
retailers, Ecommerce sites and Samsungparts.com. 
 
xTo use a wireless network, your T V must connect wirelessly to a wireless IP sharer (either a router or a modem). If the 
wireless IP sharer supports DHCP, your T V can use a DHCP or static IP address to connect to the wireless network. 
 
xSelect a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer 
is currently being used by another device nearby, this will result in interference and communication failure. 
 
xIf you apply a security system other than the systems listed below, it will not work with the T V. 
 
xIf you select the Pure High-throughput (Greenfield) 802.11N mode and set your AP's Security Encryption type to WEP, 
TKIP or TKIPAES (WPS2Mixed), your Samsung T V will not support the connection in compliance with new Wi-Fi 
certification specifications. 
 
xIf your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button 
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in 
either mode.
 
xIf your router, modem, or device isn’t certified, it may not connect to the T V via the “Samsung Wireless L AN Adapter.”
 
xConnection Methods : You can setup the wireless network connection six ways. 
 
– Samsung Auto Configuration - For non-Samsung devices.
 
– PBC (WPS)
 
– Auto Setup (Using the Auto Network Search function)
 
– Manual Setup
 
– SWL (Samsung Wireless Link) - For Samsung devices only.
 
– Ad-Hoc
 
xThe Samsung Wireless L AN Adapter may not be recognized or work properly when connecting via a USB hub or via 
a USB extension cable other than the one available from Samsung.
 
✎To use the  SWL (Samsung Wireless Link)  function, connect to the USB 1 (HDD) port.
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
or
Wireless IP Sharer
(AP having DHCP Server)
Samsung WirelessLAN Adapter
[UC7000_NA]BN68-02627A-06L03.indb   322010-06-25   오전 9:27:30 
						

							33English
04Advanced Features
Network Setup (Samsung Auto 
Configuration)
The Samsung Auto Configuration function lets you connect 
your Samsung TV automatically to non-Samsung wireless 
APs. If your non-Samsung AP does not support Samsung 
Auto Configuration, you must connect using one of the 
other methods: PBC (WPS), auto configuration, or manual 
configuration.
 
✎To use this function, you must set SWL (Samsung 
Wireless Link) to Off in the T V’s on-screen menu.
 
✎You can check for equipment that supports Samsung 
Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1.  Place the AP and TV next to each other and turn them 
on.
 
✎Because AP booting times vary, you may have 
to wait approximately two minutes for your AP to 
boot up.
 
✎Ensure the L AN cable is connected to the 
WAN port of the AP during Samsung Auto 
Configuration. If it is not connected, Samsung 
Auto Configuration only confirms that the T V is 
connected to the AP, but does not confirm it is 
connected to the Internet. 2. 
After 2 minutes, connect the Samsung Wireless LAN 
Adapter to the TV. When the Samsung Wireless LAN 
Adapter establishes a connection with your TV, a pop-up 
window appears.
3.  As soon as a connection is established, place the AP 
parallel to the Samsung Wireless LAN Adapter and not 
farther than 9 and 7/8s inches (25cm) from it.
4.  Wait until the connection is automatically established. 
 
✎If Samsung Auto Configuration does not connect 
your T V to your AP, a pop-up window appears on 
the screen notifying you of the failure. If you want 
to try using Samsung Auto Configuration again, 
reset the AP, disconnect the Samsung Wireless 
L AN Adapter and then try again from Step 1. You 
can also choose one of the other connection 
setup methods: PBC (WPS), auto, or manual.
5.  Place the AP in a desired location.
 
