Panasonic Network Camera Wv Sud638 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Wv Sud638 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
•Available port number: 1 - 65535
• Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000
[Pre-installed certificate - Download root certificate]
Click the [ Execute] button to download the root certificate for the pre -installed certificate. By installing the root
certificate to your PC, you can get signature verification for the pre-installed certificate.
[CRT key...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-140.png "Page 141
•Available port number: 1 - 65535
• Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000
[Pre-installed certificate - Download root certificate]
Click the [ Execute] button to download the root certificate for the pre -installed certificate. By installing the root
certificate to your PC, you can get signature verification for the pre-installed certificate.
[CRT key...")
•Available port number: 1 - 65535 • Default: 443 The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000 [Pre-installed certificate - Download root certificate] Click the [ Execute] button to download the root certificate for the pre -installed certificate. By installing the root certificate to your PC, you can get signature verification for the pre-installed certificate. [CRT key...
Page 142
![Page 142
12.2.6 Configure the settings relating to DDNSTo access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
Refer to page 168 for how to configure the settings relating to DDNS.
[Area]
Select the region where the camera is installed.
Japan/Global
Note
•If the camera is used outside of Japan, select “Global”. If the camera is used in Japan, select
“Japan”.
[Service]
Select the DDNS service to determine whether or not to use DDNS.
• Off: Does not use the DDNS...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-141.png "Page 142
12.2.6 Configure the settings relating to DDNSTo access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
Refer to page 168 for how to configure the settings relating to DDNS.
[Area]
Select the region where the camera is installed.
Japan/Global
Note
•If the camera is used outside of Japan, select “Global”. If the camera is used in Japan, select
“Japan”.
[Service]
Select the DDNS service to determine whether or not to use DDNS.
• Off: Does not use the DDNS...")
12.2.6 Configure the settings relating to DDNSTo access this camera via the Internet, it is necessary to configure the settings for the DDNS function. Refer to page 168 for how to configure the settings relating to DDNS. [Area] Select the region where the camera is installed. Japan/Global Note •If the camera is used outside of Japan, select “Global”. If the camera is used in Japan, select “Japan”. [Service] Select the DDNS service to determine whether or not to use DDNS. • Off: Does not use the DDNS...
Page 143
![Page 143
[Community]
Enter the community name to be monitored.
• Available number of characters: 0 - 32 characters
• Default: None (blank)
IMPORTANT
•When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
• Available number of characters: 0 - 32 characters
• Default: None (blank)
[Location]
Enter the name of the location where the...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-142.png "Page 143
[Community]
Enter the community name to be monitored.
• Available number of characters: 0 - 32 characters
• Default: None (blank)
IMPORTANT
•When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
• Available number of characters: 0 - 32 characters
• Default: None (blank)
[Location]
Enter the name of the location where the...")
[Community] Enter the community name to be monitored. • Available number of characters: 0 - 32 characters • Default: None (blank) IMPORTANT •When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work. [System name] Enter a system name to be used to manage the camera with the SNMP function. • Available number of characters: 0 - 32 characters • Default: None (blank) [Location] Enter the name of the location where the...
Page 144
12.3 How to configure HTTPS settingsThe settings relating to the HTTPS protocol that can enhance the network security by encrypting the access to cameras on this page. HTTPS settings can be configured by either using the certificate pre-installed to the camera, or using a CA certificate that you obtained by yourself from the CA (CA: Certification Authority). The settings will be configured in the following procedure.When using a pre-installed certificate:When using a CA certificate:Generate CSR...
Page 145
![Page 145
Configuring the HTTPS connection (®page 145)
Generation of the CRT key (SSL encryption key) ( ®page 146)
Generation of CSR (Certificate Signing Request) ( ®page 147)
Installation of the server certificate ( ®page 149)
Note
•To use the CA certificate, you need to apply for the approval and the issue of server certificate by CA.
12.3.1 Configuration of HTTPS connections 1.Select “HTTPS” to access the camera in [HTTPS – Connection].
2. Select the certificate to be used with HTTPS with [HTTPS – Select...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-144.png "Page 145
Configuring the HTTPS connection (®page 145)
Generation of the CRT key (SSL encryption key) ( ®page 146)
Generation of CSR (Certificate Signing Request) ( ®page 147)
Installation of the server certificate ( ®page 149)
Note
•To use the CA certificate, you need to apply for the approval and the issue of server certificate by CA.
12.3.1 Configuration of HTTPS connections 1.Select “HTTPS” to access the camera in [HTTPS – Connection].
2. Select the certificate to be used with HTTPS with [HTTPS – Select...")
Configuring the HTTPS connection (®page 145) Generation of the CRT key (SSL encryption key) ( ®page 146) Generation of CSR (Certificate Signing Request) ( ®page 147) Installation of the server certificate ( ®page 149) Note •To use the CA certificate, you need to apply for the approval and the issue of server certificate by CA. 12.3.1 Configuration of HTTPS connections 1.Select “HTTPS” to access the camera in [HTTPS – Connection]. 2. Select the certificate to be used with HTTPS with [HTTPS – Select...
