Panasonic Network Camera Wv Sfv481 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Wv Sfv481 Operating Instructions. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 1
Operating InstructionsNetwork CameraModel No. WV-SFV481 WV-SFN480 This manual covers the models: WV-SFV481 and WV-SFN480.Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.WV-SFV481WV-SFN480
Page 2
Preface About the user manuals There are 3 sets of operating instructions as follows. • Operating Instructions (this document): Explains how to perform the settings and how to operate this camera. • Important Information: Provides information about the cautions required for safely using and installing this camera. • Installation Guide: Explains how to install and connect devices. The screens used in these operating instructions show the case of WV-SFV481. Depending on the model used, the screens shown in...
Page 3
![Page 3
Viewer softwareIt is necessary to install the viewer software “Network Camera View 4S ” (ActiveX®
) to display images on a PC.
This software can be installed directly from the camera or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•The default setting of “Automatic installation” is “On”. Follow the instructions on page 229 when the
message is displayed on the information bar of the browser.
• When...](http://img.usermanuals.tech/thumb/58/73661/w300_wv-sfv481_operating_instructions_d-2.png "Page 3
Viewer softwareIt is necessary to install the viewer software “Network Camera View 4S ” (ActiveX®
) to display images on a PC.
This software can be installed directly from the camera or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•The default setting of “Automatic installation” is “On”. Follow the instructions on page 229 when the
message is displayed on the information bar of the browser.
• When...")
Viewer softwareIt is necessary to install the viewer software “Network Camera View 4S ” (ActiveX® ) to display images on a PC. This software can be installed directly from the camera or by selecting the [Install] button next to [Viewer Software] on the menu of the CD-ROM provided, and then following the on-screen instructions. IMPORTANT •The default setting of “Automatic installation” is “On”. Follow the instructions on page 229 when the message is displayed on the information bar of the browser. • When...
Page 4
Table of Contents1 Monitor images on a PC .. ........................................................................ 7 1.1 Monitor images from a single camera .. ...........................................................................7 1.2 About live image types .. ................................................................................................... 9 1.2.1 Type of images that can be displayed according to the image setting .. ...........................9 1.2.2 About image capture mode...
Page 5
![Page 5
11 Configure the settings relating to images and audio [Image/Audio] .. .................................................................................................... 94
11.1 Configure the settings relating to the image capture mode [JPEG/H.264] .. ..............94
11.2 Configure the settings relating to JPEG images [JPEG/H.264] .. ................................95
11.3 Configure the settings relating to H.264 images [JPEG/H.264] .. ................................97
11.4 Configure the settings...](http://img.usermanuals.tech/thumb/58/73661/w300_wv-sfv481_operating_instructions_d-4.png "Page 5
11 Configure the settings relating to images and audio [Image/Audio] .. .................................................................................................... 94
11.1 Configure the settings relating to the image capture mode [JPEG/H.264] .. ..............94
11.2 Configure the settings relating to JPEG images [JPEG/H.264] .. ................................95
11.3 Configure the settings relating to H.264 images [JPEG/H.264] .. ................................97
11.4 Configure the settings...")
11 Configure the settings relating to images and audio [Image/Audio] .. .................................................................................................... 94 11.1 Configure the settings relating to the image capture mode [JPEG/H.264] .. ..............94 11.2 Configure the settings relating to JPEG images [JPEG/H.264] .. ................................95 11.3 Configure the settings relating to H.264 images [JPEG/H.264] .. ................................97 11.4 Configure the settings...
Page 6
15.2.5 Configure the HTTPS settings ...................................................................................... 173 15.2.6 Configure the settings relating to DDNS .. ....................................................................175 15.2.7 Configure the settings relating to SNMP .. ....................................................................175 15.2.8 Configure the Diffserv settings .. ................................................................................... 176 15.3 How...
Page 7
![Page 7
1 Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC.
1.1 Monitor images from a single camera 1.Start up the web browser.
2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of the
browser.
• Example when entering an IPv4 address: http://URL registered using IPv4 address
http://192.168.0.10/
• Example when entering an IPv6 address: http://[URL registered using IPv6 address]
http://[2001:db8::10]/...](http://img.usermanuals.tech/thumb/58/73661/w300_wv-sfv481_operating_instructions_d-6.png "Page 7
1 Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC.