✎If the AP settings change or you install a new 
AP, you must perform the Samsung Auto  
Configuration procedure again, beginning from 
Step 1.
Notice
The picture may appear corrupted or have static for some channels when the TV is c\
onnected to the Samsung Wireless LAN 
Adapter. In such a case, establish a connection using one of the following meth\
ods or connect the Samsung Wireless LAN 
Adapter using a USB cable in a place that is not affected by radio interference.
Method 1 Method 2
Connect using the USB right angle adapter Connect via an extension cable
To connect the Samsung Wireless LAN Adapter using the USB 
right angle adapter, follow these steps:
1. Connect the USB right angle adapter to the Samsung 
Wireless LAN Adapter.
2.  Connect the other end of the right angle adapter to the USB 
1 (HDD) port. To reconnect the Samsung Wireless LAN Adapter using 
the extension cable, follow these steps:
 
✎The Samsung Wireless L AN Adapter should be 
installed in an interference-free area in order to 
avoid interference between the adapter and tuner.
1.  Connect the extension cable to the USB 1 (HDD) 
port.
2.  Connect the extension cable and Samsung Wireless 
LAN Adapter.
3.  Attach the Samsung Wireless LAN Adapter to the 
back of the TV near the top, using double-sided 
adhesive tape.
or
[UC7000_NA]BN68-02627A-06L03.indb   332010-06-25   오전 9:27:31 
						

							34English
Advanced Features
Network Setup (PBC (WPS))
How to set up using PBC (WPS)
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to Samsung Wireless LAN Adapter as 
described in the previous section.
2.  Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select Setup, and 
then press the ENTER
E button.
3.  Use the ▲ or ▼ button to select Network in the Setup 
menu, and then press the ENTER
E button.
4.  On the Network screen, select Network Type.
5.  Set Network Type to Wireless.
6.  Select Network Setup. The Network Setup screen 
appears.
7.  Press the Red button on your remote.
8.  Press the PBC (WPS) button on your router within 2 
minutes. Your TV player automatically acquires all the 
network setting values it needs and connects to your 
network.
9.  After the network connection is set up, press the 
RETURN button to exit the Network Setup screen.
Network Setup (Auto)
Most wireless networks have an optional security system 
that requires devices that access the network to transmit 
an encrypted security code called an Access or Security 
Key. The Security Key is based on a Pass Phrase, typically 
a word or a series of letters and numbers of a specified 
length you were asked to enter when you set up security for 
your wireless network.  If you use this method of setting up 
the network connection, and have a Security Key for your 
wireless network, you will have to enter the Pass Phrase 
during the setup process.
How to set up automatically
To set up the wireless connection automatically, follow these 
steps:
1. Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” procedure.
2.  Press the ▼ button to select Internet Protocol Setup, 
and then press the ENTER
E button. Press the ▲ or 
▼ button to select Auto, and then press the ENTERE 
button.
3.  Press the ▲ button to go to Select a Network, and 
then press the ENTER
E button. The Network function 
searches for available wireless networks. When done, it 
displays a list of the available networks.
4.  In the list of networks, press the ▲ or ▼ button to select 
a network, and then press the ENTER
E button.
 
✎If the AP is set to Hidden (Invisible), you have 
to select Add Network and enter the correct 
Network Name (SSID) and Security Key to 
establish the connection.
5.  If the Security/PIN pop-up appears, go to Step 6. If the 
Network Connecting Screen appears, go to Step 10.
6.  Press the ▲ or ▼ button to select Security or PIN. For 
most home networks, you would select Security (for 
Security Key). The Security Screen appears.
7.  On the Security screen, enter your network’s Pass 
Phrase. 
 
✎You should be able to find the Pass Phrase on 
one of the set up screens you used to set up your 
router or modem.
8.  To enter the Pass Phrase, follow these general 
directions:
 
– Press the number buttons on your remote to enter 
numbers.
 
– Use the direction buttons on your remote to move 
from button to button on the Security Key screen.
 
– Press the Red button to change case or display 
symbols/characters.
 
– To a enter letter or symbol, move to the letter or 
symbol, and then press the ENTER
E button.
 
