Panasonic Network Camera Wv Sfv481 Operating Instructions

3.Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the window.Operating Instructions201
16 Configure the settings relating to the schedules [Schedule]   

16.2  How to delete the set schedule
1.Uncheck the check box of the set day of the week.
202Operating Instructions
16 Configure the settings relating to the schedules [Schedule]   

2.Click the [Set] button after completing the settings.
→ The schedule of the selected day of the week is deleted.Operating Instructions203
16 Configure the settings relating to the schedules [Schedule]   

17   Maintenance of the camera [Maintenance]System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The “Maintenance”  page has the [System log] tab, the [Upgrade] tab, [Status ] tab, the [Default reset] tab, and
the [Data] tab.
17.1  Check the system log [System log] Click the [System log] tab of the “Maintenance” page. ( ®page 56, page 58)
Up to 4,000 system logs can be saved on the SD memory card when the SD memory card is inserted after...

The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for
further information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware version], [IP address(IPv6)], [Viewer
software installation counter], [Time past from the date of manufacture]
Information of each item will be displayed.
1. Contact the dealer and download the latest firmware onto a PC.
IMPORTANT
•A blank (space) cannot be used for the name of the directory where...

3.Click the radio button respective to the desired option to determine whether or not to initialize the settings
after completing the firmware upgrade.
Default:  Do not reset the settings to the default after the upgrade.
Note
•Note that the settings cannot be restored after an initialization is operated.
4. Click the [Execute] button.
→ The confirmation window will be displayed.
IMPORTANT
•After completing the upgrade, delete temporary internet files. ( ®page 221)
• Upgrade the firmware using a PC in...

The status of this camera can be checked on this page.
Viewnetcam.com[Server]:  The URL of the “Viewnetcam.com” service server will be displayed.
[Status]:  The registration status for the “Viewnetcam.com” will be displayed.
[Personal(Camera) URL]:  The URL of the camera registered for “Viewnetcam.com” will be displayed.
UPnP [Port number(HTTP), Port number(HTTPS)]:  The port number that is set for UPnP port forwarding will be
displayed.
[Status]:  The port forwarding status will be displayed.
[Router...

The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Load the default HTML files (setup menu).]
Click the [Execute] button to reset the HTML files to the default.
It is impossible to...

The settings related to backing up or restoring settings data, and saving logs can be configured in this section.
Backup[Setup data]
Click the [Execute] button to backup the setup data of the camera to a PC.
[Scene file]
Click the [Execute] button to backup the scene files of the camera to a PC.
[Logs]
Click the [Execute] button to backup the log data of the camera to a PC.
IMPORTANT
•When backing up settings or logs, creating the backup files takes time.
• When the backup operation takes 10 minutes or...

Make sure to set the file name of scene file data used when restoring to “model name.txt”. (The model name
must be written in lower case letters and “WV-” is not needed.)210Operating Instructions
17 Maintenance of the camera [Maintenance]