Panasonic Network Camera Wv Sud638 Operating Instructions

14   Extension unit setting [Extension unit]
(WV-SUD6FRL1)
The settings can be configured on the “Extension unit” page when using the front unit.
The “Extension unit” page only has the [Front unit] tab.
Refer to the manuals provided with the extension unit to be used for further information about the settings.
Refer to our website (http://security.panasonic.com/support/info/) for further information about optional units
supported by the camera and their supported software versions.Operating...

15   Maintenance of the camera [Maintenance]System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The “Maintenance”  page has the [System log] tab, the [Upgrade] tab, [Status ] tab, the [Default reset] tab, and
the [Data] tab.
15.1  Check the system log [System log] Click the [System log] tab on the “Maintenance” page. ( ®page 32, page 34)
Up to 100 system logs can be saved on the built -in memory of the camera. When the saved system logs...

The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for
further information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware version], [IP address(IPv6)], [Viewer
software installation counter], [Time past from the date of manufacture]
Information of each item will be displayed.
1. Contact the dealer and download the latest firmware onto a PC.
IMPORTANT
•A blank (space) cannot be used for the name of the directory where...

3.Click the radio button respective to the desired option to determine whether or not to initialize the settings
after completing the firmware upgrade.
Default:  Do not reset the settings to the default after the upgrade.
Note
•Note that the settings cannot be restored after an initialization is operated.
4. Click the [Execute] button.
→ The confirmation window will be displayed.
IMPORTANT
•After completing the upgrade, delete temporary internet files. ( ®page 200)
• Upgrade the firmware using a PC in...

The status of this camera can be checked on this page.
Viewnetcam.comThis is only displayed when using Viewnetcam.com.
[Server]
The URL of the “Viewnetcam.com” service server will be displayed.
[Status]
The registration status for the “Viewnetcam.com” will be displayed.
[Personal(Camera) URL]
The URL of the camera registered for “Viewnetcam.com” will be displayed.
UPnP [Port number(HTTP), Port number(HTTPS)]
The port number that is set for UPnP port forwarding will be displayed.
Operating...

[Status]
The port forwarding status will be displayed.
[Router global address]
The global address of router will be displayed.
Note
•Refer to our website (http://security.panasonic.com/support/info/) for further information about the
contents of the displayed statuses (relating to the “Viewnetcam.com” service, the UPnP function, self
check, hardware information, or wiper counter).
Self check The self check result of the hardware will be displayed. There are no problems if a number contains all 0’s....

•Wiper rubber exchange timing notification
An external notification is sent when the wiper rubber operation counter gets close to the exchange
guideline number.
External notification methods
• Notifying via email
Damage notifications are made to the registered notification address when “On” is selected for “E-mail
notification” of “E-mail server >>” in the [Alarm] tab of the “Alarm” page. The settings for the email
notifications can be configured in the [Alarm] tab of the “Alarm” page ( ®page 101), and...

[Reboot]
Click the [Execute] button to reboot the camera. It is impossible to operate the camera for about 2 minutes
after rebooting the camera.
[Position refresh]
The camera position can be refreshed. When the camera has moved from the correct home/preset position
during normal use, or when it has been inadvertently moved while turning on the power of the camera, use
this function to correct the camera position. It is impossible to operate the camera during the position refresh
process (for about 2...

Backup[Setup data]
Click the [Execute] button to backup the setup data of the camera to a PC.
[Scene file]
Click the [Execute] button to backup the scene files of the camera to a PC.
[Logs]
Click the [Execute] button to backup the log data of the camera to a PC.
IMPORTANT
•When backing up settings or logs, creating the backup files takes time.
• When the backup operation takes 10 minutes or more, a communication timeout may occur. In this
case all of the backup data may not be obtained. Therefore, we...

16   Using the CD-ROM
16.1  About the CD launcher By inserting the provided CD -ROM into the CD -ROM drive of your PC, the CD launcher is automatically started
and the license agreement is displayed. Read the agreement and select “I accept the terms in the license
agreement”, and then click “OK”.
The CD launcher window is displayed.
• If the launcher window is not displayed, double click the “CDLauncher.exe” file on the CD-ROM.
Using the supplied CD-ROM, the following actions can be performed.
The...