– To delete the last letter or number you entered, press 
the Green button on your remote.
Network Setup
 PBC(WPS)    U Move    E Enter    R Return
Select a Network   : Not Selected ►
Internet Protocol Setup   : Auto 
IP Address   : 
      
Subnet Mask  :       
Gateway  :       
DNS  : Auto
DNS Server   : 
      
ABCDEFG
HIJKLMN
OPQRSTU
VWXYZ
0~9
Network Setup
n Move    E Enter    R Return
Security Key
0 enteredNumber
 
 Lower case
 
B Delete
 
 Space
[UC7000_NA]BN68-02627A-06L03.indb   342010-06-25   오전 9:27:32 
						

							35English
04Advanced Features9. When done, press the Blue button on your remote. The 
Network Connecting screen appears.
10.  Wait until the connection confirmation message is 
displayed, and then press the ENTER
E button. The 
Network Setup screen re-appears.
11.  To test the connection, press the RETURN button to 
select Network Test, and then press the ENTER
E 
button.
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point 
through the “Samsung Wireless LAN Adapter” by using a 
peer to peer network.
 
✎This function is available when SWL (Samsung 
Wireless Link) is set to Off in the T V’s on-screen 
menu.
How to connect to new Ad-hoc device
1.  Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 34). 
2.  Choose Select a Network. A list of devices/networks 
appears. 
3.  While in the device list, press the Blue button on the 
remote.
 
✎The message Ad-hoc is a direct Wi-Fi 
connection with cell phone or PC. The existing 
network system may have limited functionality. 
Do you want to change the network 
connection? is displayed.
4.  Input the generated Network Name (SSID) and 
Security Key into the device you want to connect.
How to connect an existing Ad-hoc device
1.  Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 34). 
2.  Choose Select a Network. The Device/Network list 
appears. 
3.  Select the device you want in the Device list. 
4.  If security key is required, input the security key.
 
✎If network doesn’t operate normally, check 
the Network Name (SSID) and Security Key 
again. An incorrect Security Key may cause a 
malfunction.
Network Setup (Manual)
If the other methods do not work, you need to enter the 
Network setting values manually.
Getting the Network Connection Values
To get the Network connection values on most Windows 
computers, follow these steps:
1.  Right click the Network icon on the bottom right of the 
screen.
2.  In the pop-up menu, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support tab, click the Details button. The 
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow 
these steps:
1.  Follow Steps 1 through 6 in the “How to set up using 
PBC (WPS)” (p. 34).
2.  Press the ▼ button to select Internet Protocol Setup, 
and then press the ENTER
E button. Press the ▲ 
or ▼ button to select Manual, and then press the 
ENTER
E button.
3.  Press the ▼ button to go to the first entry field (IP 
Address).
4.  Use the number buttons to enter numbers.
5.  When done with each field, use the ► button to move 
successively to the next field. You can also use the other 
arrow buttons to move up, down, and back.
6.  Enter the IP Address, Subnet Mask, and Gateway 
values.
7.  Press the ▲ or ▼ button to go to DNS.
8.  Press the ▼ button to go to the first DNS entry field. 
Enter the numbers as above.
9.  When done, press the ▲ button to go to Select a 
Network. Select your network, and then press the 
ENTER
E button.
10.  Go to Step 4 in the “How to set up automatically” (p. 
34), and follow the directions from that point on.
[UC7000_NA]BN68-02627A-06L03.indb   352010-06-25   오전 9:27:33 
						

							36English
Advanced Features
SWL (Samsung Wireless Link)
This function lets you connect your TV to a Samsung device 
(router, etc.) that supports PBC (WPS) . You can connect the 
TV to the device even if a sharer is not connected to the TV.
 
✎For the T V to use Internet@T V, the AP (access point) 
must be connected to the wireless network.
 
✎If a Samsung Wireless Lan Adapter is connected to the 
USB 2 port, the network may not operate normally. We 
recommend connecting it to the USB 1 (HDD) port.
 
✎Only sharers using the 2.4 Ghz band are supported. 
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that 
supports PBC (WPS).
 
