Samsung 7000 Led Tv User Manual

							11English
02ConnectionsConnecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
 
✎DIGITAL AUDIO OUT (OPTICAL)
 
xWhen a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume 
of both the T V and the system.
 
x5.1 CH (channel) audio is available when the T V is connected to an external device supporting 5.1 CH.
 
xWhen the receiver (home theater) is set to on, you can hear sound output from the T V’s optical jack. When the 
T V is receiving a DT V signal, the T V will send 5.1 CH sound to the home theater receiver. When the source is 
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is 
connected to the T V via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to 
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite 
receiver directly to an amplifier or home theater.
 
✎AUDIO OUT : Connects to the audio input jacks on your amplifier/DVD home theater.
 
xWhen connecting, use the appropriate connector.
 
xWhen an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the T V and adjust the 
volume level with the amplifier’s volume control.
Red White
OPTICAL
WR
R-AUDIO-L
AUDIO IN
Optical Adapter (Supplied)
Audio Cable (Not Supplied)
Optical Cable (Not Supplied)Amplifier / 
DVD home theater
Digital Audio System
[UC7000_NA]BN68-02627A-06L03.indb   112010-06-25   오전 9:27:12 
						

							12English
Connections
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
AUDIO OUT
PC OUT
AUDIO OUT
DVI OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
ModeResolutionHorizontal Frequency 
(KHz) Vertical Frequency 
(Hz) Pixel Clock Frequency
(MHz) Sync Polarity 
(H / V)
IBM 640 x 350
720 x 400 31.469
31.469  70.086
70.087 25.175
28.322+/-
-/+
MAC 640 x 480
832 x 624
1152 x 870 35.000
49.726
68.681  66.667
74.551
75.062 30.240
57.284
100.000  -/-
-/-
-/-
VESA CVT 720 x 576
1152 x 864
1280 x 720
1280 x 960  35.910
53.783
56.456
75.231  59.950
59.959
74.777
74.857 32.750
81.750
95.750
130.000 -/+
-/+
-/+
-/+
VESA DMT 640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024 1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050 31.469 
37.861 
37.500 
37.879 
48.077 
46.875 
48.363 
56.476 
60.023 
67.500 
63.981 
79.976 
45.000
49.702 
62.795 
60.000 
47.712 
55.935 
70.635 
65.290  59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029 
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.95425.175 
31.500 
31.500 
40.000 
50.000 
49.500 
65.000 
75.000 
78.750 
108.000 
108.000 
135.000  74.250
83.500 
106.500 
108.000  85.500 
106.500 
136.750 
146.250  -/-
-/-
-/-
+/+
+/+
+/+ -/-
-/-
+/+
+/+
+/+
+/+
+/+ -/+ 
-/+ 
+/+
+/+ -/+ 
-/+
-/+ 
VESA GTF 1280 x 720 
1280 x 1024 52.500 
74.620  70.000
70.00089.040
128.943  -/+ 
-/-
VESA DMT / DTV CEA 1920 x 1080p
67.500  60.000148.500 +/+
 
✎NOTE
 
xFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
 
xThe interlace mode is not supported.
 
xThe set may operate abnormally if a non-standard video format is selected.
 
xSeparate and Composite modes are supported. SOG(Sync On Green) is not supported.
PC Adapter (Supplied) HDMI to DVI Cable (Not Supplied)D-Sub Cable (Not Supplied)
Audio Cable (Not Supplied)
[UC7000_NA]BN68-02627A-06L03.indb   122010-06-25   오전 9:27:14 
						

							13English
02ConnectionsChanging the Input Source
Source List
Use to select TV or an external input sources 
such as a DVD / Blu-ray player / cable box / 
STB satellite receiver. 
 
OMENUm → Input → Source List → ENTERE
 
■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 / 
HDMI3 / HDMI4 / USB
 
✎You can only choose external devices that 
are connected to the T V. In the Source List , 
connected inputs will be highlighted. 
 
✎In the Source List , PC is always activated.
Edit Name
 
OMENUm → Input → Edit Name → ENTERE
 
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / 
AV Receiver / Game / Camcorder / PC / DVI PC / DVI 
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name 
the device connected to the input jacks to make your 
input source selection easier.
 
✎When a PC with a resolution of 1920 x 1080 @ 60Hz is 
connected to the HDMI IN 1(DVI) port, you should set 
the T V to DVI PC mode under Edit Name .
 
