Ricoh Mp C306 User Guide

							Combined Copying
This mode can be used to select a reproduction ratio automatically and copy the originals onto a single
sheet of copy paper.
The machine selects a reproduction ratio between 25 and 400%. If the orientation of the original is
different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to
make copies properly.
Orientation of the original and image position of Combine
The image position of Combine differs according to original orientation and the number of originals
to be combined.
• Portrait (
) originals
• Landscape () originals
Placing originals (originals placed in the ADF)
The default value for the copy order in the Combine function is [From Left to Right]. To copy
originals from right to left in the ADF, place them upside down.
• Originals read from left to right
Combined Copying
69 CNU005  CNU006   
						

							• Originals read from right to left
One-Sided Combine
Combine several pages onto one side of a sheet.
• You cannot use the bypass tray with this function.
There are four types of One-Sided Combine.
1 Sided 2 Originals 
 Combine 1 Side
Copies two 1-sided originals to one side of a sheet.
1 Sided 4 Originals 
 Combine 1 Side
Copies four 1-sided originals to one side of a sheet.
2 Sided 2 Pages 
 Combine 1 Side
Copies one 2-sided original to one side of a sheet.
3. Copy
70CKN010 CKN017 CKN014       
						

							2 Sided 4 Pages  Combine 1 Side
Copies two 2-sided originals to one side of a sheet.
1. Press [Original Settng].
2.Press [Original Size].
3. Specify the original size, and then press [OK].
4. Select original orientation.
5.Press [OK].
6. Press [Dup./Combine/Series].
7. Press [Combine].
8. Select [1 Sided] or [2 Sided] for [Original:].
If you selected [2 Sided], you can change the orientation.
Combined Copying
71   
						

							9.Press [Combine 1 Side].
10. Select the number of originals to combine.
11. Press [OK].
12. Select the paper tray.
13. Place the originals, and then press [Start].
Two-Sided Combine
Combines various pages of originals onto two sides of one sheet.
• You cannot use the bypass tray with this function.
There are four types of Two-Sided Combine.
1 Sided 4 Originals 
 Combine 2 Sides
Copies four 1-sided originals to one sheet with 2 pages per side.
1 Sided 8 Originals 
 Combine 2 Sides
Copies eight 1-sided originals to one sheet with 4 pages per side.
2 Sided 4 Pages 
 Combine 2 Sides
Copies two 2-sided originals to one sheet with 2 pages per side.
3. Copy
72CKN074       
						

							2 Sided 8 Pages  Combine 2 Sides
Copies four 2-sided originals to one sheet with 4 pages per side.
1. Press [Original Settng].
2.Press [Original Size].
3. Specify the original size, and then press [OK].
4. Select original orientation.
5.Press [OK].
6. Press [Dup./Combine/Series].
7. Press [Combine].
8. Select [1 Sided] or [2 Sided] for [Original:].
Combined Copying
73   
						

							9.Press [Combine 2 Sides].
10. Press [Orientation].
11. Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.
12. Select [Top to Top] or [Top to Bottom] for [Copy:], and then press [OK].
13. Select the number of originals to combine.
14. Press [OK].
15. Select the paper tray.
16. Place the originals, and then press [Start].3. Copy
74  
						

							Copying onto Custom Size Paper
Paper that has a horizontal length of 139.0–600.0 mm (5.48–23.62 inches) and a vertical length of
76.2–216.0 mm (3.00–8.50 inches) can be fed in from the bypass tray. Note however that the
limitation on the horizontal and vertical length range will vary depending on which options are installed.
• When prints are delivered to Internal tray 2: Horizontal length: 210.0–600.0 mm (8.27–23.62 inches), vertical length: 139.7–216.0 mm(5.50–8.50 inches)
1. Load the paper face down in the bypass tray.
The bypass tray (
) is automatically selected.
2. Press [
].
3. Press [Paper Size].
4. Press [Custom Size].
5. Enter the horizontal size with the number keys, and then press [
].
6.Enter the vertical size with the number keys, and then press [].
7. Press [OK] twice.
8. Place the originals, and then press [Start].
Copying onto Custom Size Paper
75     
						

							Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Place the original on
the exposure glass and place the envelope in the bypass tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see page 134 "Recommended Paper Sizes and Types".
About handling envelopes, supported envelope types, and how to load envelopes, see page 139 "Envelopes".
Before using this function, select [Envelope] for the paper type under [Tray Paper Settings] in User Tools.
For details, see "Tray Paper Settings", Connecting the Machine/ System Settings.
• The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1 sided 
 2 sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal
and vertical length of the envelope.
: Horizontal
: Vertical
3. Copy
76  CNU010 CNU004     
						

							1.Load the envelopes face down in the bypass tray.
The bypass tray (
) is automatically selected.
2. Press [
].
3. Press [Paper Size].
4. Specify the envelope size, and then press [OK] twice.
5. Place the originals, and then press [Start].
Copying onto Envelopes
77   
						

							Sort
The machine assembles copies as sets in sequential order.
1. Press [Finishing].
2.Select [Sort], and then press [OK].
3.Enter the number of copy sets using the number keys.
4. Place the originals.
5. Select the paper tray.
6. Press [Start].
3. Copy
78CKN018