✎This function is available when SWL (Samsung 
Wireless Link) is set to On .
 
✎To use the SWL (Samsung Wireless Link) function, 
connect the Samsung Wireless L AN Adpater to the 
USB 1 (HDD) port.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1.  Follow Steps 1 through 5 in the “How to set up using 
PBC (WPS)” (p. 34).
2.  Select SWL(Samsung Wireless Link) by using the ▼ 
button, and then press the ENTER
E button to turn it 
On.
3.  Select SWL connect by using the ▼ button, and then 
press the ENTER
E button.
4.  If the “Press the PBC button on the PBC(WPS) 
supported device to connect within 120 seconds.” 
message appears, press the PBC button on the device 
to connect.
 
✎For more information, refer to the wireless network 
setup manual of the device to be connected. 
5.  If the TV connects properly to the device after the count 
in the message box starts, then the message box 
disappears automatically.
 
✎If the connection fails, please retry after 2 minutes.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet 
because your ISP has permanently registered the 
MAC address (a unique identifying number) of your 
PC or modem, which it then authenticates each time 
you connect to the Internet as a way of preventing 
unauthorized access. As your TV has a different MAC 
address, your ISP can not authenticate its MAC address, 
and your TV can not connect.
To resolve this problem, ask your ISP about the 
procedures required to connect devices other than a PC 
(such as your TV) to the Internet.
If your Internet service provider requires an ID or 
password to connect to the Internet, your TV may not 
be able to connect to the Internet. If this is the case, you 
must enter your ID or password when connecting to the 
Internet.
The internet connection may fail because of a firewall 
problem. If this is the case, contact your Internet service 
provider. 
If you cannot connect to the Internet even after you 
have followed the procedures of your Internet service 
provider, please contact Samsung Electronics at 
1-800-SAMSUNG.
[UC7000_NA]BN68-02627A-06L03.indb   362010-06-25   오전 9:27:33 
						

							37 English 
04 Advanced Features   Media Play  
 
¦   Connecting a USB Device  
  1.  Turn on your TV. 
 2.  Connect a USB device containing photo, music and/or movie fi les to the   USB 1 
(HDD)  or   USB 2  port on the back or side panel of the TV. 
 3.  When USB is connected to the TV, a popup window appears. Then you can 
select   Media Play .  
 
✎If an external USB device connected to the T V’s USB port draws an excessive 
amount of current from the port, the message “USB Power overload” appears 
on the screen. This is not a problem with the T V, which provides the standard 
current from its USB ports, but a problem with the external device. Please 
contact the manufacturerof the device for support.
 
¦   Connecting to your PC through a network  
  You can play pictures, music and videos saved on your PC through a network connection in the   Media Play  mode.   
 
✎  If you want to use   Media Play  to play files saved on your PC over your T V, you should download “PC Share Manager” 
and the users manual from “www.samsung.com.”  
  1.  For more information on how to confi gure your network, refer to “Network Connection” (p. 30).  
 
–   You are recommended to locate both the TV and the PC in same subnet. The fi rst 3 parts of the subnet address of the 
TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP 
Address: 123.456.789.**)  
  2.  Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager 
Program will be installed.  
 
–   You can connect the TV to the PC directly without connecting it through a Sharer (Router).  
  LAN Cable (Not Supplied)  
  LAN Cable (Not Supplied)  
  LAN Cable (Not Supplied)  
  LAN Adapter 
(Supplied)  
  Modem Cable (Not Supplied)    LAN Cable (Not Supplied)  
  PC  
  External Modem 
 (ADSL/VDSL/Cable TV)  
  LAN  
  Samsung Wireless 
 LAN Adapter  
  Wireless IP Sharer     TV Rear Panel  
  or  
MEDIA.P  Enjoy photos, music and/or movie fi les saved on 
a USB Mass Storage Class (MSC) device.  
 