✎When connecting an HDMI/DVI cable to the HDMI IN 
1(DVI) port, you should set the T V to DVI PC or DVI 
Devices mode under Edit Name .
SOURCE
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to 
navigate the menu and select and adjust different functions.
POWERSOURCEON/OFF
PRE-CH
CONTENT
MEDIA.PYAHOO
P.SIZEFAV.CHCC
3D
MUTE
TOOLSINFO
CH LIST
INTERNET@ TV
ABCD
4
1
2
3RETURNEXIT
MENU
1 
MENU button: Displays the main on-screen menu.
2  ENTER
E / Direction button: Move the cursor and 
select an item. Confirm the setting.
3  RETURN button: Returns to the previous menu.
4  EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1MENUmThe main menu options appear on 
the screen:
Picture, Sound, Channel, Setup, 
Input, Application, Support.
2▲ / ▼ Select an icon with the ▲ or ▼ 
button.
3ENTEREPress ENTERE to access the 
sub-menu.
4▲ / ▼ Select the desired submenu with 
the ▲ or ▼ button.
5◄ / ►Adjust the value of an item with the 
◄ or ► button. The adjustment in 
the OSD may differ depending on 
the selected menu.
6ENTER EPress ENTERE to confirm the 
selection.
7EXIT ePress EXIT.
[UC7000_NA]BN68-02627A-06L03.indb   132010-06-25   오전 9:27:15 
						

							14English
Basic Features
 Channel Menu
 
¦ Seeing Channels
Channel List
Add, delete or set Favorite channels and use 
the program guide for digital broadcasts. 
 
OMENUm → Channel → Channel List 
→ ENTER
E
Select a channel in the All Channels, Added 
Channels, Favorite or Programmed screen by 
pressing the ▲ / ▼ and ENTER
E buttons. 
Then you can watch the selected channel.
 
■
All Channels: Shows all currently available channels.
 
■
Added Channels: Shows all added channels.
 
■
* Favorite: Shows all favorite channels.
 
■
Programmed: Shows all currently reserved 
programs.
 
✎Using the color buttons with the Channel List
 
x Red ( Antenna ): Switches to Air or Cable .
 
xB Green ( Zoom): Enlarges or shrinks a channel 
number.
 
x Yellow ( Select): Selects multiple channel lists. 
Select desired channels and press the Yellow button 
to set all the selected channels at the same time. The 
c mark appears to the left of the selected channels. 
 
xk ( Page ): Move to next or previous page.
 
xT ( Tools ): Displays the Channel List option menu. 
(The options menus may differ depending on the 
situation.)
Channel Status Display Icons
Icons Operations
cA channel selected.
*A channel set as a Favorite.
)A reserved Program.
 
¦ Using Favorite Channels
 
OMENUm → Channel → Channel List → ENTERE
Add to Favorite / Delete from Favorite 
t
Set channels you watch frequently as Favorites.
1.  Select a channel and press the TOOLS button. 
2.  Add or delete a channel using the Add to Favorite or 
Delete from Favorite menu respectively.
To show all Favorite channels, click on the 
button shown on the right.
 
¦ Memorizing Channels
 
OMENUm → Channel → ENTERE
Antenna (Air / Cable) t
Before your television can begin memorizing the available 
channels, you must specify the type of signal source that is 
connected to the TV (i.e. an Air or a Cable system).
Auto Program 
 
■ Air: Air antenna signal. 
 
■ Cable: Cable antenna signal. 
 
■ Auto: Air and Cable antenna.
CH LIST
FAV.CH
6   Air6-1   * TV #6
7  Air
8   Air
9   Air
9-1   * TV #9
10   Air
10-1   * TV #10
11-1   * TV #1 1
Air                Antenna    B Zoom     Select    kPage    T Tools
Added Channels
6   Air6-1   * TV #6
7  Air
8   Air
9   Air
9-1   * TV #9
10   Air
10-1   * TV #10
11-1   * TV #1 1
Air                Antenna    B Zoom     Select    kPage    T Tools
Added Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
[UC7000_NA]BN68-02627A-06L03.indb   142010-06-25   오전 9:27:17 
						

							15English
03Basic Features 
✎NOTE 
 
xWhen selecting the Cable T V system: STD , HRC 
and IRC identify various types of cable T V systems. 
Contact your local cable company to identify the 
type of cable system that exists in your particular 
area. At this point, the signal source has been 
selected.
 
xAfter all the available channels are stored, it starts 
to remove scrambled channels. The Auto Program 
menu then reappears.
 
