Panasonic Network Camera Wv Sfv481 Operating Instructions

10.Click “Yes”.
→When the import is successfully completed, the screen  “The import was successful. ” will be displayed.
11. Click “OK”.
→When the browser is restarted after the certificate is imported,  “Certificate Error” will not be displayed.
15.5  How to configure the settings relating to DDNS When activating the DDNS function using the camera, either of the following DDNS services is available.
• “Viewnetcam.com” service
• Dynamic DNS Update (RFC2136 compliant)
IMPORTANT
•Before using the DDNS...

Note•“Viewnetcam.com” is a Dynamic DNS service designed for use with Panasonic Network Cameras.
Refer to the “Viewnetcam.com” website (http://www.viewnetcam.com/) for further information about
the service.
About DDNS services (IPv4/IPv6) By using a DDNS service, it becomes possible to view camera images via the Internet.
The DDNS service associates dynamic global addresses and domain names.
It is possible to configure the settings for the  “Viewnetcam.com” or Dynamic DNS Update  (RFC2136 compliant).
In...

“*****.viewnetcam.com” and the current global address is automatically registered.
If you are enrolled in  “Viewnetcam.com”, the unique “domain name” (example: *****.viewnetcam.com) will
be allocated. The “Viewnetcam.com” service server automatically manages the domain name of camera
and the global address of router (or camera) when a camera automatically notifies the service server of
the global address.
Current global address is automatically registered via “*****.viewnetcam.com”.
The “Viewnetcam.com”...

If you cannot access the camera using the registered URL 30 minutes after registering with
“Viewnetcam.com”, select “Advanced”.
In this case, UPnP ( ®page 172) must be enabled for the camera and for the router.
• Default:  Normal
15.5.3  Procedure to register information for the
“Viewnetcam.com” service
1.Select [Viewnetcam.com] for [Service] and click the [Set] button.
→ A URL is displayed in [Your Account Link].
If a URL is not displayed in [Your Account Link], confirm the camera's network settings...

Note•When the registration for the “Viewnetcam.com” service is completed, the URL registered for
“Personal( Camera) URL ” is displayed. It may take up to about 30 minutes until the URL of the registered
camera is validated.
• To cancel the enrollment in the “Viewnetcam.com” service, access the “Viewnetcam.com” website
(http://www.viewnetcam.com/) later.
• When “Expired” is displayed in the URL of “Viewnetcam.com” in the viewnetcam settings page or the
status page, restart the camera after registering the...

•Default:  24h
15.5.6  When using “Dynamic DNS Update(DHCP)”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
• Available number of characters:  3 - 250 characters
Enter in the form of “(host name). (domain name)”.
• Available characters:  Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
• Default:  None (blank)
Note
•Refer to the network administrator for further information about the available host names.
196Operating...

16   Configure the settings relating to the
schedules [Schedule]
On the “Schedule” page, it is possible to configure the settings relating to schedules as follows.
• Alarm permission
• VMD permission
• Audio detection permission
• Access permission
• H.264 recording
• Scene file
• FTP periodic image transmission
The “Schedule” page has only the [Schedule] tab.Operating Instructions197
16 Configure the settings relating to the schedules [Schedule] 

Up to 5 schedules can be set.
1.Select an action to be assigned to the schedule from “Schedule mode”.
“Off” is selected at the default.
• Off:  No action will be taken for the respective schedule.
• Alarm permission:  Alarm input (terminal alarm) will be received during the period of the schedule.
• VMD permission:  The video motion detection (VMD) function will be active during the period of the
schedule.
198Operating Instructions
16 Configure the settings relating to the schedules [Schedule]   

•Audio detection permission:  The audio detection function will be active during the period of the
schedule.
• Access permission:  Users whose access level is set to 2 and 3 on the [User auth.] tab
( ® page 154) can access the camera only in the period of schedule.
• H.264 recording(Recording stream):  The SD recording will be performed at the designated time in
the schedule. Only available when H.264 images are used.
• Image adjust 1:  Images are set to the image settings of “Scene file” at the...

16.1  How to set the schedules
1.Check the check box of the desired day of the week of “Schedules”.
→ The selected day of the week will be validated for the schedule.
2. To designate time, select the desired “hour” and “minute” from the pull-down menu.
When not designating time, check the checkbox of “24h”.
200Operating Instructions
16 Configure the settings relating to the schedules [Schedule]