1.1 Monitor images from a single camera 1.Start up the web browser.
2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of the
browser.
• Example when entering an IPv4 address: http://URL registered using IPv4 address
http://192.168.0.10/
• Example when entering an IPv6 address: http://[URL registered using IPv6 address]
http://[2001:db8::10]/...")
1 Monitor images on a PCThe following are descriptions of how to monitor images from the camera on a PC. 1.1 Monitor images from a single camera 1.Start up the web browser. 2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of the browser. • Example when entering an IPv4 address: http://URL registered using IPv4 address http://192.168.0.10/ • Example when entering an IPv6 address: http://[URL registered using IPv6 address] http://[2001:db8::10]/...
Page 8
![Page 8
3.Press the [Enter] key on the keyboard.
→ The “Live” page will be displayed. Refer to page 19 for further information about the “Live” page.
When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live
images for the user name and password entries. The default user name and password are as follows.
User name: admin
Password: 12345
IMPORTANT
•To enhance the security, change the password for the user name “admin”. It is recommended to change
this password...](http://img.usermanuals.tech/thumb/58/73661/w300_wv-sfv481_operating_instructions_d-7.png "Page 8
3.Press the [Enter] key on the keyboard.
→ The “Live” page will be displayed. Refer to page 19 for further information about the “Live” page.
When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live
images for the user name and password entries. The default user name and password are as follows.
User name: admin
Password: 12345
IMPORTANT
•To enhance the security, change the password for the user name “admin”. It is recommended to change
this password...")
3.Press the [Enter] key on the keyboard. → The “Live” page will be displayed. Refer to page 19 for further information about the “Live” page. When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live images for the user name and password entries. The default user name and password are as follows. User name: admin Password: 12345 IMPORTANT •To enhance the security, change the password for the user name “admin”. It is recommended to change this password...
Page 9
![Page 9
–9M Fisheye/Double Panorama/Panorama/Quad PTZ/Single PTZ/4M Fisheye + Double
Panorama/4M Fisheye + Panorama/4M Fisheye + Quad PTZ: max. 15fps
– 8M Fisheye + Double Panorama/8M Fisheye + Panorama/8M Fisheye + Quad PTZ: max. 6fps
Note that JPEG images cannot be displayed when Quad stream is selected.
1.2 About live image types The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/
H.264] tab of the “Image/Audio” page of the setup menu. ( ®page 94)...](http://img.usermanuals.tech/thumb/58/73661/w300_wv-sfv481_operating_instructions_d-8.png "Page 9
–9M Fisheye/Double Panorama/Panorama/Quad PTZ/Single PTZ/4M Fisheye + Double
Panorama/4M Fisheye + Panorama/4M Fisheye + Quad PTZ: max. 15fps
– 8M Fisheye + Double Panorama/8M Fisheye + Panorama/8M Fisheye + Quad PTZ: max. 6fps
Note that JPEG images cannot be displayed when Quad stream is selected.
1.2 About live image types The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/
H.264] tab of the “Image/Audio” page of the setup menu. ( ®page 94)...")
–9M Fisheye/Double Panorama/Panorama/Quad PTZ/Single PTZ/4M Fisheye + Double Panorama/4M Fisheye + Panorama/4M Fisheye + Quad PTZ: max. 15fps – 8M Fisheye + Double Panorama/8M Fisheye + Panorama/8M Fisheye + Quad PTZ: max. 6fps Note that JPEG images cannot be displayed when Quad stream is selected. 1.2 About live image types The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/ H.264] tab of the “Image/Audio” page of the setup menu. ( ®page 94)...
Page 10
*1Ceiling mounting may also be possible depending on the mounting conditions. 1.2.2 About image capture mode The maximum image capture size that can be configured is 9 megapixel (2992(H)x2992(V)). The following types of images can be transmitted by each mode. Image capture modeDescription9M FisheyeFisheye images are transmitted. (Max. 15fps) The maximum image capture size that can be configured is 9 megapixel (2992 (H)x2992(V)).4M FisheyeFisheye images are transmitted. (Max. 30fps) The maximum image...