¦ Editing Channels
 
OMENUm → Channel → Channel List → ENTERE
Channel Name Edit 
1.  Select a channel and press the TOOLS button. 
2.  Edit the channel name using the Channel Name Edit 
menu.
 
■ Channel Name Edit (analog channels only): Assign your 
own channel name.
 
¦ Other Features
 
OMENUm → Channel → ENTERE
Clear Scrambled Channel
This function is used to filter out scrambled channels after 
Auto Program is completed. This process may take up to 
20~30 minutes.
How to Stop Searching Scrambled Channels
1.  Press the ENTER
E button to select Stop.
2.  Press the ◄ button to select Yes.
3.  Press the ENTER
E button.
 
✎This function is only available in Cable mode. 
Channel List
Channel List Option Menu 
Set each channel using the Channel List menu options (Add 
/ Delete, Timer Viewing, Select All / Deselect All). Option 
menu items may differ depending on the channel status.
1.  Select a channel and press the TOOLS button. 
2.  Select a function and change its settings.
 
■ Add / Delete: Delete or add a channel to display the 
channels you want.
 
✎NOTE
 
xAll deleted channels will be shown on the All 
Channels menu.
 
xA gray-colored channel indicates the channel 
has been deleted.
 
xThe Add menu only appears for deleted 
channels.
 
xDelete a channel from the Added Channels or 
Favorite menu in the same manner.
 
■ Timer Viewing: You can set a desired channel to be 
displayed automatically at the reserved time. Set the 
current time first to use this function.
1. Press the ◄ / ► / ▲ / ▼ buttons to select the 
desired channel in Channel List.
2.  Press the TOOLS button, then select Timer 
Viewing.
3.  Scroll up or down to adjust the settings in the box, 
or use the numeric buttons on your remote to enter 
the date and time.
 
✎If you selected  Once, Ever y Week or  Ever yDay 
in Repeat you can enter the date you want.
4.  Select OK, then press the ENTER
E button when 
done.
 
✎NOTE
 
xOnly memorized channels can be reserved.
 
xReserved programs will be displayed in the 
Programmed menu.
 
xWhen a digital channel is selected, press the ► 
button to view the digital program.
 
■ Select All: Select all the channels in the channel list.
 
■ Deselect All: Deselect all the selected channels. 
 
✎You can only select Deselect All when one or 
more channels are selected.
 Programmed
(in Channel List)
You can view, modify or delete a show you have reserved 
to watch. Programmed timer viewing is displayed here. 
Highlight a program and press the TOOLS button to display 
Options. 
 
■ Change Info: Change a show you have reserved to 
watch. Begin with step 3 of “Timer Viewing” above.
 
■ Cancel Schedules: Cancel a show you have reserved 
to watch.
 
✎This deletes the highlighted or selected 
program(s).
[UC7000_NA]BN68-02627A-06L03.indb   152010-06-25   오전 9:27:18 
						

							16English
Basic Features
 
■ Information: Display a show you have reserved 
to watch. (You can also change the reservation 
Information.)
 
✎Alternatively, you can view Information by 
highlighting a program and pressing the 
ENTER
E button.
 
■ Select All / Deselect All: Select or deselect all reserved 
programs.
Fine Tune 
(analog channels only)
If the reception is clear, you do not have to fine tune the 
channel, as this is done automatically during the search and 
store operation. If the signal is weak or distorted, fine tune 
the channel manually. Scroll to the left or right until the image 
is clear.
 
✎Settings are applied to the channel you're currently 
watching.
 
✎Fine tuned channels that have been saved are marked 
with an asterisk “*” on the right-hand side of the 
channel number in the channel banner.
 
✎To reset the fine-tuning, select Reset .
Picture Menu
 
¦ Changing the Preset Picture Mode
 
OMENUm → Picture → Mode → ENTERE
Mode t 
Select your preferred picture type. 
 
■ Dynamic: Suitable for a bright room.
 
■ Standard: Suitable for a normal environment.
 
■ Natural: Suitable for reducing eye strain.
 
✎Natural is not available in PC mode.
 
■ Movie: Suitable for watching movies in a dark room.
 
¦ Adjusting Picture Settings
 
OMENUm → Picture → ENTERE
Backlight / Contrast / Brightness / 
Sharpness / Color / Tint (G/R) 
Your television has several setting options for picture quality 
control.
 
✎NOTE
 
xWhen you make changes to Backlight, Contrast, 
Brightness, Sharpness, Color or Tint (G/R) the 
OSD will be adjusted accordingly.
 
xIn PC mode, you can only make changes to 
Backlight, Contrast and Brightness .
 
xSettings can be adjusted and stored for each 
external device connected to the T V.
 
