Panasonic Network Camera Wv Sud638 Operating Instructions

11   Configure the settings relating to the
authentication [User mng.]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a
PC or cellular phone/mobile terminal can be configured on the “User mng.” page.
The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab.
11.1  Configure the settings relating to the user
authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. ( ®page 32, page...

•Basic:  Uses Basic authentication.
• Default:  Digest or Basic
Note
•When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
• For other devices such as network disk recorders, unless otherwise stated, Digest authentication is
not supported. (As of August, 2016)
[User name]
Enter a user name.
• Available number of characters:  1 - 32 characters
• Unavailable characters:  " & : ; \
• Default:  None (blank)
Note
•When the user name already in use is...

The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
• Default:  Off
[IP address]
Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP
address.
Note
•When “IP address/subnet mask”  is entered, it is possible to restrict PCs in each subnet. For example,
when “192.168.0.1/24” is entered and “2. Camera control” is...

The description below is the configuration of the priority stream that can transmit images without deteriorating
the image quality and refresh interval even when multiple users access concurrently.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
• Default:  Off
Note
•When  “On” is selected for  “Activation” of “Priority stream ”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP...

Note•When “On” is selected for “H.264 transmission”, the transmission interval may be longer than the set
value when any value with an asterisk (*) on the right is selected.Operating Instructions125
11 Configure the settings relating to the authentication [User mng.] 

12   Configuring the network settings [Network]The network settings can be configured on the “Network” page.
The “Network” page has the [Network] tab and the [Advanced] tab.
12.1  Configure the network settings [Network] Click the [Network] tab on the “Network” page. ( ®page 32, page 34)
The following information is required to configure the network settings. Contact the network administrator or
your Internet service provider.
• IP address
• Subnet mask
• Default gateway (when using the gateway...

IPv4 network[Network Settings]
Select the method of how to configure the IP address from the following.
• Static:  The IP address is configured by entering manually on “IP address(IPv4)”.
• DHCP:  The IP address is configured using the DHCP function.
• Auto(AutoIP):  The IP address is configured using the DHCP function. When the DHCP server is not found,
the IP address is automatically configured.
• Auto(Advanced):  Using the DHCP function, network address information is referred to, and an unused
IP...

IPv6 network[Manual]
Select “On” or “Off” to determine whether or not to manually configure the IP address for IPv6 network (IPv6
address).
• On:  Enter an IPv6 address manually.
• Off:  Manual entry of an IPv6 address will become unavailable.
• Default:  Off
[IP address(IPv6)]
When “On” is selected for “Manual”, manual entry of the IPv6 address is required. Do not enter an address
already in use.
Note
•When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible...

[Max RTP packet size]
Select  “Unlimited(1500byte)”  or “Limited(1280byte)”  to determine whether or not to restrict the RTP packet size
when viewing images from the camera using the RTP protocol. It is recommended to use with the default
“Unlimited(1500byte)”.
When the RTP packet size is restricted in the network line in use, select “Limited(1280byte)”. Refer to the
network administrator for further information about the maximum packet size in the network line.
• Default:  Unlimited(1500byte)
[HTTP max...

•To access the camera via the Internet by connecting the camera to a router, it is necessary to assign
a respective HTTP port number for each camera and address translation by using the port forwarding
function of the router. For further information, refer to the operating instructions of the router in use.
[FTP access to camera]
Select “Allow” or “Forbid” to determine whether to allow or forbid the FTP access to camera.
• Default:  Forbid
12.2  Configure advanced network settings
[Advanced] Click the...