Panasonic Network Camera Wv Sfv481 Operating Instructions

[AUX] buttons*2
These buttons will be displayed only when  “Terminal 3 ” of  “Alarm”  is set to  “AUX output ” on the setup menu.
( ® page 134)
• [Open] button:  The letters “Open” on the button will turn green and the status of the AUX connector
will be open.
• [Close] button:  The letters “Close”  on the button will turn green and the status of the AUX connector
will be closed.
[Rec. on SD] button *2
This button will be displayed only when “Manual” is selected for “Save trigger” on the setup menu.
( ®...

[Control Image] pull-down menu
When the image type is Quad PTZ, select the screen number of the image to control its preset, zoom,
control pad/button settings.
[Preset] *2
When a preset position is selected from the pull-down menu and the [Go] button is clicked, the image
registered for the preset position ( ®page 115) in advance is displayed. “H” next to the preset position
number indicates the home position. When  “Home position ” is selected, the camera image will move to the
home position image. When...

Audio volume can be adjusted (Low/ Middle/ High) by moving the volume cursor .
Note•The volume cursor is not displayed when the “Audio recording” function is used.
Audio output button *3
Turns on/off the audio transmission (play audio from the PC on the unit speaker). This button will be
displayed only when “Audio output”, “Interactive(Full-duplex)” or “Interactive(Half-duplex)” is selected for
“Audio transmission/reception” on the setup menu. ( ®page 128)
The button will blink during the audio...

•Zoom can be adjusted using the mouse wheel.
–When the image type is Fisheye, Panorama, or Double Panorama:
• Electronic zoom can be performed with the scroll wheel.
• When clicking a desired point while displaying live images at x2 or x4 in the main area, the camera
will move to locate the clicked point at the center of the main area.
Note
•When the camera is operated by a user with a low access level, images displayed on the screen
may be changed temporarily. This does not affect operation of the...

1.6  Monitor images from multiple camerasImages from multiple cameras can be displayed on a multi -screen. Images from 4 cameras  (up to 16 cameras)
can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in
advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered.
( ® page 132)
IMPORTANT
•When displaying images on a 16 -screen, panning, tilting and zooming operations become unavailable
for images from cameras with...

Click a camera title. Live images from the camera corresponding to the clicked camera title will be
displayed on the “Live” page of the newly opened window.26Operating Instructions
1 Monitor images on a PC  

2   Monitor images on a cellular phone/mobile
terminal
2.1  Monitor images on a cellular phone It is possible to connect to the camera using a cellular phone via the Internet and monitor images  (JPEG only)
from the camera on the screen of the cellular phone. You can also update the display to see the latest images.
IMPORTANT
•When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the...

•When the “Image capture mode” type is “2 Monitor”, the types of images configured in the “Image
capture size” of “"Live" page (Initial display)” are displayed. ( ®page 95)
Pan/tilt *2
 *3
The display position of camera images can be controlled by panning and tilting. The camera will pan
or tilt to each direction by pressing the corresponding dial key.
Zoom display *2
 *3
It is possible to perform zooming operations of the camera by pressing “*” or “#”.
Refresh control
Press the dial key “5” or...

Resolution control
Changes the image capture size by pressing the dial key “0”.
• Changes the image capture size between 320x320 (320x240 or 320x180) (default) and 640x640
(640x480 or 640x360).
Home position *2
 *3
The image from the camera can be moved to the home position.
Preset *2
 *3
The camera will move to the designated preset position to display images by pressing the dial key
corresponding to the desired channel. (The dial key numbers are not displayed for Preset No 5 or
greater. Only preset IDs...

When an Android terminal is used, an MJPEG format image is displayed by the Firefox®
 browser, but a JPEG
format image is displayed by the standard browser.
For further information about compatible devices, refer to our website
(http://security.panasonic.com/pss/security/support/info.html).
IMPORTANT
•When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the...