¦ Economical Solutions
The Eco Function can be used to enhance your power 
savings.
Eco Solution
 
OMENUm → Picture → Eco Solution → ENTERE
 
■ Energy Saving (Off / Low / Medium / High / Picture 
Off / Auto): This adjusts the brightness of the TV in 
order to reduce power consumption. If you select 
Picture Off, the screen is turned off, but the sound 
remains on. Press any button except the volume button 
to turn on the screen.
 
■ Eco Sensor (Off / On): To enhance your power savings; 
the picture settings will automatically adapt to the light 
in the room.
 
✎If you adjust the Backlight , the Eco Sensor will 
be set to Off .
Min Backlight: When Eco sensor is On, the minimum 
screen brightness can be adjusted manually.
 
✎If Eco Sensor is On , the display brightness may 
change (become slightly darker in most cases) 
depending on the surrounding light intensity.
 
■ No Signal Power Off (Off / 15 min. / 30 min. / 60 
min.): To avoid unnecessary energy consumption, 
set how long you want the TV to remain on if it's not 
receiving a signal.
 
✎Disabled when the PC is in power saving mode.
[UC7000_NA]BN68-02627A-06L03.indb   162010-06-25   오전 9:27:19 
						

							17English
03Basic Features 
¦ Changing the Picture Options
Advanced Settings
 
OMENUm → Picture → Advanced Settings → 
ENTERE
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a 
more precise picture.
 
✎In PC mode, you can only make changes to Dynamic 
Contrast, Gamma, White Balance and LED Motion 
Plus.
 
■ Black Tone (Off / Dark / Darker / Darkest): Select the 
black level to adjust the screen depth.
 
■ Dynamic Contrast (Off / Low / Medium / High): Adjust 
the screen contrast. 
 
■ Shadow Detail (-2~+2): Increase the brightness of dark 
images.
 
■ Gamma: Adjust the primary color intensity.
 
■ Expert Pattern (Off / Pattern1 / Pattern2): By 
running the Expert Pattern function, the picture can 
be calibrated. If the OSD menu disappears or a menu 
other than the Picture menu is opened, the calibration is 
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate 
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate 
the affects of display settings on colors.
 
✎After selecting Pattern1 or Pattern2 , you can 
adjust any of the advanced settings to the desired 
effect.
 
✎While the Expert Pattern is running, sound is not 
output.
 
✎Only enabled in DT V, Component and HDMI 
modes.  
■ RGB Only Mode (Off / Red / Green / Blue): Displays 
the Red, Green and Blue color for making fine 
adjustments to the hue and saturation.
 
■ Color Space (Auto / Native / Custom): Adjust the 
range of colors available to create the image. To adjust 
Color, Red, Green, Blue and Reset, set Color Space 
to Custom.
 
■ White Balance: Adjust the color temperature for a more 
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's 
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red, 
green, blue) brightness.
Reset: Resets the White Balance to it's default 
settings.
 
■ 10p White Balance (Off / On): Controls the white 
balance in 10 point intervals by adjusting the red, green, 
and blue brightness.
 
✎Available when the picture mode is set to Movie 
and when the external input is set to all input.
 
✎Some external devices may not support this 
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default 
settings.
 
■ Flesh Tone: Emphasize pink “Flesh Tone.”
 
■ Edge Enhancement (Off / On): Emphasize object 
boundaries.
 
■ xvYCC (Off / On): Setting the xvYCC mode on 
increases detail and color space when watching movies 
from an external device (e.g. BD/DVD player) connected 
to the HDMI or Component IN jacks.
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component.
 
✎Some external devices may not support this 
function.
 
■ LED Motion Plus (Off / On): Removes drag from fast 
scenes with a lot of movement to provide a clear picture.
Advanced Settings
Black Tone   : Off  ►
Dynamic Contrast  : Medium
Shadow Detail  : -2
Gamma  : 0
Expert Pattern  : Off
RGB Only Mode  : Off
Color Space  : Native
▼
U Move    E Enter    R Return
[UC7000_NA]BN68-02627A-06L03.indb   172010-06-25   오전 9:27:19 
						

							18English
Basic Features
Picture Options
 
OMENUm → Picture → Picture Options → 
ENTERE
 
✎In PC mode, you can only make changes to the Color 
Tone, Size and Auto Protection Time .
 
■ Color Tone (Cool / Normal / Warm1 / Warm2) 
 
✎Warm1 or Warm2 will be deactivated when the picture 
mode is Dynamic .
 