O    MENU  m    →    Application    →   Content 
View    →   Media Play    →   ENTER  E   
  USB Drive  
  TV Rear Panel  
  or  
SUM   Change Device  
   View Devices      E   Enter      R   Return  
  MediaPlay  
  Videos  
[UC7000_NA]BN68-02627A-06L03.indb   372010-06-25   오전 9:27:36 
						

							38English
Advanced Features
 
✎Functions that are not supported when connecting to a PC through a network:
 
xThe Background Music and Background Music Setting functions.
 
xSorting files by preference in the Photos , Music, and Videos folders.
 
xThe � (REW) or µ (FF) button while a movie is playing.
 
✎Divx DRM, Multi-audio, embedded captions are not supported.
 
✎Samsung PC Share manager should be permitted by the firewall program on your PC.
 
✎When you use Media Play mode through a network connection, depending on the functions of the provided server:
 
xThe sorting method may vary.
 
xThe scene search function may not be supported.
 
xThe Play Continuously function, which resumes playing of a video, may not be supported.
 
– The Play Continuously function does not support multiple users. (It will have only memorized\
 the point where the 
most recent user stopped playing.)
 
xThe ◄ or ► buttons may not work depending on the content information.
 
xYou may experience file stuttering while playing a video in Media Play \
through a network connection.
 
✎It might not work properly with unlicensed multimedia files.
 
✎Need-to-Know List before using Media Play
 
xMTP (Media Transfer Protocol) is not supported.
 
xThe file system supports FAT16, FAT32 and NTFS.
 
xCertain types of USB Digital camera and audio devices may not be compatible with this T V.
 
xMedia Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only 
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not 
supported). Devices should be connected directly to the T V’s USB port. 
 
xBefore connecting your device to the T V, please back up your files to prevent them from damage or loss of data. 
SAMSUNG is not responsible for any data file damage or data loss.
 
xConnect a USB HDD to the dedicated USB 1 (HDD) port.
 
xDo not disconnect the USB device while it is loading.
 
xThe higher the resolution of the image, the longer it takes to display on the screen.
 
xThe maximum supported JPEG resolution is 15360X8640 pixels.
 
xFor unsupported or corrupted files, the “Not Supported File Format” message is displayed.
 
xIf the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
 
xMP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management 
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and 
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the 
illegal copying of contents, as well as managing billings and settlements.
 
xIf more than 2 PTP devices are connected, you can only use one at a time.
 
xIf more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high 
power (more than 500mA or 5V) may not be supported.
 
xIf an over-power warning message is displayed while you are connecting or using a USB device, the device may not 
be recognized or may malfunction.
 
xIf the T V has been no input during time set in Auto Protection Time , the Screensaver will run.
 
xThe power-saving mode of some external hard disk drives may be released automatically when connected to the T V.
 
xIf a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
 
xIf a USB device connected to the T V is not recognized, the list of files on the device is corrupted or a file in the list is 
not played, connect the USB device to the PC, format the device and check the connection.
 
xIf a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC 
to permanently delete the file.
[UC7000_NA]BN68-02627A-06L03.indb   382010-06-25   오전 9:27:36 
						

							39English
04Advanced Features 
¦ Screen Display
Move to the desired file using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is 
played. 
 
✎Supports the View Devices and Home in Media Play homepage.
 
Videos
Playing Video
1.  Press the ◄ or ► button to select Videos, then press the ENTER
E button in the Media Play menu.
2.  Press the ◄/►/▲/▼ button to select the desired video in the file list.
3.  Press the ENTER
E button or � (Play) button.
 
– The selected file is displayed on the top with its playing time.
 
– If video time information is unknown, play time and progress bar are not displayed.
 
– During video playback, you can search using the ◄ and ► button.
 
