Panasonic Network Camera Wv Sfv481 Operating Instructions

IMPORTANT•Use an NTP server when the more accurate time & date setting is required for the system operation.
[Time adjustment]
Select the time adjustment method from the following. Time adjusted by the selected method will be used as
the standard time of the camera.
• Manual:  Time set on the [ Basic] tab on the “Basic”  page will be used as the standard time of the camera.
• Synchronization with NTP server:  Time automatically adjusted by synchronizing with the NTP server
will be used as the standard...

The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.
• Default:  1h
15.2.4  Configure the UPnP settings This camera support UPnP (Universal Plug and Play). By using the UPnP function, it becomes possible to
configure the following automatically.
– Configuration of the port forwarding...

[Start] ® [Control Panel]  ® [Network and Internet]  ® [Network and Sharing Center]  ® expand the
section of [Network discovery] of [Sharing and Discovery]  ® select [Turn on network discovery ] ®  click
[Apply]  ® Complete
For Windows 7
[Start ] ®  [Control Panel]  ® [Network and Internet]  ® [Network and Sharing Center ] ®  select [ Turn on
network discovery] of [Network discovery] of [Change advanced sharing settings]  ® click [Save
changes]  ® Complete
For Windows 8.1 and Windows 8
Right-click...

[CA Certificate - Generate Certificate Signing Request]
When using the security certificate issued by CA (Certificate Authority) as the security certificate used for the
HTTPS protocol, the CSR (Certificate Signing Request) will be generated.
To generate the CSR, click the [Execute] button to display the “CA Certificate - Generate Certificate Signing
Request” dialog window.
[CA Certificate - CA Certificate install]
Installs the server certificate (security certificate) issued by CA (Certificate...

•The maximum number of concurrent access user varies depending on the maximum image size and
transmission format.
15.2.6  Configure the settings relating to DDNS To access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
Refer to page 191 for how to configure the settings relating to DDNS.
[Area]
Select the region where the camera is installed. If the camera is used outside of Japan, select  “Global”. If the
camera is used in Japan, select “Japan”....

[Community]
Enter the community name to be monitored.
• Available number of characters:  0 - 32 characters
• Default:  None (blank)
IMPORTANT
•When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the camera with the SNMP function.
• Available number of characters:  0 - 32 characters
• Default:  None (blank)
[Location]
Enter the name of the location where the...

15.3  How to configure HTTPS settingsThe settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
Generation of the CRT key (SSL encryption key) ( ®page 178)
Generation of the self-signed certificate ( ®page 179)
Generation of CSR (Certificate Signing Request) ( ®page 181)
Installation of the server certificate ( ®page 182)
Configuration of the connection protocol (...

Note•To use the server certificate, you need to apply for the approval and the issue of server certificate by
CA.
• Either of the self -signed certificate or the server certificate is available. If both of them are installed, the
server certificate will be used prior to the self-signed certificate.
15.3.1  Generation of the CRT key (SSL encryption key)
IMPORTANT •When the self- signed certificate or server certificate is valid, it is impossible to generate the CRT key.
• When server certification is...

key. When the [Apply] button is clicked on the  “Previous CRT key” dialog box, it is possible to replace
the current CRT key with the previous one.
15.3.2  Generation of the self-signed certificate (security
certificate)
IMPORTANT •If the CRT key is not generated, it is impossible to generate the self-signed certificate.
1. Click the [Execute] button of “Self-signed Certificate - Generate”.
→ The “Self-signed Certificate - Generate” dialog box will be displayed.
2.Enter the information of the certificate...

ItemDescriptionAvailable number of characters[Organizational
Unit]Enter the unit name of the organization. 
(Omission is OK.)64 characters[CRT key]Displays the key size and generation time  & date
of the current key.
Note
•The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )
• When the camera is connected to the Internet, enter the address name or host name to access via
the Internet for  “Common...