✎Settings can be adjusted and stored for each external 
device connected to an input on the T V.
 
■ Size: Your cable box/satellite receiver may 
have its own set of screen sizes as well. 
However, we highly recommend you use 
16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit 
the entire screen.
 
✎Available with HD 1080i / 720p signals in 16:9 
mode.
4:3 : Sets the picture to basic (4:3) mode.
 
✎Do not watch in 4:3 format for a long time. Traces 
of borders displayed on the left, right and center 
of the screen may cause image retention(screen 
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off 
when HDMI (720p / 1080i / 1080p) or Component 
(1080i / 1080p) signals are inputted.
 
✎NOTE
 
xWhen Double (À, Œ) mode has been set in PIP 
(Picture-in-Picture), the Picture Size cannot be set.
 
xAfter selecting Zoom1, Zoom2 or Wide Fit : 
1.  Press the ► button to select Position.
2.    Press the ENTER
E button. 
3.  Press the ▲ or ▼ button to move the picture up 
or down.
4.  Press the ENTER
E button. 
5.  Press the ► button to select Reset.
6.  Press the ENTER
E button to reset the picture 
to its default position. 
 
xAfter selecting Screen Fit in HDMI (1080i/1080p) or 
Component (1080i/1080p) mode, you may need to 
center the picture: 
1.  Press the ◄ or ► button to select Position.
2.  Press the ENTER
E button. 
3.  Press the ▲, ▼, ◄ or ► button to move the 
picture.
4.  Press the ENTER
E button. 
5.  Press the ◄ or ► button to select Reset.
6.  Press the ENTER
E button.
 
xHD (High Definition): 16:9 - 1080i/1080p (1920x1080), 
720p (1280x720)
 
xSettings can be adjusted and stored for each 
external device you have connected to an input on 
the T V.
Input Source Picture Size
ATV, AV, 
Component (480i, 480p) 16:9, Zoom1, 
Zoom2, 4:3
DTV(1080i), 
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit, 
Screen Fit
PC 16:9, 4:3
 
■ Digital Noise Filter (Off / Low / Medium / High / Auto 
/ Auto Visualization): If the broadcast signal received 
by your TV is weak, you can activate the Digital Noise 
Filter feature to reduce any static and ghosting that may 
appear on the screen.
 
✎When the signal is weak, try other options until the 
best picture is displayed.
Auto Visualization: When changing analog channels, 
displays signal strength.
 
✎Only available for analog channels.
 
✎When bar is green, you are receiving the best 
possible signal.
P.SIZE
Picture Options
Color Tone  : Normal   ►
Size  : 16:9
Digital Noise Filter  : Auto
MPEG Noise Filter  : Auto
HDMI Black Level  : Normal
Film Mode  : Off
Auto Motion Plus   : Standard
▼
U Move    E Enter    R Return
[UC7000_NA]BN68-02627A-06L03.indb   182010-06-25   오전 9:27:20 
						

							19English
03Basic Features 
■ MPEG Noise Filter (Off / Low / Medium / High / 
Auto): Reduces MPEG noise to provide improved 
picture quality.
 
■ HDMI Black Level (Normal / Low): Selects the black 
level on the screen to adjust the screen depth.
 
✎Available only in HDMI mode.
 
■ Film Mode (Off / Auto1 / Auto2): Sets the TV to 
automatically sense and process film signals from all 
sources and adjusts the picture for optimum quality.
 
✎Available in T V, AV, COMPONENT (480i / 1080i) 
and HDMI (480i / 1080i).
 
■ Auto Motion Plus (Off / Clear / Standard / Smooth / 
Custom / Demo): Removes drag from fast scenes with 
a lot of movement to provide a clearer picture.
 
✎The info screen on your T V displays the resolution 
and frequency of the incoming video signal (60 
Hz). This displayed frequency is not what the 
T V is displaying by using the Auto Motion Plus 
function.
 
✎If noise occurs on the screen, please set the 
Auto Motion Plus to Off . If Auto Motion Plus 
is Custom , you can set up the Blur Reduction , 
Judder Reduction or Reset manually.
 
✎If Auto Motion Plus is Demo , you can compare 
the difference between on and off modes.
Blur Reduction: Adjusts the blur reduction level from 
video sources.
Judder Reduction: Adjusts the judder reduction level 
from video sources when playing films.
Reset: Reset the custom settings.
 
