Panasonic Network Camera Wv Sud638 Operating Instructions

2.Click “Install Certificate...”.
3.Click “Next” displayed in “Certificate Import Wizard”.
Operating Instructions151
12 Configuring the network settings [Network]     

4.Select “Place all certificates in the following store”, and click “Browse...”.
5.Select “Trusted Root Certificate Authorities”, and click “OK”.
152Operating Instructions
12 Configuring the network settings [Network]     

6.Click “Next”.
7.Click “Finish”.
8.Confirm that the content shown next to “Thumbprint” in the “Security warning” window is as follows and
then click “Yes”.
• Thumbprint (sha1): 0B886A3C E7F2DBA8 1035DDFA 2B21F80B 06778932
Operating Instructions153
12 Configuring the network settings [Network]     

Note•Other parties cannot create another thumbprint with the same values. You can confirm that you
have retrieved the correct root certificate from the specified camera by confirming the values of the
thumbprint.
®  When the import is successfully completed, the screen “The import was successful.” will be displayed.
9. Click the “OK” button.
154Operating Instructions
12 Configuring the network settings [Network]     

10.Click the “OK” button in the “Certificate” window to close the window.
11.Start up the web browser.
12.4.2  Configuration of the host file This procedure must be done on each PC for all the camera that are accessed.
Note•The following procedure cannot be used if you are using DDNS.
1. Start the browser and then access the camera using the HTTPS protocol. Refer to page  145 for information
about how to make connections with HTTPS.
Operating Instructions155
12 Configuring the network settings [Network]   

2.When the security alert window is displayed, click “Continue to this website (not recommended).”
®The “Live” page will be displayed. If an authentication window is displayed, enter the user name and
password.
Note
•This warning is displayed because the text entered in the address box does not match the text
displayed in the subject of the certificate. This type of warning is displayed because when the
certificate for the pre-installed certificate is created, the IP address or domain name assigned to...

Note•If “Certificate Invalid” is displayed as shown below even though you have installed the root
certificate  (® page  150), end the connection, and check that no suspicious devices are connected.
4. The “Certificate” window is displayed. Select the “Details” tab.
Operating Instructions157
12 Configuring the network settings [Network]     

5.Confirm  that is displayed for “Show” and then click “Subject” in the field. Copy the text shown after
“CN=” in the lower box.158Operating Instructions
12 Configuring the network settings [Network]   

6.From the Start menu enter the following text in the “Search programs and files” text box and then press
[Ctrl], [Shift], and [Enter] at the same time.
notepad C:\Windows\System32\drivers\etc\hosts
7. If the “User Account Control” window is displayed, select “Yes”.
Operating Instructions159
12 Configuring the network settings [Network]   

8.The “hosts - Notepad” window is opened. Add the following text to the end of the file.
(camera IP address) (copied text from step 5)
The example is when the IP address is “192.168.0.10” and the CN of the camera is “WV–
SUD638.0000-0100-450D-0022.panasonic-security-system.net”.
9. Select “File”  ® “Save” to save the file and then close the file.
10. When accessing with a browser, add the following text for the CN after entering "https://" in the
"address" box.
IMPORTANT
•When the HTTPS...