Page 146
Note•When the connection setting is changed, after waiting for a while, access the camera again with either “http://IP address of the camera” or “https://IP address of the camera” depending on the changed setting. • When using the pre-installed certificate: In advance, install the root certificate of the Pre-installed certificate on the PC in use. Refer to page 150 for information on the setting procedure. • When using the CA certificate: In advance, install the root certificate and intermediate...
Page 147
![Page 147
3.Click the [Execute] button.
→ The generation of CRT key will be started. When the generation is finished, the key size and generation
time & date of the generated key will be displayed on “Current CRT key”.
Note
•To change ( or update) the generated CRT key, perform step 1 to 3. The CRT key, server certification
are valid in a set. When the CRT key is changed, it is necessary to re-apply for the server certificate.
• When the CRT key is updated, the log of the previous CRT key is saved. When the [...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-146.png "Page 147
3.Click the [Execute] button.
→ The generation of CRT key will be started. When the generation is finished, the key size and generation
time & date of the generated key will be displayed on “Current CRT key”.
Note
•To change ( or update) the generated CRT key, perform step 1 to 3. The CRT key, server certification
are valid in a set. When the CRT key is changed, it is necessary to re-apply for the server certificate.
• When the CRT key is updated, the log of the previous CRT key is saved. When the [...")
3.Click the [Execute] button. → The generation of CRT key will be started. When the generation is finished, the key size and generation time & date of the generated key will be displayed on “Current CRT key”. Note •To change ( or update) the generated CRT key, perform step 1 to 3. The CRT key, server certification are valid in a set. When the CRT key is changed, it is necessary to re-apply for the server certificate. • When the CRT key is updated, the log of the previous CRT key is saved. When the [...
Page 148
![Page 148
1.Click the [Execute] button of “CA Certificate - Generate Certificate Signing Request”.
→ The “CA Certificate - Generate Certificate Signing Request” dialog box will be displayed.
2.Enter the information of the certificate to be generated.
ItemDescriptionAvailable number of characters[Common Name]Enter the camera address or host name.64 characters[Country]Enter the country name.2 characters (Country code)[State]Enter the state name.128 characters[Locality]Enter the locality name.128...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-147.png "Page 148
1.Click the [Execute] button of “CA Certificate - Generate Certificate Signing Request”.
→ The “CA Certificate - Generate Certificate Signing Request” dialog box will be displayed.
2.Enter the information of the certificate to be generated.
ItemDescriptionAvailable number of characters[Common Name]Enter the camera address or host name.64 characters[Country]Enter the country name.2 characters (Country code)[State]Enter the state name.128 characters[Locality]Enter the locality name.128...")
1.Click the [Execute] button of “CA Certificate - Generate Certificate Signing Request”. → The “CA Certificate - Generate Certificate Signing Request” dialog box will be displayed. 2.Enter the information of the certificate to be generated. ItemDescriptionAvailable number of characters[Common Name]Enter the camera address or host name.64 characters[Country]Enter the country name.2 characters (Country code)[State]Enter the state name.128 characters[Locality]Enter the locality name.128...
Page 149
![Page 149
Note•This camera generates the CSR file in the PEM format.
12.3.4 Installation of the server certificate
IMPORTANT •If the CSR file is not generated, it is impossible to install the server certificate (security certificate). For
the installation, the server certificate issued by CA is required.
1. Click the [Browse...] button of “CA Certificate - CA Certificate install”.
→ The [Open] dialog box will be displayed.
2. Select the server certification file and click the [Open] button. Then, click the...](http://img.usermanuals.tech/thumb/58/72261/w300_wv-sud638_oi_d-148.png "Page 149
Note•This camera generates the CSR file in the PEM format.
12.3.4 Installation of the server certificate
IMPORTANT •If the CSR file is not generated, it is impossible to install the server certificate (security certificate). For
the installation, the server certificate issued by CA is required.
1. Click the [Browse...] button of “CA Certificate - CA Certificate install”.
→ The [Open] dialog box will be displayed.
2. Select the server certification file and click the [Open] button. Then, click the...")
Note•This camera generates the CSR file in the PEM format. 12.3.4 Installation of the server certificate IMPORTANT •If the CSR file is not generated, it is impossible to install the server certificate (security certificate). For the installation, the server certificate issued by CA is required. 1. Click the [Browse...] button of “CA Certificate - CA Certificate install”. → The [Open] dialog box will be displayed. 2. Select the server certification file and click the [Open] button. Then, click the...
Page 150
•When the server certificate has expired, the HTTPS function will become unavailable. When the camera is restarted, the connection protocol will be changed to HTTP. Update the server certificate before it expires. • The expiration date of the server certificate can be checked by double-clicking the server certification file issued by CA. 12.4 Access the camera using the HTTPS protocol (for pre-installed certificate) When accessing the camera with HTTPS from a browser using the pre-installed certificate,...