■ Auto Protection Time (2 hours / 4 hours / 8 hours 
/ 10 hours / Off): Set the time the screen remains idle 
with a still image until the screen saver is activated. The 
screen saver prevents the formation of ghost images on 
the screen.
 
¦ Viewing TV using the 3D function
 
OMENUm → Picture → 3D → ENTERE
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 
3D PICTURES. 
Read and understand the following safety information 
before using the TV’s 3D function.
 
[WARNING
 
xSome viewers may experience discomfort while 
viewing 3D T V such as dizziness, nausea and 
headaches. If you experience any such symptom, 
stop viewing 3D T V, remove 3D Active Glasses and 
rest.
 
xWatching 3D images for an extended period of time 
may cause eye strain. If you feel eye strain, stop 
viewing 3D T V, remove your 3D Active Glasses and 
rest.
 
xA responsible adult should frequently check on 
children who are using the 3D function. If there are 
any reports of tired eyes, headaches, dizziness, or 
nausea, have the child stop viewing 3D T V and rest.
 
xDo not use the 3D Active Glasses for other purposes 
(such as general eyeglasses, sunglasses, protective 
goggles, etc.)
 
xDo not use the 3D function or 3D Active Glasses 
while walking or moving around. Using the 3D 
function or 3D Active Glasses while moving around 
may result in injuries due to running into objects, 
tripping, and/or falling.
[UC7000_NA]BN68-02627A-06L03.indb   192010-06-25   오전 9:27:20 
						

							20English
Basic Features
3D
This exciting new feature enables you to view 
3D content. In order to fully enjoy this feature, 
you must purchase a pair of Samsung 3D 
Active Glasses (SSG-2100AB, SSG-2200AR, 
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold 
separately. For more detailed purchasing 
information, contact the retailer where you purchased this TV.
 
✎If there is any obstacle between the emitter and 3D 
Active Glasses, the proper 3D effect may not be 
obtained.
 
■ 3D Mode: Select the 3D input format.
 
✎If you want to feel the 3D effect fully, please wear 
the 3D Active Glasses first, and then select 3D 
Mode from the list below that provides the best 
3d viewing experience.
 
✎When watching 3D images, turn on 3D Active 
Glasses.
3D Mode Operation
Off Turns the 3D function off.
2D → 3DChanges a 2D image to 3D.
Side by SideDisplays two images next to 
each other.
Top & BottomDisplays one image above 
another.
Line by LineDisplays the images for the left 
and right eye alternately in rows.
Vertical StripeDisplays the images for the 
left and right eye alternately in 
columns.
Checker 
BoardDisplays the images for the 
left and right eye alternately in 
pixels.
Frequency
Displays the images for the 
left and right eye alternately in 
frames.
 
✎“ Side by Side” and “Top & Bottom” are available 
when the resolution is 720p, 1080i and 1080p in 
DT V, HDMI and USB mode or when set to PC 
and the PC is connected through an HDMI/DVI 
cable.
 
✎“Vertical Strip”, “Line by Line” and “Checker 
Board” are available when the resolution is set to 
PC and the PC is connected through an HDMI/
DVI cable.
 
✎“Frequency” displays the frequency (60Hz only) 
when the resolution is set to PC.
 
■ 3D → 2D (Off / On): Displays the image for the left eye 
only.
 
✎This function is deactivated when 3D Mode set to 
“2D → 3D” or Off .
 
■ 3D View point: The overall adjustment of 3D 
perspective.
 
✎This function is deactivated when 3D Mode set to 
“2D → 3D” or Off .
 
■ Depth: Adjusts focus / depth in “2D → 3D” mode.
 
✎This function is only activated when the 3D Mode 
is “2D → 3D”.
 
■ Picture Correction: Adjusts the images for the left and 
right eye.
 
■ 3D Auto View (Off / On): If 3D Auto View is set to On, 
a “Side-by-Side” format HDMI signal with one of the 
resolutions below is automatically switched to 3D. Here, 
correct 3D information must be sent from the Standard 
HDMI 3D Format.
 
✎If a 3D failure occurs due to a 3D information error, 
set 3D Auto View to Off and manually select a 
3D Mode using the 3D button or corresponding 
menu.
 
✎Support resolution (16:9 only)
Resolution Frequency (Hz)
1280 x 720p 60 Hz
1920 x 1080i 60 Hz
1920 x 1080p 24 / 30 / 60 Hz
 
■ 3D Optimize: The overall adjustment of 3D effect.
3D emitter
[UC7000_NA]BN68-02627A-06L03.indb   202010-06-25   오전 9:27:22