Panasonic Network Camera Wv Sud638 Operating Instructions

11.When the settings are completed, the color of the background of the address box changes to white. Confirm
that “Website Identification” is displayed after clicking the key mark on the right side of the address bar.
Note
•If you cannot access with this method it may be because of proxy server settings. Ask the network
administrator.
IMPORTANT
•When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.
12.5  Access the camera using the HTTPS...

12.5.1  Install the security certificateWhen accessing a camera with HTTPS and the PC cannot verify the signer of the security certificate, a security
alert window will be displayed for the camera being accessed. To have the security alert window not displayed,
it is necessary to install the security certificate in the following procedure. If the certificate is not installed, the
alert window will be displayed each time the camera is accessed.
Note
•The security certificate is installed on the PC with...

3.Click “Certificate Error” over the URL, and click “View certificates”.Operating Instructions163
12 Configuring the network settings [Network]   

4.Click “Install Certificate...”.
Note
•If [Install Certificate...] is not displayed, close Internet Explorer once, and select [Run as
Administrator ] to launch Internet Explorer again. Click [ Start] ®  [All Programs]  ® right click [ Internet
Explorer]  ® click [Run as Administrator].
• When using Windows 10, Windows 8.1 or Windows 8, right click [ iexplore] under “C:\Program Files
\Internet Explorer” and select [Run as Administrator].
164Operating Instructions
12 Configuring the network settings...

5.Click “Next” displayed on “Certificate Import Wizard”.
6.Select “Place all certificates in the following store”, and click “Browse...”.
Operating Instructions165
12 Configuring the network settings [Network]     

7.Select “Trusted Root Certificate Authorities”, and click “OK”.
8.Click “Next”.
166Operating Instructions
12 Configuring the network settings [Network]     

9.Click “Finish”.
10.Click “Yes”.
→When the import is successfully completed, the screen  “The import was successful. ” will be displayed.
Operating Instructions167
12 Configuring the network settings [Network]     

11.Click “OK”.
→When the browser is restarted after the certificate is imported,  “Certificate Error” will not be displayed.
12.6  How to configure the settings relating to DDNS When activating the DDNS function using the camera, either of the following DDNS services is available.
• “Viewnetcam.com” service
• Dynamic DNS Update (RFC2136 compliant)
IMPORTANT
•Before using the DDNS service, it is necessary to perform the port forwarding setting for the router.
• About Dynamic DNS Update (RFC2136...

12.6.1  Configuration of the DDNS service (Example of the
“Viewnetcam.com” service)
A. DNS server
B. Internet
C. Provider
D. “Viewnetcam.com” service server
E. Remote site
Global address is changed.
The contracted provider allocates a global address to the router  (or the camera). The global address is not
static but dynamic.
“*****.viewnetcam.com” and the current global address is automatically registered.
If you are enrolled in  “Viewnetcam.com”, the unique “domain name” (example: *****.viewnetcam.com)...

12.6.2  When using the “Viewnetcam.com” service
[Personal(Camera) URL]
The URL of the camera registered for “Viewnetcam.com”.
[Your Account Link]
When the displayed URL is clicked, the registration window for the  “Viewnetcam.com” service will be displayed
in a newly opened window.
Register the information in the registration window to enroll in the “Viewnetcam.com” service.
[Access interval]
Select the interval to access the  “Viewnetcam.com” service server to check the IP address and the host name
from...