Panasonic Matrix Switcher Wj Sx150a Operating Instructions

74
SWITCHER:Select a unit (SLAVE1 to 4 and MASTER*) to
configure the parameters.
* In normal connection, only MASTER is displayed.
CAM:This stands for a camera channel of the unit.
LCN:This stands for a logical camera number. 1 to 99 is
selectable.
COMP:This stands for cable compensation. Select the
desired setting according to the cable length.
S:Less than 400 m (1 300 ft)
M:400 m (1 300 ft) to 700 m (2 300 ft)
L:700 m (2 300 ft) to 900 m (3 000 ft)
Refer to p. 36 for available cables.
The factory...

75
Port 740 CAMERA/DATA1-4 PORT
  SWITCHER=MASTER(5 of 5)
     PORT      MODE           SPEED
     CAMERA    TERMINAL-K1     9600bps
     DATA1     TERMINAL-K2     9600bps
     DATA2     TERMINAL-K3     9600bps
     DATA3     MASTER-SLAVE   38400bps
     DATA4     PS-DATA         9600bps
     HDR       HDR             9600bps
     SERIAL    PC             38400bps
Master unit setting for Master-Slave connection 
Slave unit setting for Master-Slave connection 
SWITCHER:Select a unit (SLAVE1 to 4 and...

76
• RS485 CAMERA
This menu links to the submenu.
Move the cursor and press the CAM (SET) button to go into
the menu. 750 RS485 CAMERA will appear on the monitor.
SWITCHER:Select a unit (SLAVE1 to 4 and MASTER*)
to configure the parameters.
* In normal connection, only MASTER is displayed.
CAM:This stands for a camera channel of the unit.
LCN:This stands for a logical camera number.
PORT:This stands for a port which connects the cam-
era.
RS485:Select this when the camera is connected
to the RS-485...

77
■MULTIPLEXER
●How to Display
To display this menu on the monitor, move the cursor to 900
MULTIPLEXER in SETUP MENU by moving the joystick to
Dor C. Then, press the CAM (SET) button. The submenu
appears on the monitor.
●Parameters
Move the joystick to move the cursor.
Press the NEXT or PREV button to select the desired para-
meters.
SWITCHER:Select a unit (SLAVE1 to 4 and MASTER*) to
configure the parameters.
* In normal connection, only MASTER is displayed.
Ver. ∗. ∗∗:Firmware version of a Multiplexer...

78
• NORMAL
EXT.:Select this to gen-lock the unit during the normal
operation.
002,004 to 255 (field):Select one of these normal
recording rates if the asynchronous unit is connect-
ed to the unit. 
The factory default setting is EXT.
• DYNAMIC REC
PRI.:Select this to give recording priority to the camera
channel with the alarm input.
ONLY:Select this to record the images from the alarm-
associated camera channel.
GROUP:Select this to give recording priority to a group
of up to 4 camera channels...

79
Trademarks
•IBM is a trademark of International Business Machines
Corporation.
•Intel and Pentium are trademarks of Intel Corporation.
•Microsoft
® Windows®are either registered trademarks
of Microsoft Corporation in the United States and/or
other countries.
•VD2 is the original synchronization system of
Matsushita Electric Industrial Co., Ltd.
•Other company names and product names appearing
in the manual are registered trademarks or trademarks
of the company concerned.
Platform
To install WJ-SX150A...

80
3. When terminating the software, click on the EXIT button
or press the ESC button on the PC keyboard. The main
window will close and WJ-SX150A Administrator
Console will be terminated.
Note: The operator name and password are changeable.
Operator addition is also available. The configuration of
each operator name, password and level are neces-
sary. (Refer to p. 101 Account Manager.)
■The Main Window
This window appears when starting up WJ-SX150A
Administrator Console.
Clicking on each button in the...

81
(Multiplexer Mode): 
Multiplexer Mode window (p. 98)
(Multiplexer Title): 
Multiplexer Title window (p. 100)
In addition, the main window has the following buttons.
(New):
New window (p. 101)
(File Open):
Select Setup Data File window (p. 101)
(Account Manager):
Account Manager window (p. 101)
(Communication Port):
Communication Port window (p. 102)
(Panasonic):
Opens the version information window of WJ-
SX150A Administrator Console. Clicking on OK
button will close the window.
Note:To reflect each...

82
• Slave
Slave units and connected recorders are displayed. To
activate/deactivate Slave units, click the ON/OFF button of
a desired Slave unit. When Slave units are set to ON, their
unit names become selectable in SETUP MENU to config-
ure the parameters. 
(Save Exit) button
Saves the configuration and closes the Master-Slave win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Master-Slave win-
dow.
Notes:
•If you configure the master-slave composition, settings
concerning LCN...

83
■Put a file to SX150A
Pressing this button will start the putting of the configuration
file from the PC to the unit.
●How to Display
To display this window, click on the  (Put to
SX150A) button in the main window (p. 80).
●Parameters
The file name of the configuration data appears.
(OK) button
To put the configuration file from the PC to the unit, click on
this button.
(Cancel Exit) button
To cancel the putting of the configuration file from the PC to
the unit, click on this button.
Notes:
•The setup...