Panasonic Multi-Function Printer Kx Mb2060 Kx Mb2061 Operating Instructions

ProblemCause & SolutionStatic, sound cuts in/out,
fades. Interference from other
electrical units.R Place the cordless handset and the base unit away from other electrical
appliances.
R Move closer to the base unit.Noise is heard, sound cuts in
and out.R You are using the cordless handset or base unit in an area with high
electrical interference. Re-position the base unit and use the cordless
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we...

14.3.8 Network (LAN connection only)ProblemCause & SolutionI cannot operate the following
functions.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device MonitorRConfirm the LED via the LAN port of the main board. If the LED is glowing
or blinking, network access is working correctly.
If the LED is not glowing or blinking, confirm the LAN cable (Category 5
(Cat-5) Ethernet cable) is connected to the LAN port of the main board
correctly.
R If the LED is blinking and you cannot perform the desired...

ProblemCause & SolutionThe [Windows Security Alert]
dialog box appears and asks
if I want to block
[PCCMFLPD] and I cannot
operate the following
functions after installing the
Microsoft Windows XP
Service Pack 2 or later.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device MonitorRClick  [Keep Blocking]  and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 124).
14.3.9 Answering machine
ProblemCause & SolutionI cannot receive a voice
message on...

RThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
R Fax transmission and reception will be interrupted.
R Documents during fax transmission or fax reception will be lost.
R When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
14.3.11 Firewall setting tool for Microsoft Windows XP Service Pack 2 or later/Windows Vista/
Windows 7...

You can modify or add a printer driver, as follows:
1 Start Windows and insert the KX-MB200/KX-MB700/KX-FLB880 series CD-ROM into your CD-ROM drive.
R If the  [Select Language]  dialog box appears, select the desired language that you want to use with this
software. Click  [OK].
2 [Easy installation]
3 [Modify]  A  [Next]
4 Select  [Modify Utility]  or [Add Printer Driver] . A  [Next] . Then follow the on-screen instructions.Important:
R For users of versions prior to 1.12, download the latest software...

15.1 Recording paper jam
Caution:
R Do not pull out the jammed paper forcibly before
opening the top cover.
R To prevent injuries, be careful not to put your
hands under the top cover.
15.1.1 When the recording paper has jammed
inside of the unit
The display will show the following:
– “PAPER JAMMED ”
   L
“ OPEN TOP COVER ”
– “CHECK REAR COVER ”
Case 1:
When the recording paper has jammed near the
manual input tray:
1. Pull open the paper input tray ( A).
2. Open the manual input tray ( B) and remove...

3.Close the paper input tray.
ROpen and close the top cover ( D) to clear the
message.
Case 2:
When the recording paper has jammed near the
drum and toner cartridge:
1. Pull open the paper input tray ( A).
2. Open the top cover ( B) by holding the indentations
( C ) on both sides of the base unit.
Caution:
R The fuser unit ( D) gets hot. Do
not touch it.
Note:
R Do not touch the transfer roller ( E).
12715. Paper JamsD A D
E
B
C
C   

3.Remove the jammed paper ( F) carefully by pulling it
upwards.
Remove the jammed paper ( G) carefully by pulling it
toward you.
4. Close the paper input tray.
5.
Close the top cover by holding the indentations on
both sides of the base unit, until locked.
12815. Paper JamsF G    

Case 3:
When the recording paper has jammed near the fuser
unit:
1. Open the top cover ( A) by holding the indentations
( B ) on both sides of the base unit.Caution:
R The fuser unit ( C) gets hot. Do
not touch it.
Note:
R Do not touch the transfer roller ( D).
2. Lift both green levers ( E) until they stop.
3. Remove the jammed paper (
F) carefully by pulling it
upwards.
4. Push back the green levers (
G) to the original
position.
12915. Paper JamsDA
B
B
C  E F G  

5.Close the top cover by holding the indentations on
both sides of the base unit, until locked.15.1.2 When the recording paper is not fed
into the unit properly
The display will show the following:
– “CHECK PAPER #1 PRESS START ”
1 Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2 Re-load the recording paper.
3Insert the paper input tray into the base unit, lifting
the front part of the tray....