Panasonic Multi-Function Printer Kx Mb2060 Kx Mb2061 Operating Instructions

Feature/CodeSelectionSetting the recording paper
size in the manual input tray
M B NM3NM 8NM 1NM1 N “ LETTER ” (default): Letter-size paper
M 2 N “ A4 ”: A4-size paper
M 3 N “ LEGAL ”: Legal-size paper
M 4 N “ B5(ISO) ”: B5(ISO)-size paper
M 5 N “ B5(JIS) ”: B5(JIS)-size paper
M 6 N “ 16K ”: 16K-size paper
M 7 N “ 8.5X13 ”
M 8 N “ 8.5X13.4 ”
Note:
R When you set feature #147 to  “MILLIMETERS ”, the numbers are displayed
in millimeters.Setting the recording paper
type for paper input tray
M B NM3NM 8NM...

Feature/CodeSelectionSetting toner save feature
M B NM4NM 8NM 2NM0 N “ OFF ” (default): Deactivates this feature.
M 1 N “ ON ”: The toner cartridge will last longer.
Note:
R This feature may lower the print quality by reducing toner consumption.
R This setting is valid for copying, and when the unit automatically prints
reports/lists.
R This setting is invalid for printing received faxes.
*1 When this setting is changed using the base unit, the setting for the cordless handset (KX -MB2060 optional) will...

11.1.2 Fax featuresFeature/CodeSelectionErasing all items stored for
the one -touch dial and shared
phonebook
M B NM2NM 8NM 9NM0 N “ NO ” (default)
M 1 N “ YES ”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. MMenu N A  M B NM2NM 8NM 9N
2. Press  M1 N to select  “YES ”.  A  M Set N
3. Press  M1 N to select  “YES ”.  A  M Set N A  M Menu NPrinting a confirmation
report
M B NM4NM 0NM 1NM0 N “ OFF ”: Confirmation reports will not be...

Feature/CodeSelectionSending a fax at a specific
time
M B NM4NM 1NM 2NThis feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
M 0 N “ OFF ” (default)
M 1 N “ ON ”
To send a document:
1. If the  MFax N light is OFF, turn it ON by pressing  MFax N.
2. Set the original (page 25).
3. If necessary, change the resolution (page 57) and the contrast (page 57).
4. MMenu N A  M B NM4NM 1NM 2N
5....

Feature/CodeSelectionActivating the Distinctive
Ring feature
MBNM 4NM 3NM 0NM0 N “ OFF ” (default)
M 1 N “ ON ”
See page 68 for details.Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM 4NM 3NM 1NM1 N “ A ”
M 2 N “ B ”
M 3 N “ C ”
M 4 N “ D ”
M 5 N “ B-D ” (default)
See page 68 for details.Setting auto reduction
feature
M B NM4NM 3NM 2NTo receive a fax document that is longer than your recording paper.
M 0 N “ OFF ”: Deactivates this feature.
M 1 N “ ON ” (default): The unit will fit...

Feature/CodeSelectionReceiving a fax into the
computer
M B NM4NM 4NM 2NIf you wish to receive a fax into a computer, activate this feature and run  [PC
FAX]  from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature #448
on page 66).
M 0 N “ OFF ” (default): Deactivates this feature.
M 1 N “ ALWAYS ”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will...

Feature/CodeSelectionSetting the PC information for
notification of fax reception
(LAN connection only)
R This feature can be
programmed only through
the web browser interface.Select the PC to send fax reception notification message to (up to 6
destinations).
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Device Configuration]
3. Type  “root”  as the user name, then enter the password (feature #155 on
page 79).  A [OK]
4. Select the  [FAX FEATURE]  tab.
5. Click  [Edit]...

11.1.3 TAM featuresFeature/CodeSelectionSelecting the voice prompt
MBNM 1NM 1NM 2NThe voice guidance will be heard in the selected language.
M 1 N “ ENGLISH ” (default): English is used.
M 2 N “ SPANISH ”: Spanish is used.Changing the maximum
recording time for incoming
messages *1
MBNM 3NM 0NM 5NM1 N “ 1 MINUTE ”
M 2 N “ GREET ONLY ”: The unit plays the greeting message but does not record
any incoming messages.
M 3 N “ 3 MINUTES ” (default)
Note:
R You can also program this feature with the cordless...

Feature/CodeSelectionSetting the TAM to email
destinations (LAN connection
only)
R This feature can be
programmed only through
the web browser interface.Select email destinations where you want to send incoming voice messages
automatically (up to 6 destinations).
Important:
R Program the email server settings (page 97), and the email
destinations (page 98) beforehand.
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Device Configuration]
3. Type  “root”  as the user name,...

11.1.4 Copy featuresFeature/CodeSelectionSetting the input tray to use
for copy
M B NM4NM 6NM 0NM1 N “ #1 ” (default): The paper input tray is selected. The displayed paper size
depends on the recording paper size setting (feature #380 on page 80).
M 2 N “ #2 ”: The manual input tray is selected. The displayed paper size depends
on the recording paper size setting (feature #381 on page 81).Changing the default copy
resolution
M B NM4NM 6NM 1NTo change the default resolution setting for copying.
M 1 N “...