Panasonic Multi-Function Printer Kx Mb2060 Kx Mb2061 Operating Instructions

11.1.5 PC print featuresFeature/CodeSelectionChanging the data timeout
setting
M B NM7NM 7NM 4NThe unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. MMenu N A  M B NM7NM 7NM 4N A  M Set N
2. Enter the desired data timeout setting from  “005 ” seconds to  “600 ”
seconds, using the dial keypad.
R The default setting is  “060 ” seconds.
3. MSet N A  M Menu NSetting mutual A4/letter print
M B NM7NM 7NM 6NThis feature allows...

11.1.6 Scan featuresFeature/CodeSelectionSetting the scan mode for
Push Scan
M B NM4NM 9NM 3NM1 N “ VIEWER ” (default): The scanned image will be displayed in the
[Multi-Function Viewer]  window.
M 2 N “ FILE ”: The scanned image will be saved as a file.
M 3 N “ EMAIL ”: The scanned image will be saved for email attachment.
M 4 N “ OCR ”: The scanned image will be displayed in the OCR window.
M 5 N “ EMAIL ADDRESS ”: The scanned image will be sent as an attachment
without using email software.
M 6 N “...

Feature/CodeSelectionSetting the information for
scan to SMB folder (LAN
connection only)
R This feature can be
programmed only through
the web browser interface.When you send scanned files to an SMB folder, you can register the SMB folder
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Device Configuration]
3. Type  “root”  as the user name, then enter the password (feature #155 on
page...

11.1.7 LAN featuresFeature/CodeSelectionLAN setting with a DHCP
server
M B NM5NM 0NM 0NM0 N “ DISABLED ”: Deactivates this feature.
M 1 N “ ENABLED ” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gatewaySetting the IP address for the
LAN connection
M B NM5NM 0NM 1NThis feature is available when feature #500 is deactivated.
1. MMenu N A  M B NM5NM 0NM 1N A  M Set N
2. Enter the IP address of the unit...

Feature/CodeSelectionApproving users for the LAN
connection
M B NM5NM 3NM 2NM0 N “ DISABLED ” (default): Deactivates this feature.
M 1 N “ ENABLED ”: The unit will deny/approve access from the pre-programmed
IP patterns. You can program whether to deny or approve IP addresses. Up to
4 patterns each for IPv4 and IPv6 can be programmed through the web browser
interface.
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Network Configuration]
3. Type  “root”  as the user...

Feature/CodeSelectionErasing all email addresses,
FTP destinations, and SMB
folder destinations stored in
the unit
M B NM5NM 7NM 8NM0 N “ NO ” (default)
M 1 N “ YES ”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all email addresses:
1. MMenu N A  M B NM5NM 7NM 8N
2. Press  M1 N to select  “YES ”.  A  M Set N
3. Press  M1 N to select  “YES ”.  A  M Set N A  M Menu N
To erase FTP destinations:
1. MMenu N A  M B NM5NM 7NM 8N
2. Press  M1 N to select...

11.1.8 Network features (LAN connection only)
These features can be programmed through the web browser interface.FeatureTabSelectionSetting the LAN features[LAN FEATURE]Enter the LAN feature settings. See page  94 for details.Setting the community
name for SNMP[SNMP]Enter the SNMP community name. Consult your service
provider or network administrator for details.Setting the location
where you use this unit[SNMP]Enter the location information of the unit.Displaying the link local
address for IPv6[IPv6]The...

FeatureTabSelectionRegistering the email
address destinations[EMAIL FEATURE]Register email destinations (up to 30 destinations).
These addresses can be used as destinations for the
following features.
– Scan to email address (page 38)
– TAM to email address (page 63)
– Fax to email address (page 63, 64)
– Voice to email address (page 71)
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A
[Network Configuration]
3. Type  “root”  as the user name, then enter the
password...

11.2 Cordless handset programming (KX-MB2060 optional)
To access the features, there are 2 methods:
– scrolling through the display menus (page 99)
– using the direct commands (page 100)
R Direct command is the main method used in these operating instructions.
11.2.1 Cordless handset features
Programming by scrolling through the display menus
1. MMENU N (soft key  A)
2. Press  MC N or  MD N to select the desired main menu.
A  M SELECT N (soft key  A)
3. Press  MC N or  MD N to select the desired item in...

Top-menuSub-menu 1Sub-menu 2Feature (default setting)“Initial
setting ”“Ringer setting ”“Ringer volume ”*3
, *4Cordless handset ringer volume
( Maximum ): page 27“Ringer
tone ”*3
, *5
, *6
, *7Ringtones for outside calls (
“Tone
1 ”)“Silent mode ”*3
– “On/Off ”
– “Start/End ”Set the silent mode: page 51
– ( “Off ”)
– ( “11:00 PM/06:00 AM ”)“Set date & time ”“Date and time ”*1Date and time: page 28“
Alarm ”Set the alarm ( “Off ”): page 103“Handset name ”–Change the handset name:
page 103“ Voice mail...