✎In this mode, you can enjoy movie clips contained on a Game, 
but you cannot play the Game itself. 
 
y Supported Subtitle Formats
Name File extension Format
MPEG-4 time-based text .ttxtXML
SAMI .smiHTML
SubRip .srtstring-based
SubViewer .substring-based
Micro DVD .sub or .txtstring-based
Information:
You can ascertain the selected 
file name and the number of files  and page.
Sort List Section:
Displays the sorting standard.
 
✎The sorting standard is 
different depending on the 
contents.
Operation Buttons
 Red (Change Device ): Selects a connected device.B Green (Preference ): Sets the file preference. (not supported in Basic view) Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol. Blue (Sorting ): Selects the sort list.T Tools : Displays the option menu.
 
✎Using the � (REW) or µ (FF) button, file list can move to next or previous page. File List Section:
You can confirm the files and 
groups that are sorted by 
category.
Movie 01.avi
00:04:03 / 00:07:38
1/1
SUME Chaptering  L Jump  T Tools  R Return
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Select     Sorting    T Tools
VideosPage
  Change Device
[UC7000_NA]BN68-02627A-06L03.indb   392010-06-25   오전 9:27:37 
						

							40English
Advanced Features
 
y Supported Video Formats
File Extension Container Video Codec ResolutionFrame rate 
(fps) Bit rate 
(Mbps) Audio Codec
*.avi
*.mkv AVI 
MKV Divx 3.11 / 4.x / 5.1 / 6.0
1920x10806 ~ 308
MP3 / AC3 / LPCM / ADPCM / DTS Core
XviD
1920x10806 ~ 308
H.264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*.asf ASFDivx 3.11 / 4.x / 5.1 / 6.0
1920x10806 ~ 308
MP3 / AC3 / LPCM / ADPCM / WMA
XviD
1920x10806 ~ 308
H.264 BP / MP / HP 1920x10806 ~ 3025
MPEG4 SP / ASP 1920x10806 ~ 308
Motion JPEG 800x6006 ~ 30 8
*.wmv ASFWindow Media Video v9 1920x10806 ~ 3025 WMA
*.mp4 MP4 H.264 BP / MP / HP
1920x10806 ~ 3025
 MP3 / ADPCM / AAC
MPEG4 SP / ASP 1920x10806 ~ 308
XVID 1920x10806 ~ 308
*.3gp 3GPP H.264 BP / MP / HP
1920x10806 ~ 3025
ADPCM / AAC / HE-AAC
MPEG4 SP / ASP 1920x10806 ~ 308
*.vro VRO 
VOB MPEG1 
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM
MPEG2 1920x108024 / 25 / 30 30
*.mpg
*.mpeg PS MPEG1
1920x108024 / 25 / 30 30
AC3 / MPEG / LPCM / AAC
MPEG2 1920x108024 / 25 / 30 30
H.264 1920x10806 ~ 3025
*.ts
*.tp
*.trp TS MPEG2
1920x108024 / 25 / 30 30
AC3 / AAC / MP3 / DD+ / 
HE-AAC
H.264
1920x10806 ~ 3025
VC1 1920x10806 ~ 3025
Other Restrictions
 
✎NOTE
 
xIf there are problems with the contents of a codec, the codec will not be supported.
 
xIf the information for a Container is incorrect and the file is in error, the Container will not be able to play 
correctly.
 
xSound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec 
listed in the table above.
 
xIf the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder Audio Decoder
•	 Supports up to H.264, Level 4.1
•	 H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not 
supported.
•	 XVID, MPEG4 SP, ASP :
 
– Below 1280 x 720: 60 frame max
 
– Above 1280 x 720: 30 frame max
•	 GMC 2 over is not supported.
•	 H.263 is not supported.
•	 Only Samsung Techwin MJPEG is supported.  •	
Supports up to WMA 7, 8, 9, STD
•	 WMA 9 PRO does not support 2 channel excess multi channel or 
lossless audio.
•	 WMA sampling rate 22050Hz mono is not supported.
[UC7000_NA]BN68-02627A-06L03.indb   402010-06-25   오전 9:27:38